Instruction/ maintenance manual of the product 352-428 Edelbrock
Go to page of 4
• TOOLS AND EQUIPMENT— Use the following checklist for items needed. 1. Disconnect battery . 2. For ease of installation, keep all parts in some sort of order . W ARNING : Do not remove radiator cap or radiator hose if engine is hot. 3. Drain radiator coolant, move fan shroud back and remove fan and spacer from water pump.
• V AL VESPRINGS CAUTION: W ARNINGS ABOUT YOUR W ARRANTY In order for this Performer RPM cam and lifter kit to be covered under ANY W ARRANTY you MUST use the correct Edelbrock Sure Seat V alve Springs.
T iming Marks Figure 1 T iming Chain Spr ocket Alignment Figure 2 Firing Or der 1-5-4-2-6-3-7-8 352-428 c.i.d. For d V8 T urn distributor clockwise to advance timing.
CAMSHAFT : Performer RPM Hydraulic CA T ALOG #7106 ENGINE: Ford 352-428 c.i.d. V8 (1963-1/2 and later) RPM RANGE: 1500-6500 CAUTION: Do not use dual valve springs.Use only recom- mended Edelbrock Sure Seat V alve Springs #5767. Use stock ratio rocker arms only (1.
An important point after buying a device Edelbrock 352-428 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 352-428 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 352-428 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 352-428 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 352-428 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 352-428, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 352-428.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 352-428. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 352-428 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
