Instruction/ maintenance manual of the product 72700 Edelbrock
Go to page of 4
1 PN 72700 12-Volt 10-lb./15-lb. Nitrous Bottle Heater Installation Instructions Features: Durable, Long-Lasting Heating Element Velcro ® Straps fo r Easy Installation Dual Thermostat Cartridges for Reliability All Electrical Hardware Included Please read these instru ctions care fully before you begin installation.
2 10. Connect terminal #1 from th e toggle switch to an “igni tion-switched” +12 volt source. We recommend that you connect this wire to the swit ched-on power of the vehicle’s nitrous system arming switch. This ensures that the heater ca n only be activated when the nitrous system is armed.
3 To Test Bottle Heater for Correct Operation: 1. Turn ignition key to the “run” position. 2. Turn the vehicle’s nitrous system to ggle switch to the “on” position.
4 Caution 1. The bottle heater surface can achieve temperatures in excess of 400 degrees. Do not attempt to handle, adjust, or remove from the bottl e while the heater is in operati on. 2. Do not touch heater surface while in op eratio n. Severe burns to the skin can result.
An important point after buying a device Edelbrock 72700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 72700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 72700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 72700 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 72700 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 72700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 72700.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 72700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 72700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
