Instruction/ maintenance manual of the product E-TEC 200 Edelbrock
Go to page of 4
Part #60959, 60969, 60979, 60989 Rev . 1/09 - AJ/mc Page 1 of 4 ©2009 Edelbrock Corporation Brochure #63-0155 E-TEC 170 AND E-TEC 200 ALUMINUM CYLINDER HEADS For Small Block Chevrolet Using V ortec S.
Part #60959, 60969, 60979, 60989 Rev . 1/09 - AJ/mc Page 2 of 4 ©2009 Edelbrock Corporation Brochure #63-0155 IMPORT ANT NOTES: READ BEFORE BEGINNING INST ALLA TION! For a successful installation, Edelbrock E-T ec 170/200 Cylinder Heads require some components other than original equipment parts.
Part #60959, 60969, 60979, 60989 Rev . 1/09 - AJ/mc Page 3 of 4 ©2009 Edelbrock Corporation Brochure #63-0155 INST ALLA TION PROCEDURE Figure 1 - SBC Cylinder Head Bolt T orque Sequence T orque Bolts to 65 ft./lbs. (T orque in 3 steps, gradually approaching final torque spec.
Part #60959, 60969, 60979, 60989 Rev . 1/09 - AJ/mc Page 4 of 4 ©2009 Edelbrock Corporation Brochure #63-0155 Head Bolt T orque: 65 ft-lbs (in steps of 40, 55, 65) Intake Bolt T orque: 11 ft./lbs. Rocker Stud T orque: 45 ft./lbs. (See Instructions) Deck Thickness: 5/8” Combustion Chamber Volume: 64cc Deck Surface Milling Every .
An important point after buying a device Edelbrock E-TEC 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock E-TEC 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock E-TEC 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock E-TEC 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock E-TEC 200 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock E-TEC 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock E-TEC 200.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock E-TEC 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock E-TEC 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
