Instruction/ maintenance manual of the product V-44SW E1 Edirol
Go to page of 72
Owner’s Manual Copyright © 2006 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (p.
2 IMPORTANT SAFETY CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 Table of Contents Introduction 4 Main Features ...................................................................... 4 USING THE UNIT SAFELY .................................................. 6 IMPORTANT NOTES ......................................
4 Introduction Main Features ● You can enjoy free use of the four SD inputs and four inputs for HD video or RGB video from computers. The V-44SW is compatible with HD (1080i/720p; component), SD (S-.
5 Main Features ● You can have transitions appear smoothly when switching video. The V-44SW features a selection of screen transition effects, including six types of wipe effects as well as cut and mix effects. You can have such screen transition effects be applied simply by selecting a button.
6 USING THE UNIT SAFELY 001 ● Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 001-50 ● Connect mains plug of this model to a mains socket outlet with a protective earthing connection.
7 USING THE UNIT SAFELY 014 ● Protect the unit from strong impact. (Do not drop it!) .......................................................................................................... 015 ● Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices.
8 IMPORTANT NOTES In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 6–7, please read and observe the following: 301 ● Do not .
9 Overview of the V-44SW The V-44SW comprises two main sections, an “SD section,” used for managing all SD video, and an “HD/RGB section,” which is used to mix all video signals. Composite video signals and S-video signals are mixed in the SD section.
10 Panel Descriptions [MIDI] Button ● This switches reception of MIDI signals on and off. When switched off, the [MIDI] button is unlit, and the V- 44SW does not receive MIDI signals.
11 Panel Descriptions [KEY] Button This switches the Key Composite effect on and off. The [KEY] button lights when the effect is on. ☞ “Applying the Key Composite Effect” (p. 41) TRANSITION Select Buttons These select the effect to be applied when the video images are switched.
12 Panel Descriptions AC Inlet Connect the supplied power cord here. Security Slot ( ) You can attach a commercially available security lock here. http://www.kensington.com/ HD/RGB OUT ● HD/RGB OUT PGM Connectors 1, 2 These output the final output video as analog component signals or RGB signals.
13 The V-44SW includes the following items. Please take a moment to confirm that all of these items have been included with the V-44SW. If you find that any item is missing, contact the nearest authorized EDIROL/Roland distributor in your country. ❏ V-44SW ❏ Power Cord ❏ Owner’s Manual ❏ Operation Reference 1.
14 Setup and Settings Guide ● Whenever connecting the V-44SW to other devices, always turn off the power to all devices to prevent malfunction and/ or damage to video monitors and other equipment. ● Be sure to use cables and adapter plugs with the proper connectors matching those of the other devices you are using.
15 Setup and Settings Guide The V-44SW is set at the factory so that if video is input via both the S-VIDEO IN connector and the COMPOSITE IN connector for the same channel, the S-VIDEO IN connector’s input takes precedence. ● If you want to give priority to the input from the COMPOSITE IN connector, select the input channel with “2.
16 Setup and Settings Guide Turn on the power to the connected devices (with video devices, play back the video). Press the [POWER] switch at the right of the V-44SW’s front panel to switch it to the ON position and turn on the power. ( ☞ p. 26). Press one of the OUTPUT FORMAT buttons [1080i], [720p], or [RGB] to select the output video format.
17 Setup and Settings Guide Press the [MENU] button to display the Main menu. Select “1. Output” to display the sub-menu. Select the necessary parameters from the table below, then adjust the brightness, hue, and other such settings for the final output video.
18 Setup and Settings Guide Use the V-44SW’s component output for shows and other situations where the video is being output to plasma displays or high definition projectors Make the following menu parameter settings. Set the parameters in accordance with your usage environment.
19 Setup and Settings Guide In business presentations and other such situations, use the V-44SW’s RGB output when outputting video to a data projector. Make the following menu parameter settings. Set the parameters in accordance with your usage environment.
20 Setup and Settings Guide In shows and other situations where SD video is being output to LED displays or similar displays, you can output video from the V-44SW’s HD/RGB OUT PGM connectors. Make the following menu parameter settings. Set the parameters in accordance with your usage environment.
21 Setup and Settings Guide When recording the V-44SW’s video output with an HD CAM deck, DVC PRO HD deck, HD non-linear editing device, or other such equipment, it may be necessary to convert the V-44SW’s component output to HD-SDI signals.
22 Quick Guide When you have finished connecting and making the settings, try switching and outputting some video images. The method for switching video described in this section uses what is referred to as “Direct mode.” In addition to “Direct mode,” the V-44SW also features a “Preset mode” you can use for switching video.
23 Quick Guide The V-44SW features a selection of screen transition effects, including six types of wipe effects as well as cut and mix effects. Now try changing the screen transition effects to switch the video in various different ways.
24 Quick Guide V-44SW_e.book 24 ページ ２００６年１０月２３日 月曜日 午後３時２５分.
25 Operation Guide V-44SW_e.book 25 ページ ２００６年１０月２３日 月曜日 午後３時２５分.
26 Basic Operation ● This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. 1 Confirm that all other devices are properly connected. 2 witch the [POWER] switch at the right of the V-44SW’s front panel to ON.
27 Basic Operation ■ Working with the Menus 1 Press the [MENU] button to display the Main menu. 2 Use the [CURSOR/VALUE] knob to select a parameter. Rotating the [CURSOR/VALUE] knob moves the cursor vertically on the screen. The parameter where the cursor is located flashes, indicating that this parameter is selected.
28 Basic Operation You can fade out the final output. This convenient function allows you to output black (or white) video when useful, such as during pauses for standby and at the ends of presentations. 1 Set the fade time with the [TIME] knob. You can set the fade time to any value from 0.
29 Basic Operation You can return the content of the settings to their original status at the time the V-44SW shipped from the factory. Try running Factory Reset when the V-44SW functions differently than described in the Owner’s Manual, even though you’ve carried out the procedures according to the instructions.
30 Setting the Input and Output The V-44SW handles input and output video in differing video formats, thus requiring adjustment of the image quality and field of view for each format.
31 Setting the Input and Output <Component> ● The component format settings include “60” and “50” frame rate settings. The general frame rate setting for Japan and the United States (NTSC) is “60” frames per second; the general setting in Europe (PAL) is “50.
32 Setting the Input and Output With HD/RGB video, since the field of view and color may vary according to the format and device, be sure to make these settings for each input 1 Press the [MENU] button to display the Main menu.
33 Setting the Input and Output You can scale (enlarge or reduce) input video with a different aspect ratio (the ratio of the screen’s vertical and horizontal dimensions) to match that of the output format (p. 30) to have the video appear in the proper aspect ratio.
34 Setting the Input and Output With SD video, there can be individual differences depending on the type of device, so settings for the input should be made individually. 1 Press the [MENU] button to display the Main menu. 2 Select “2. SD Input” and then select the channel you want to set with “1: SD Ch1”–“4: SD Ch4” in the sub- menu.
35 Setting the Input and Output The V-44SW’s input and output formats are selectable; you can specify the NTSC format used in Japan and the United States or the PAL format used in Europe. Switch to the format suited to your needs. ● Switching the input and output formats also switches the frame rate of the output format of component (p.
36 Switching Video The V-44SW features two different video switching modes, “Direct mode” and “Preset mode.” Each mode functions in switching video as follows. The final output video is switched when channels are selected with the press of a single button.
37 Switching Video ● Immediately after the power is turned on, SD VIDEO Channel 1 is assigned as the final output. 1 Press one of the SD VIDEO buttons [1]–[4] or one of the HD/RGB buttons [1]–[4] to select the channel.
38 Switching Video The V-44SW features a selection of screen transition effects, including six types of wipe effects as well as cut and mix effects. 1 Press a TRANSITION selection button to select the screen transition effect. The selected button lights up.
39 Adding Effects to the Video You can add effects that combine two different video images. With this effect, the video in the channel to which the Picture in Picture (P in P) effect is applied is sent to the sub-screen, which appears in reduced size within the video on another channel (the background screen).
40 Adding Effects to the Video If the P in P effect is turned off while the sub-screen is still being displayed, the video on the channel assigned to the sub- screen at that time becomes the final output video.
41 Adding Effects to the Video With this effect, the portions matching the key color in the video on the channel to which the key composite effect is applied are made transparent, and the video on the other channel is composited as shown in the figure below.
42 Registering Often-Used Settings ( Panel Presets) You can register button settings, settings for the Picture in Picture (P in P) and other special effects, and other settings as presets. You can register up to fifteen presets. You can call up registered presets instantly just by pressing the PANEL PRESET buttons.
43 Registering Often-Used Settings (Panel Presets) You can call up presets after you have started to fade out the output. 1 Press the [MENU] button to display the Main menu. 2 Select “7. Panel Preset Edit” and select “4: Set Preset Fade Time” from the sub-menu.
44 Using the V-44SW with Other Devices You can link V-44SWs with an Edirol V-440HD in a system of up to six devices to display a single video source across multiple screens.
Using the V-44SW with Other Devices 45 The V-44SW can be controlled from an external device using MIDI. You can, for example, control the V-44SW from a Roland MIDI-compatible product (e.g., a Fantom-X Series keyboard) to conduct video performances synchronized with sounds.
46 Using the V-44SW with Other Devices ■ Controlling the V-44SW from an External Device Via MIDI When V-LINK mode (p. 48) is off, you can transmit the unit’s button and knob operations using MIDI messages. Conversely, you can also use MIDI messages transmitted by external devices to control the V-44SW’s button and knob settings.
47 Using the V-44SW with Other Devices ■ Controlling the V-44SW from a PR-80/50 You can control the V-44SW remotely from an Edirol PR-80 or PR-50 (hereafter referred to as PR Series devices) via MIDI. The following operations can be controlled from the PR Series device.
48 Using the V-44SW with Other Devices V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to connect two or more V-LINK compatible devices, you can easily enjoy performing a wide range of visual effects that are linked to the expressive elements of a music performance.
49 Using the V-44SW with Other Devices You can back up and restore the V-44SW’s settings by transmitting data between the V-44SW and a computer. ● This function requires software supporting backup and restore procedures.
50 Using the V-44SW with Other Devices V-44SW_e.book 50 ページ ２００６年１０月２３日 月曜日 午後３時２５分.
51 Appendices V-44SW_e.book 51 ページ ２００６年１０月２３日 月曜日 午後３時２５分.
52 Troubleshooting If you suspect a malfunction, please check the following points. If this does not resolve the problem, contact a nearby EDIROL/Roland Service Center or an authorized EDIROL/Roland distributor. ● Devices are connected incorrectly Properly reconnect the devices.
53 Troubleshooting Since the V-44SW handles video with differing aspect ratios, if you do not scale (enlarge/reduce) the input video to match the output format, the screen aspect ratio may not display properly. For each input channel, set the “Scaling Type” parameter under “3.
54 Menu List This is the Main menu list displa yed when the [MENU] b utton is pressed. Y ou can select from the f ollowing f or mats for use with the final output. * The selectable component format changes as above depending on the setup for “1: System Frame Rate” under “8.
55 Menu List 2. SD Input Parameters Explanation Sub Menu 1: SD Ch1 Sets video input to Channel 1 of the SD IN connectors Refer to “SD Ch Sub Menu” below.
56 Menu List *1 Cannot be set in HD/RGB SD. Parameter numbers are in sequence, with these parameters omitted. *2 Enabled when Format Auto Detect is set to Manual. *3 Enabled when Pre Scaling Mode is set to Manual. The “Manual Pre Scaling” setting has no effect in the P in P effect (p.
57 Menu List 6. Wipe Select Parameters Explanation Sub Menu 1: Wipe Sw1 Sets WIPE [1] button Refer to “Wipe Sw Sub Menu” below. 2: Wipe Sw2 Sets WIPE [2] button 3: Wipe Sw3 Sets WIPE [3] button 4:.
58 Menu List 8. System Parameters Explanation Values 1: System Frame Rate Switches between NTSC and PAL 60-NTSC, 50-PAL 2: SD Deinterlacer SD section I/P conversion function Off, On 3: SD Input Sync T.
59 MIDI Implementation Chart Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Program Change System Exclusive System Common System Real Time Aux Messages Not.
60 REMOTE Command Reference ● For more information on transmission settings, refer to “Controlling the V-44SW from an External Device Using the REMOTE Connector” (p. 48). A command consists of an ASCII code sequence containing “stx,” three uppercase letters of the alphabet, and a semicolon (“;”).
61 REMOTE Command Reference OUT OUTPUT FORMAT Button Select stxOUT:a; a : 0–2 (0: 1080i, 1: 720p, 2: RGB) This selects the OUTPUT FORMAT button, changing the format of the video output. ACK is returned by the V-44SW upon proper reception of the command.
62 Connector Specifications ■ Inputting and Outputting Analog Component Signals • Connector Type: D-sub 15-pin shrink terminal (female) ■ Inputting and Outputting RGB Signals • Connector Type:.
63 About Connection Cables Used with the Component Inputs and Outputs You can use a D-sub to 5-BNC cable to connect the component inputs and outputs. Check the D-sub to 5-BNC wiring diagram, then correctly connect the (three) BNC connectors.
64 Menu Settings Memo 1. Output 1: Output Format (1080i) Sw 2: Output Format (720p) Sw 3: Output Format (RGB) Sw 4: Output Format Sw Lock 5: Zooming 6: Bright 7: Contrast 8: Saturation 9: Red 10: Green 11: Blue 12: Output Fade Mode 13: Output Fade Color 14: Test Pattern Select 2.
65 Menu Settings Memo 8. System 1: System Frame Rate 2: SD Deinterlacer 3: SD Input Sync Threshold 4: REMOTE Baudrate 5: Seamless Delay Time 6: HD/RGB On Screen Display 7: Panel Operation Mode 8: Input Sw LED Color 9: V-440HD Slave Mode 9.
66 Panel Preset Memo Title: No. Setting Saved 123 45 678 9 1 0 1 3 1 4 1 5 Off Off [MIX] Button SD VIDEO [1] Button 30% -25% +25% 105% 0% 0% 0 Black Hard Original Luminance K ey2 128 3 Auto No fade P .
67 Block Diagram D/A OSD D/A D/A F rame Synchronizer Scaler Scaler F rame Synchronizer F rame Synchronizer F rame Synchronizer A/D A/D A/D A/D HD/RGB IN 1 (D-Sub) HD/RGB IN 2 (D-Sub) HD/RGB IN 3 (D-Su.
68 Main Specifications V-44SW: MULTI-FORMAT VIDEO SWITCHER * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. Video Processing Video Format: SD NTSC or PAL [CVBS, S (Y/C)] HD 1080/59.
69 Index Numerics 16:9 Output ............................................................. 18 4:3 Output ............................................................... 20 A Aspect ratio ............................................................. 33 Automatically setting (RGB input) .
70 Index S Scaling .................................................................... 33 Scaling type ............................................................. 33 SD input .................................................................. 34 SD size (4:3) output .
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
04348034 06-10-1N *04348034-01* Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. As of August 1, 2006 (EDIROL-2) ASIA CHINA Roland Shanghai Electronics Co.
An important point after buying a device Edirol V-44SW E1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edirol V-44SW E1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edirol V-44SW E1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edirol V-44SW E1 you will learn all the available features of the product, as well as information on its operation. The information that you get Edirol V-44SW E1 will certainly help you make a decision on the purchase.
If you already are a holder of Edirol V-44SW E1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edirol V-44SW E1.
However, one of the most important roles played by the user manual is to help in solving problems with Edirol V-44SW E1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edirol V-44SW E1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
