Instruction/ maintenance manual of the product 1967 Edelbrock
Go to page of 5
PERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7177 MODEL: 340-360 c.i.d. Chrysler V8, 1967 & 1985 ©1998 Edelbrock Corp Rev 9/98 • PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesi- tate to call our Technical Hotline at: 1-800-416-8628.
INSTRUCTIONS FOR ENGINE PARTS REMOVAL • BEFORE CAMSHAFT INSTALLATION 1. Disconnect battery. 2. For ease of installation, keep all parts in some sort of order. WARNING: Do not remove radiator cap or radiator hose if engine is hot. 3. Drain radiator coolant, move fan shroud back and remove fan and spacer from water pump.
terminal in the cap, and with the vacuum advance canister in its original position. 3. Lightly tighten the hold-down clamp so that the distributor can still be turned to determine final setting using a timing light with the engine running. 4. Replace valve covers, carburetor linkage and remaining vacuum and electrical connections.
• CAUTION: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7803. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not rec- ommended for this camshaft installation.
CAMSHAFT: Performer RPM Hydraulic CATALOG #7177 ENGINE: Chrysler 340-360 c.i.d. V8 RPM RANGE: 1500-6500 CAUTION: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat Valve Springs #5777. Use stock ratio rocker arms only. Duration at .
An important point after buying a device Edelbrock 1967 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 1967 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 1967 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 1967 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 1967 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 1967, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 1967.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 1967. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 1967 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
