Instruction/ maintenance manual of the product 5291 Edelbrock
Go to page of 3
©2002 Edelbrock Corporation Page 1 of 3 Rev. 1/02 EDELBROCK SUSPENSION Sub-Frame Connectors For 1994-2002 Mustang GT & 1999-2002 Mustang Cobra Catalog #5291 INSTALLATION INSTRUCTION Please study these instructions carefully before installing your new sub-frame connectors.
©2002 Edelbrock Corporation Page 2 of 3 Rev. 1/02 INSTALLATION INSTRUCTIONS 1. Place vehicle on a drive-on style of lift (preferred) or lift vehicle so as to keep the suspension loaded with the vehicle weight.
©2002 Edelbrock Corporation Page 3 of 3 Rev. 1/02 7. Begin welding by tack welding both the front then the rear of the subframe connector to the floor pan. Once it is securely tack welded in, then start to do the final welding. Weld the seat bracket to the subframe connectors securely.
An important point after buying a device Edelbrock 5291 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 5291 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 5291 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 5291 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 5291 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 5291, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 5291.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 5291. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 5291 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
