Instruction/ maintenance manual of the product 33503 Edelbrock
Go to page of 4
INSTALLATION INSTRUCTIONS FOR 1992 - 1995 VIPER SHOCKS Catalog #33503 § Please read these instructions entirely before beginning . Proper installation is a must to realize the maximum performance improvements. IM PORTANT NOTES: § Upon initial inspection, some new shocks may have a small amount of oil in the area of the seal.
Step 4 Removal of rear shock Step 7 Assembl y of IAS shocks 4(a) Loosen upper and lower nuts. 4(b) In order to remove bolts, they may need a little gentle persuasion with a pry bar. Bolt should come out by hand. (See Fig. 3). 4(c) Shock will now come out through the top.
8(e) Align end of coil spring to lowest point on spring seat before releasing the spring compressor. (See Fig. 11). Fig 11 Step 9 Assembly of Rear IAS shocks 9(a) Rear rod end uses the long threads. The procedure of assembly is the same as the front. (See Fig.
10(b) Front sway bar end links may now be reinstalled. Install both left and right at the same time. After both sides are in position, the end link to control arm nuts can now be torqued to 16 ft.
An important point after buying a device Edelbrock 33503 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 33503 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 33503 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 33503 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 33503 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 33503, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 33503.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 33503. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 33503 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
