Instruction/ maintenance manual of the product 7182 Edelbrock
Go to page of 4
©1998 Edelbrock Corp. Rev . 3/98 page 1 PERFORMER RPM Camshaft/Lifters/Lube Kit CA T ALOG #7182 MODEL: 351-W Ford V8 • PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesitate to call our T echnical Hotline at: 1-800-416-8628.
page 2 •INST ALLA TION INSTRUCTIONS 1. Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start- up. 2. Install new camshaft with new sprockets, timing chain and lifters.
page 3 • CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set #7820 or Accu-Drive gear drive #7892. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation.
CAMSHAFT : Performer RPM Hydraulic CA T ALOG: #7182 ENGINE: Ford 351-W V8 RPM RANGE: 1500-6500 CAUTION: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat V alve Springs #5722. Use stock ratio (1.6:1) rocker arms only . Duration at .
An important point after buying a device Edelbrock 7182 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 7182 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 7182 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 7182 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 7182 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 7182, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 7182.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 7182. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 7182 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
