Instruction/ maintenance manual of the product TBC50S EdgeStar
Go to page of 19
Mini Kegerator Owner’s Manual For more information on other great EdgeStar products on the w eb, go to http://www.edgestar.com TBC50S.
i Important Safety Information Improper handling can cause serious d amage to the EdgeStar mi ni kegerato r and/or injury to the user. This mini kegerator is designed for d omesti c indoor use only. Do not use the unit for industrial or commercial use.
EdgeStar Mini Kegerator ii Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. I INTRODUCTION ............................................................................................
1 Introduction Thank you for purchasing this EdgeStar mini kegerato r. We are glad you chose us. We believe that your purchase of this produ ct ope ns a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship.
EdgeStar Mini Kegerator 2 Parts Identification Optional Accessory Kit (Model: TBC50-ACC) (Sold separately) Three Quarter View Cleaning Bottle Non-Pressurized Tap Rubber Ring CO 2 Releaser CO 2 Cartrid.
3 Installing the Mini kegerator Installation Carefully unpack all parts. Place the unit on a flat and level su rface. It will work best in a room temperature environment (70°F), away from t he sun and other heat sources, and with 3” of clearance between all sides of the unit and other objects for ventilation.
EdgeStar Mini Kegerator 4 General instructions Regardless of the brand of 5-liter mini keg, her e are the basic steps for tapping it: 1. Chill your keg- although this mini kegerator has a cooling plat.
5 Heineken brand DraughtKeg tapping instructions Heineken brand DraughtKeg™ mini kegs have an internal CO 2 tank. This is the only type of mini keg that you can tap without the optional accessory kit. 1. Chill the mini keg 2. Open the door of the mini kegerator.
EdgeStar Mini Kegerator 6 Non-pressurized Accessory Kit Part Descriptions The following section describes the parts of the optional TBC50-ACC Accessory Kit (sold separately) and their purposes. 1. Non-Pressurized Tap - Using a piercing tube, this tap is to be inserted into a non-pressurized keg.
7 Non-pressurized Mini Ke g Tapping Instructions Note that the following instructions refer to optional accesso ry kit (sold separately). Visit kegerator.
EdgeStar Mini Kegerator 8 Tapping the different types of non-pressurized kegs: There are several different types of non-pressurized 5 Liter kegs available. The mini kegs mainly di ffer in the type of “bung” (plug) sealing the top of the mini keg. It is into this bung that the mini kegs are tapped.
9 Connecting the CO 2 : Open the compartment located on the right-ha nd si de of the mini kegerator. Make sure that the pressu re gauge va lve is closed (to close the valve, turn it counter-clockwise ). Attach the pressure gauge on the end piece of the 16g adapter.
EdgeStar Mini Kegerator 10 Removing the CO 2 line and mini keg Once your mini keg is consumed, you need to shut off the CO 2 and remove the keg. Open the compartment located on the right-hand side of the mini kegerator. Shut off the regulator (turn the knob counter-clockwise).
11 Tips for Best Results 1. For best results, use clean glasses. Rinsing the glasses with cold water prior to pouring can deliver better results (less foam). 2. Hold the glass at an angle under the dispenser. Do not touch the nozzle of the dispenser to the glass.
EdgeStar Mini Kegerator 12 Important Safeguards Do not use the appliance if the power supply cord is damaged. If the power supply cord is damaged, it must be replaced by a qualified technician. This unit is designed to function on 115 Volts/ 60 Hz (110/115/120 Volts acceptable) electrical circuits.
13 Adjusting the Temperature This mini kegerator has a temperature range from 38°F to 54°F. Press the button on the control panel to lower the temperature by 1 degree increments. Allow at least 24 hours before storing your keg and to allow the temperature to acclimate.
EdgeStar Mini Kegerator 14 Specifications Description of product Mini Kegerator & 5L Draft Beer Dispenser Model TBC50S Voltage/Frequency AC 115V~60Hz Amperage 0.
15 EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Da ys Labor This product is warranted by EdgeStar to be free from defecti ve workmanship and materials, subject to any condition s set.
EdgeStar Products Box 81336 Austin, TX 78708-1336 Toll Free: 1-866-319-5473 Web: http://www.edgestar.com E-mail: service@edgestar.com Register your product, download own er’s manuals, access additional troubleshooting resources, and obta in more information on other great EdgeStar products on the web at: http://www.
An important point after buying a device EdgeStar TBC50S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EdgeStar TBC50S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EdgeStar TBC50S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EdgeStar TBC50S you will learn all the available features of the product, as well as information on its operation. The information that you get EdgeStar TBC50S will certainly help you make a decision on the purchase.
If you already are a holder of EdgeStar TBC50S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EdgeStar TBC50S.
However, one of the most important roles played by the user manual is to help in solving problems with EdgeStar TBC50S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EdgeStar TBC50S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
