Instruction/ maintenance manual of the product 2132 Edelbrock
Go to page of 4
PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT CA T ALOG # 2132 MODEL: 304-360-401 c.i.d. AMC V8 engines GENERAL INSTRUCTIONS • Please study these instructions carefully before you remove your stock camshaft. If you have any questions or problems, do not hesitate to con- tact our T echnical Hotline at: 1-800-416-8628.
13. Remove crankshaft pulley , and using a suitable puller , crankshaft dampener . 14. Remove two front oil pan bolts. Remove bolts securing timing chain cover to block. NOTE: Bolts vary in length and must be installed in same location as removed. Pull cover forward until free of locating dowel pins.
Firing Order: 1-8-4-3-6-5-7-2 Figure 1 304-401 c.i.d AMC V8 Firing Order and Timing Marks T urn distributor counter c lockwise to advance timing 3. Lightly tighten the hold-down clamp so that the distributor can still be turned to determine final setting using a timing light with the engine running.
CAMSHAFT : P erformer -Plus CA T ALOG #2132 ENGINE: 304-401 c.i.d. AMC V8 RPM RANGE: 1500-5500 CAUTION: Use only Sure Seat Valve Springs, #5832 or 5932 Use stock ratio rocker arms only Duration at 0.006" Lift: Intake: 278° Exhaust: 288° Duration at 0.
An important point after buying a device Edelbrock 2132 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 2132 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 2132 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 2132 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 2132 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 2132, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 2132.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 2132. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 2132 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
