Instruction/ maintenance manual of the product THUNDER SERIES AVS 1803 Edelbrock
Go to page of 6
©2008 Edelbrock Corporation Brochure #63-0170, Rev . 1/08 - AJ/mc Catalog #1801-1806,1812, 1813, 1825, 1826 Thunder Series AVS Carburetors Page 1 of 6 PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and procedures.
©2008 Edelbrock Corporation Brochure #63-0170, Rev . 1/08 - AJ/mc Catalog #1801-1806,1812, 1813, 1825, 1826 Thunder Series AVS Carburetors Page 2 of 6 POWER BRAKE PORT (Rear of Carburetor - 1/4” NP.
6. Do not use more than 6.5 psi fuel pressure . Excessive fuel pressure may cause flooding. If your fuel pressure is too high, install an adjustable pressure regulator such as Edelbrock #8190, or #1727. 7. It may be necessary to re-route the fuel line to prevent interference with the air cleaner .
2. Check and prepare carburetor for proper vacuum fitting installation (EGR, power brakes, PCV , distributor , transmission, etc.) using supplied vacuum caps, “T”, and hose when a pplicable. If vacuum port at rear of carb is not used, plug with the 1/4" pipe plug supplied .
6. Connect all vacuum hoses to their proper location on carburetor (See Fig . 1) . Replace hoses that appear brittle or cracked to prevent vacuum leaks. 7. Connect fuel line to carburetor . Avoid contact with an y sharp edges or areas of extreme heat.
©2008 Edelbrock Corporation Brochure #63-0170, Rev . 1/08 - AJ/mc Catalog #1801-1806,1812, 1813, 1825, 1826 Thunder Series AVS Carburetors Page 6 of 6 Edelbrock Corporation • 2700 California St. • T orrance , CA 90503 T ech-Line: 800-416-8628 • E-Mail: Edelbrock@Edelbrock.
An important point after buying a device Edelbrock THUNDER SERIES AVS 1803 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock THUNDER SERIES AVS 1803 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock THUNDER SERIES AVS 1803 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock THUNDER SERIES AVS 1803 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock THUNDER SERIES AVS 1803 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock THUNDER SERIES AVS 1803, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock THUNDER SERIES AVS 1803.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock THUNDER SERIES AVS 1803. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock THUNDER SERIES AVS 1803 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
