Instruction/ maintenance manual of the product EI 103C Ei Electronics
Go to page of 3
1. Basic Information about your Heat Alarm A Heat Alarm is an early warning device. A system based on in - terconnected Heat Alarms and Smoke Alarms, can give you and your family valuable extra time to escape. Note:- · Install correctly, in the centre of the ceiling if possible.
1. Pull Cover open at Tab (2). Do not remove Cover from base. 2. Place the Base on ceiling or wall exactly where you want to mount the unit. With a pencil, mark the location of the Screw Holes (6) 3. Taking care to avoid any electrical wiring in the ceiling, drill a hole through the centers of the marked locations.
· Heat Alarms will not work if the batteries are depleted or if they are not connected, or if the wrong type of battery is used. Test regularly and replace batteries at least yearly or when depleted. · Alarms will not detect fire if sufficient heat/smoke does not reach the alarms.
An important point after buying a device Ei Electronics EI 103C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ei Electronics EI 103C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ei Electronics EI 103C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ei Electronics EI 103C you will learn all the available features of the product, as well as information on its operation. The information that you get Ei Electronics EI 103C will certainly help you make a decision on the purchase.
If you already are a holder of Ei Electronics EI 103C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ei Electronics EI 103C.
However, one of the most important roles played by the user manual is to help in solving problems with Ei Electronics EI 103C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ei Electronics EI 103C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
