Instruction/ maintenance manual of the product 3722 Edelbrock
Go to page of 5
® Performer-Plus 5.0L Hydraulic Roller Lifter Camshaft only CA T ALOG #3722 MODEL: 5.0 Litre Ford V8, 1985 & later INSTRUCTIONS • PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesitate to call our Technical Hotline at: 1-800-416-8628.
INSTRUCTIONS FOR ENGINE PARTS REMOVAL • BEFORE CAMSHAFT INSTALLATION • For ease of installation, keep all parts in some sort of order. WARNING: Do not remove radiator cap or radiator hose if engine is hot. 1. Disconnect negative battery cable and drain cooling system.
4. Replace valve covers, carburetor linkage and remaining vacuum and electrical connections. 5. Re-install air conditioner, if so equipped. 6. Refill radiator with coolant and re-connect battery. 7. Double check all connections, fuel lines, etc. before starting engine.
page 4 CAUTION: Fuel system is under pressure. Pressure must be released before servicing fuel system components. 1. Remove fuel cap to release fuel tank pressure. Using EFI pressure gauge (T80L-9974-B), release fuel pressure from fuel pressure relief on fuel rail.
• CAMSHAFT: Performer-Plus 5.0L • CATALOG #3722 • ENGINE: Ford 5.0L V8, 1985 & later • RPM RANGE: idle-6000 • CAUTION: Use only recommended stock or Edelbrock Sure Seat Valve Springs #5822 or #5922 (for rotators). Duration at .004" Lift: Intake 282° Exhaust 282° Duration at .
An important point after buying a device Edelbrock 3722 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 3722 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 3722 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 3722 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 3722 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 3722, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 3722.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 3722. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 3722 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
