Instruction/ maintenance manual of the product EU-4230 Edimax Technology
Go to page of 17
.
i Copyright © by Edimax T echnology Co, L TD. all right s reserved. No part of this publication may be reproduced, t ransmitted, transcribed, stored in a retrieval system, or translated into any lang.
ii T able of Content s 1. Introduction .......................................................................... 1 Features ............................................................................... 1 Package Contents............................
1 1. Introduction It is a combination 10/100M Ethernet adapter and integrated standard-based 3-port USB hub all in one easy to use device. As a fully integrated USB solution, the new US B/Ethernet adapter allows users to easily connect to the Ethernet network with a complete out of the box, Plug-N-Play solution.
2 2. Inst allation Hardware Connection General instructions for installing t he USB 2.0 3 Port Hub with Ethernet Adapter are provided below . Since the des ign of system may vary , refer to your system’ s reference manual for f urther information, if needed.
3 Driver Inst allation On Windows 2000/XP/Server 2003/V ist a 1. With your computer switched on, insert the “USB2.0 to Fast Ethernet Adapter with 3-Port USB Hub” into an available USB2.0 port of your computer . The fo llowing message will appear on your screen, Please click ‘Cancel’ and use the wizard to install driver .
4 2. Please insert the installation CD into your CDROM drive. The Autorun setup programs sh ould run under Windows 2000/XP/Server 2003/Vista, or you ca n click on the “Browse CD” to find other OS drivers in the CD. 3. Connect the Ethernet adapter ’ s USB end to a free USB port of your computer .
5 *Actual strings depend on your operation system. These screen shots are from Windows Vista and might vary slightly for each operation system. Now the installation is complete. Y ou can connect th e adapter to a network device by an Ethernet cable: 1.
6 On MAC OS X 10.3/10.4 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigat e to the directory of DriversMac10.x. AX88772.
7 4. When the screen below appears, please click Upgrade to perform the software. 5. Please enter your pa ssword as prompted. 6. Please select Continue Installation to install the software when the screen below prompted.
8 7. Please click Restart to reboot the Mac. 8. Connect the Ethernet adapt er to a free USB port. 9. Start System Preferences and select Network , you’ll see the screen as below prompted and please select OK . 10. You will find that a new Ethernet network interface is available.
9 *Actual strings depend on your operation system. These screen shots are from MAC OS X 10.4 and might vary slightly for each operation system. Now the installation is complete. Y ou can connect th e adapter to a network device by an Ethernet cable: 1.
10 V erifying the Driver Inst allation On windows 2000/XP/Server 2003/V ist a Once you finish the installati on, you can open Windows Device Manager to verify if your Ethernet ada pter is properly installed. T o access the Device Manager: On Windows Vi s ta : Right-click Computer on the desktop and click Properties > Device Manager .
11 On MAC OS X 10.3/10.4 Once you finish the installati on, you can open GO > Utilities > System Profile > Hardward > USB > to verify if your Ethernet adapter is properly inst alled. In the USB High-S peed Bus group, an item named ASIXx72A should be displayed.
12 3. S pecifications USB Upstream port x 1 (USB Type A plug) Downstream port x 3 (U SB Type A receptacles) Compliance : USB1.1 & USB 2.0 LAN RJ-45 x 1 (Ethernet 10BASE-T/Fa st Ethernet 100Base-TX.
13 4. Federal Communication Commission Interference S t atement This equipment has been tested and found to comply with the limit s for a Class B digital devi ce, pursuant to Pa rt 15 of FCC Rules. These li mits are designed to provide reason able protection against har mful interference in a residential installation.
14.
An important point after buying a device Edimax Technology EU-4230 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax Technology EU-4230 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax Technology EU-4230 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax Technology EU-4230 you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax Technology EU-4230 will certainly help you make a decision on the purchase.
If you already are a holder of Edimax Technology EU-4230, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax Technology EU-4230.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax Technology EU-4230. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax Technology EU-4230 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
