Instruction/ maintenance manual of the product 389-455 Edelbrock
Go to page of 4
INSTRUCTIONS FOR ENGINE P AR TS REMOV AL BEFORE CAMSHAFT INST ALLA TION 1. Disconnect battery . 2. For ease of installation, keep all parts in some sort of order . ©1998 Edelbrock Corp Rev 5/98 • PLEASE study these instructions carefully before installing your new camshaft.
W ARNING: Do not remove radiator cap or radiator hose if engine is hot. 3. Drain radiator coolant, move fan shroud back and remove fan and spacer from water pump. On air conditioned vehicles, remove bolt, lower idler pulley and compressor-to- water pump mount.
Figure 1- Pontiac 389-455 c.i.d. V8 Firing Order 1-8-4-3-6-5-7-2 T urn distributor clockwise to advance timing. • PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space. • THANK YOU.
• CAMSHAFT : Performer RPM • CA T ALOG #7157 • ENGINE: Pontiac 389-455 c.i.d. V8 • RPM RANGE: 1500-6500 • CAUTION: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat V alve Springs #5757. Use stock ratio rocker arms only .
An important point after buying a device Edelbrock 389-455 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 389-455 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 389-455 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 389-455 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 389-455 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 389-455, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 389-455.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 389-455. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 389-455 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
