Instruction/ maintenance manual of the product 7122 Edelbrock
Go to page of 4
PERFORMER RPM Camshaft/Lifters/Lube Kit CA T ALOG #7122 MODEL: 289-302 c.i.d. Ford V8 (not for Boss 302 or 1985 & later roller lifter engines) TO A V OID THESE PROBLEMS YOU MUST DO THE FOLLOWING: Carefully study and understand all instructions. Examine the camshaft for possible shipping damage (if damaged contact you dealer immediately).
8. Remove carburetor and intake manifold. Remove fuel pump. 9. Remove rocker arms and pushrods. CAUTION: If your engine has non-adjustable rocker arms (1969- 1/2 or later), you must install screw-in studs and high per- formance adjustable rocker arms.
• CAMSHAFT/LIFTER RUN-IN CAUTION: Change the engine oil and filter before start-up and again after the initial break-in. Do not allow the engine to run under 2000 rpm for the first 1/2 hour . V ary engine speed between 2000 and 3000 rpm. Slow idle speeds may result in severe cam and lifter wear .
CAMSHAFT : Performer RPM Hydraulic CA T ALOG #7122 ENGINE: Ford 289-302 c.i.d. V8 RPM RANGE: 1500-6500 CAUTION: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat V alve Springs #5722. Use stock ratio (1.6:1) rocker arms only . Duration at .
An important point after buying a device Edelbrock 7122 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 7122 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 7122 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 7122 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 7122 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 7122, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 7122.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 7122. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 7122 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
