Instruction/ maintenance manual of the product 6643 Edelbrock
Go to page of 2
Pro - Flo Header 1999 - 2000 Honda Civic Si Catalog PNs 6643, 6743, 4743 Please study these instructions carefully before installing your new Pro - Flo Header. They provide general guidelines to be stu died and understood before you remove your stock system.
© 2001 Edelbrock Corporation Rev. 5/01 PARTS LIST DISASSEMBLY (Continued) 5. Remove O2 sensor (if applicable) being careful not to destroy or rupture the unit. Warning: Do not clean this unit in any cleaning solvents and do not rupture wire . 6. Remove the two nuts from hanger bracket.
An important point after buying a device Edelbrock 6643 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 6643 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 6643 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 6643 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 6643 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 6643, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 6643.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 6643. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 6643 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
