Instruction/ maintenance manual of the product 33505 Edelbrock
Go to page of 7
INSTALLATION INSTRUCTIONS FOR 1996 - 2001 VIPER SHOCKS Catalog #33505 § Please read these instructions entirely before beginning . Proper installation is a must to realize the maximum performance improvements. I MPORTANT NOTES: § Upon initial inspection, some new shocks may have a small amount of oil in the area of the seal.
Step 4 Removal of rear shock Step 6 D isassembly of rear coil springs from shock 4(a) Loosen upper and lower nuts. 4(b) In order to remove bolts, they may need a little gentle persuasion with a pry bar. Bolt should come out by hand (see Fig. 3). 4(c) Shock will now come out through the top.
Step 8 Assembly of Front shocks 8(a) Insert coil spring with flat ground end against threaded collar seat . 7(b) Install and tighten allen set screw with 1/8 allen wrench (see Fig. 8). Fig. 8 8(b) Put shock and coil spring in spring compressor (see Fig.
Step 9 Rear IAS shocks IAS shock reuses the O.E.M. large black clevis mount and must be unscrewed from the shock body. 9(a) Mount clevis in vice with soft jaws, al uminum preferred as not to mark up the clevis. Screw jamb nut by hand until it hard stops at end of threads (see Fig.
9(g) Clamp supplied spa nner wrench (see Fig. 16) in vise (see Fig. 18) to support threaded adapter torque nut to 75 ft lbs. with 7/8 socket. Fig. 18 9(i) Assemble shock by screwing the adapter with Loctite applied into clevis (see Fig. 20), Fig. 20 screw the adapter in cl evis until it bottoms (see Fig.
Step 10 Installing IAS shocks Reinstallation is reverse of removal. 10(a) Both front and rear may require a little gentle persuasion with a long pry bar to push cont rol arms down in order to install bolts (see Fig. 22 and Fig. 22a). Do not torque nuts at this time.
INSTALLATION INSTRUCTION PROOFING FORM Date: 2/20/01 From: Gary Nelson To: Jack Mayberry Part No./ Description: PN 33505 – Shocks for 1996 - 2001 Viper Reviewed by: Date Reviewed by: Date Reviewed by: Date Approved by: Date No.
An important point after buying a device Edelbrock 33505 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 33505 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 33505 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 33505 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 33505 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 33505, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 33505.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 33505. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 33505 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
