Instruction/ maintenance manual of the product 17930 Edelbrock
Go to page of 4
Catalog #17930 Brochure #63-0220 Page 1 of 4 ©2003 Edelbrock Corporation Rev. 11/03 155 Liter/Hr, In Tank Fuel Pump For 1985-1997 Ford Mustang (Except for 1996-1997 Cobra) Catalog # 17930 INSTALLATIO.
Catalog #17930 Brochure #63-0220 Page 2 of 4 ©2003 Edelbrock Corporation Rev. 11/03 (Note: This rotary fuel injection pump will not work on carbureted fuel systems. It is for electronic fuel injection only.) (Note: The word “bracket” used throughout these instructions refers to the fuel pump mounting bracket and fuel level sender assembly.
Catalog #17930 Brochure #63-0220 Page 3 of 4 ©2003 Edelbrock Corporation Rev. 11/03 BRACKET REMOVAL 1. Thoroughly clean all dirt and debris from the top of the tank. Clean out any dirt from around the locking ring and retainer. This must be done to prevent dirt of foreign material from falling into the fuel tank while removing the bracket.
Catalog #17930 Brochure #63-0220 Page 4 of 4 ©2003 Edelbrock Corporation Rev. 11/03 FUEL TANK INSTALLATION 1. Inspect the condition and location of all tank mounting pads, insulators and brackets. Defective, missing or mislocated pads and insulators will cause the transmission of excessive noise into the vehicle.
An important point after buying a device Edelbrock 17930 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edelbrock 17930 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edelbrock 17930 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edelbrock 17930 you will learn all the available features of the product, as well as information on its operation. The information that you get Edelbrock 17930 will certainly help you make a decision on the purchase.
If you already are a holder of Edelbrock 17930, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edelbrock 17930.
However, one of the most important roles played by the user manual is to help in solving problems with Edelbrock 17930. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edelbrock 17930 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
