Instruction/ maintenance manual of the product 2167 Edelbrock
Go to page of 4
HARDWARE & P ARTS TO BUY • PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesitate to call our T echnical Hotline at: 1-800-416-8628. • CAMSHAFT : Edelbrock Performer -Plus camshafts are ground specifically for use with the corresponding Performer manifold.
• V AL VE SPRINGS CAUTION: WARNINGS ABOUT YOUR WARRANTY In order for this Performer -Plus cam and lifter kit to be covered under ANY W ARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or original equipment springs.
• CAM GEARS AND CAMSHAFT END PLA Y - If cam gear becomes loose, the cam will slide back in the block, causing the lifters to hit the lobes next to them and also the cam bearing journals. If the engine is run after this happens, the bottom of the lifters and the sides of the lobes will become clipped.
CAMSHAFT : P erformer-Plus Hydraulic CA T ALOG #2167 ENGINE: Ford 429/460 c.i.d. V8 RPM RANGE: Idle-5500 CAUTION: Do not use dual valve springs. Use only recommended stock or Edelbrock Sure Seat Valve Springs #5867 Use stock ratio rocker arms only . Duration at .
An important point after buying a device Edelbrock 2167 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 2167 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 2167 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 2167 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 2167 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 2167, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 2167.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 2167. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 2167 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
