Instruction/ maintenance manual of the product Performer 4754 Edelbrock
Go to page of 4
Catalog #4754 Rev . 10/06 - RS/mc Page 1 of 4 ©2006 Edelbrock Corporation Brochure #63-0255 When loosening or tightening the banjo bolt on the fuel filter can, use a 19mm wrench on the hex of the fuel filter can to counteract the torque of loosening or tightening the banjo bolt.
Catalog #4754 Rev . 10/06 - RS/mc Page 2 of 4 ©2006 Edelbrock Corporation Brochure #63-0255 Install the vacuum fittings into the top of the Performer X intake manifold (See Fig . 2-B) . Install the water outlet fitting into the mounting flange and install the 1/8” NPT x 8mm barb into the wa ter outlet fitting (See Fig .
PERFORMER X INT AKE MANIFOLD INST ALLA TION 1. T rim the upper edge of the supplied intake manifold gasket (See Fig . 4) . 2. Using the supplied gasket, install the P erformer X manifold/throttle body/fuel rail assembly onto the engine. T orque all bolts to 17 ft.
Catalog #4754 Rev . 10/06 - RS/mc Page 4 of 4 ©2006 Edelbrock Corporation Brochure #63-0255 Edelbrock Corporation • 2700 California St. • T orrance , CA 90503 T ech-Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.
An important point after buying a device Edelbrock Performer 4754 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock Performer 4754 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock Performer 4754 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock Performer 4754 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock Performer 4754 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock Performer 4754, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock Performer 4754.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock Performer 4754. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock Performer 4754 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
