Instruction/ maintenance manual of the product 2103 Edelbrock
Go to page of 4
PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT CA T ALOG # 2103 MODEL: 400 c.i.d. Chevrolet V8 engines GENERAL INSTRUCTIONS • Please study these instructions carefully before you remove your stock camshaft. If you have any questions or problems, do not h esitate to contact our T echnical Hotline at: 1-800-416-8628.
15. Remove fuel pump and fuel pump pushrod. Rota te engine until timing marks are aligned as in Figure 1. 16. Remove bolts retaining camshaft sprocket.
Figure 2— Timing Chain Sprocket Alignment Timing Marks Firing Order: 1-8-4-3-6-5-7-2 Figure 1 400 c.i.d Chevrolet V8 Firing Order and Timing Marks T urn distributor counter clockwise to advance timi.
CAMSHAFT : Performer -Plus CA T ALOG #2103 ENGINE: 400 c.i.d. Chevrolet V8, 1970 & later RPM RANGE: idle-5500 CAUTION: Use only Sure Seat Valve Springs, #5802 or 5902 Use stock ratio rocker arms only Duration at 0.006" Lift: Intake 288° Exhaust 288° Duration at 0.
An important point after buying a device Edelbrock 2103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 2103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 2103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 2103 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 2103 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 2103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 2103.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 2103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 2103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
