Instruction/ maintenance manual of the product 2157 Edelbrock
Go to page of 5
PERFORMER-PLUS Camshaft/Lifters/Lube Kit CA T ALOG #2157 MODEL: 350-455 c.i.d. Pontiac V8, 1965 & later ©2008 Edelbrock Corp Brochure #63-2157 Rev .
• V AL VE SPRINGS CAUTION: WARNINGS ABOUT YOUR WARRANTY In order for this Performer -Plus cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Se at V alve Springs or equivalent.
• INST ALLING DISTRIBUTOR AND TIMING ENGINE NOTE: Before installing your distributor , check the gear drive on the distributor and oil pump for any signs of wear .
TIMING MARKS • WARNING In order for this Performer -Plus cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Se at V alve Springs. The end fla p or label from your Sure Seat Valve Spring box must be sent in with your camshaft warranty card.
• CAMSHAFT : Performer -Plus Hydraulic • CA T ALOG #2157 • ENGINE: Pontiac 350-455 c.i.d. V8 • RPM RANGE: idle-5500 • CAUTION: Do not use high pressure valve springs. Use only recommended Edelbrock Sure Seat Valve Springs #5857 (non-rotators).
An important point after buying a device Edelbrock 2157 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 2157 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 2157 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 2157 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 2157 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 2157, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 2157.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 2157. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 2157 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
