Instruction/ maintenance manual of the product EW-7238RPd Edimax
Go to page of 24
EW -7238 RPD Quick Inst allation Guide 11 - 201 2 / v1.0.
1 Before you start u sing thi s product , please che ck if there is anything miss ing in the package, and c ontact your deal er to claim the missi ng item(s): LED Color LED Status Description Signal Strength 2.4 GHz Amber On Excellent signal . Signal strength : 6 0 – 100%.
2 LED Color LED Status Description Signal Strength 5 GHz Amber On Excellent signal . Signal strength : 6 0 – 100%. Slow Flashing Good signal. Signal strength : 60 – 40 %. Quick Flashing Poor signal. Signal strength : below 40 %. Off No signal detected or in LED off mode.
3 There are two ways you can quickly setup the Wi-Fi ex tender - using browser-based iQ Setup ( steps 1 - 15 below) or using the WPS but ton (see WPS Setup ). Note: It is recommended that you plug in the extender close to your router/access point for the setup process.
4 i. Plug one end of th e Ethernet cabl e into the Wi-Fi exten der ’ s Ethernet port. Plug the other end of the cabl e into your computer ’ s Ethernet port. i. Use your Wi-Fi dev ice (e.g. computer, ta blet, smartphone) to search for a Wi- Fi network with the SSID “Edimax.
5 4. iQ Setup will displ ay all avail able 2.4GHz and 5GHz Wi -Fi networks, li sted under “SSID” . Pl ease select one or both root Wi -Fi netw orks that your extender will connect to and subseq uently extend . If you don’t wish to u se either the 2.
6 6. For each network you sele ct, you can enter a “De vice SSID” which is a na me to identify the EW -7238RPD ’s Wi -Fi network. If th e root SSID requires a security key, you wil l also be required to enter it here. Note: If you do not know your existing network security key, please refer to the user manual for help.
7 “Cancel” – or select “No” from the drop down menu shown below , before you click “Next”. 8. Please wait while t he Wi-Fi extende r tests the conn ection.
8 Note: When assigning a static IP address to the wireless extender, you need to ensure that you assign an IP address in the same subnet as your network. For example, if your static IP is 192.168.9.2 then you need to assign the wireless extender an IP address in the range 192.
9 Note: After the system has restarted, if you do not see the congratulations screen in Step 11, then please skip straight to step 12. Ty pically, this may occur for smart phone users who setup the extender via a wireless c onnection (as shown in II-1.
10 13. To connect to the ext ende r’s Wi -Fi n etworks: 14. Select the SSID wh ich you named yo ur ex tende r’s Wi -Fi networ k in Step 5 or 6 and en ter your password/security key if yo u set one. Note: Remember to select the SSID of your extender’s Wi -Fi network – not your existing root Wi-Fi network.
11 Windows: Mac: Note: The next section WPS Setup describes an alternative setup method to iQ Setup. If you already completed iQ Setup, it is not necessary to perform WPS Setup.
12 Note: Please ensure the extender is ready (power LED ( ) on, not flashing) before activating WPS. If your wireless rout er/access point supports WPS (Wi -Fi Protected Setup) then you can use t his method to set up your Wi -Fi extender ’s 2.4GHz & 5GHz network.
13 Note: Please check the instructions for your wireless router/access point to confirm how long you need to hold down its WPS button to activate WPS for 2.4GHz or 5G Hz . Some brands of router/access point may not support WPS for 5Ghz – in this case, please use iQ Setup instead.
14 If you experience probl ems with your Wi- Fi extender you can r eset the extender back to f actory default settings. Thi s resets all setti ngs back to default. To reset the extende r, press and hol d the WPS/Reset b utton for 10 seconds until the power LED ( ) is flash ing.
15 Mac: Not e: Please refer to the user manual for detailed guidance on using the browser based configuration interface..
16 If the extender’s 2.4GHz or 5GHz Wi -Fi is disconnected from its root network, your browser will forwar d to the page shown below: The status of th e extender will be displayed, please check your WAN connection and en sure that your rout er/access point is working prop erly.
17 Federal Communic ation Comm ission Interference S tatement This equipment has b een tested and f ound to comply with the limits f or a Class B dig ital device, pursuant to Part 15 of FCC Rules. Th ese limit s are designed t o provide r easonable protecti on again st harmful interfe rence in a residential install ation.
18 EU Declaration of Conformity English: This equipment is in compliance with the essentia l requirement s and other relevant provisions of Directive 1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC. French: Cet équipement est conforme aux exigences essentielles e t autres dispositions de la directive 1999/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.
19 Declaration of Conformity We, Edimax Tec hnology Co., L td ., d eclare un der our sole respo nsibility, that the equipmen t described b elow complies with the requirements of the European R&TTE directive 1999 /5/EC, and 2009/ 125/EC, 2006 /95/EC, 2011/65/EC.
20 Notice Accord ing to GNU General Public License Version 2 This product includes software that is sub ject to the GNU General Pu blic License version 2.
21 intact all the notices that refer to this License and t o the absence of any warranty ; and give any other recipient s of the Program a copy of th is License along with t he Program. You may charge a fee for th e physical act of tra nsferring a cop y, and you may at your option offer warranty protection in exchange for a fee.
22 6. Each time you redistribu te the Program (or an y work based o n the Program), the recipi ent automatically receives a li cense from the original licensor to c opy, distribu te or modify the Program subject to t hese terms and conditio ns.
23.
An important point after buying a device Edimax EW-7238RPd (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax EW-7238RPd yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax EW-7238RPd - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax EW-7238RPd you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax EW-7238RPd will certainly help you make a decision on the purchase.
If you already are a holder of Edimax EW-7238RPd, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax EW-7238RPd.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax EW-7238RPd. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax EW-7238RPd along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
