Instruction/ maintenance manual of the product Performer 1602 Edelbrock
Go to page of 6
©2006 Edelbrock Corporation Brochure #63-1602 Page 1 of 6 Catalog #1602, 1615 Rev . 4/06 - RS/mc PERFORMER™ CYLINDER HEADS For 1984 & Later Harley-Davidson ® Evolution ® “Big T win” Engines Catalog #s 1602 & 1615 INST ALLA TION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation.
©2006 Edelbrock Corporation Brochure #63-1602 Page 2 of 6 Catalog #1602, 1615 Rev . 4/06 - RS/mc 1. Before installing heads on engine, remove valve springs, retainers and locks from one head. Leave the valve seals on to hold the valves in position during the clearance check.
©2006 Edelbrock Corporation Brochure #63-1602 Page 3 of 6 Catalog #1602, 1615 Rev . 4/06 - RS/mc REMOVE ROCKER ARM COVERS 1. Remove bolts (1) and seals (2) (See Figure 1) . Use a shortened 3/16" allen wrench. 2. Remove top (3) and middle (4) sections of rocker box.
©2006 Edelbrock Corporation Brochure #63-1602 Page 4 of 6 Catalog #1602, 1615 Rev . 4/06 - RS/mc CYLINDER HEAD INST ALLA TION CAUTION Install new O-rings over the cylinder dowels before installing the head gasket. Install the O-rings first to ensure alignment of the head gasket and prevent gasket leaks.
©2006 Edelbrock Corporation Brochure #63-1602 Page 5 of 6 Catalog #1602, 1615 Rev . 4/06 - RS/mc PUSH ROD INST ALLA TION NOTE: There is one length push rod for each of four locations (See Figure 10) .
©2006 Edelbrock Corporation Brochure #63-1602 Page 6 of 6 Catalog #1602, 1615 Rev . 4/06 - RS/mc CAUTION Do not turn engine over until push rods spin freely .
An important point after buying a device Edelbrock Performer 1602 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock Performer 1602 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock Performer 1602 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock Performer 1602 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock Performer 1602 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock Performer 1602, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock Performer 1602.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock Performer 1602. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock Performer 1602 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
