Instruction/ maintenance manual of the product CD8061 Eclipse - Fujitsu Ten
Go to page of 108
OWNER'S MANUAL We appreciate your purchase of this tuner. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
2 For your safety in using the CD8061 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD8061. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. • To prevent accidents, store batteries for the remote control out of the reach of small children.
4 • To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result. • When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems.
5 • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident. • Keep foreign objects out of the disc slot. They may cause fire or electrical shock.
6 • Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting, resulting in smoke or fire.
7 T able of Contents Operating precautions .............................................. 10 Notes on operation ...................................................................... 10 About compact discs .............................................
8 How to operate the tuner .......................................... 46 Tuning to a station ....................................................................... 46 Entering stations into memory automatically (The automatic preset mode: ASM) ......
9 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected ... 77 How to operate the DSP functions .............................................. 77 How to operate the EQ functions .................................
Operating precautions <Your CD8061 will perform well over a long period of time through correct handling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard. •U se only audio compact discs. This player can only play compact discs bearing the logo shown to the left.
• About dew condensation. In cold or rainy weather, just as the interior glass surface gets fogged, dew (water condensation) may also settle on the deck. When this occurs, disc playback may become intermittent or impossible. Dehumidify the air in the vehicle for a while before resuming playback.
Operating precautions 12 • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback.
13 Operating precautions About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “improving sound performance” or “protecting CDs.” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player.
Operating precautions 14 About borrowed CDs • Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get stuck inside or damage the deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot.
15 Operating precautions • Use a commercially available compact disc cleaner to clean a CD, wiping lightly from the center to the edge. • Do not use benzine, thinner, LP record spray or other cleaners on CDs.
Names of controls and parts 16 16 16 Names of controls and parts Fr ont view ※ NOTE : Double function button "E-COM" & "MUTE" functions Though the words "press&q.
17 ESN (Key CD) security operating procedure [FUNC] button Button [1] ESN (Key CD) security operating procedure How to pr ogram the Key CD 1 . Check that the Power is OFF. 2 . Press and hold button [1], then the [FUNC] button, and hold both for more than one second.
[FUNC] button Button [1] ESN (Key CD) security operating procedure 18 • If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsert the ejected CD. • If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds.
19 ESN (Key CD) security operating procedure • This process cancels the protection for the ESN deck. • If power to the ESN deck is disconnected, then reconnected, a Key CD will not need to be inserted in order to return the unit to normal operation.
ESN (Key CD) security operating procedure 20 How to r esume normal operation (ESN security lock out) If power is disconnected while ESN security is active (a Key CD was programmed), operation is disabled until power is restored and the unit unlocked.
21 ESN (Key CD) security operating procedure What happens if an incorr ect CD is inserted? 1 . An [ERR] message will be appear, then change to a flashing [DISC], then the CD will be ejected. You will have five uninterrupted attempts to insert the correct CD.
ESN (Key CD) security operating procedure 22 How to tur n the security indicator on/of f Once PIN or ESN security is activated, the indicator flashes whenever the vehicle’s ignition is turned off, warning potential thieves that the unit is protected.
23 ESN (Key CD) security operating procedure 23 How to read the Electr onic Serial Number 1 . Turn OFF the Power. 2 . Press button [4], then the [FUNC] button, and hold both for more than one second. [ESN] appears on the display, followed by an eight-digit number; this number is your electronic serial number (ESN).
Basic operation 24 Buttons [1] to [6] [OPEN] button [ BND ] button [ TU ] button [SOURCE] button Basic operation This section covers basic operating procedures.
25 Basic operation When a CD is already loaded, press the [SOURCE] button repeatedly to switch to the CD mode. Listening to the tuner 1 . Press and hold the [SOURCE] button until the mode switches to the tuner mode.
Basic operation 26 [MODE] button [CUST OM] button [A UDIO CONTROL] button [FUNC] button [E-COM] button [ BND ] button [SOURCE] button Button [6] 26 26 26 Adjusting audio volume 1 . Turn the [AUDIO CONTROL] button to the left or right. Turn to the left : Decreases the volume.
27 Basic operation 3 . Press the [SOURCE] button to switch to [CLOCK ON]. 4 . Press the [FUNC] button again. • If the spectrum analyzer display is set to ON, priority is given to the spectrum analyzer display (See Page 35). •P ressing button [6] during power-off switches ON/OFF of the clock display during power-off.
Basic operation 28 [A UDIO CONTROL] button Buttons [1] to [5] [E-COM] button [OPEN] button Switching audio control modes Various audio control modes may be fine-tuned using this procedure. 1. Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted.
29 Basic operation Enabling the loudness control The loudness control may be turned on to emphasize low and high frequencies at low volume levels. Loudness compensates for the apparent weakness of low and high frequencies at low volume by boosting the bass and treble levels.
Basic operation 30 [MODE] button [ BND ] button [ TU ] button Buttons [1] to [5] Setting a memo 1. Press and hold any number button for more than two seconds while the power is turned off. The state shifts to the MEMO setting mode. 2 . Press button [1] to select the character type.
31 Basic operation 4 . Press either button [ BND ] to select characters. [BND ] button: Advances the character forward in its type. [BND ] button: Moves the character backward in its type. • To change the type of character to be entered, repeat steps 2 and 3.
Basic operation 32 [FUNC] button [ BND ] button [SOURCE] button Switching Non-Fader modes 1. Press the [FUNC] button. 2. Press the [ BND ] button repeatedly until [PHASE] appears on the screen. 3. Press the [SOURCE] button to switch NORMAL /REVERSE.
33 Basic operation Disabling the display 1. Press the [FUNC] button. 2. Press the [ BND ] button. Press the button repeatedly until [DISPLAY] appears on the screen. 3. Press the [SOURCE] button to switch ON/OFF of DISPLAY. 4. Press the [FUNC] button again.
Basic operation 34 [FUNC] button [ BND ] button [SOURCE] button Disabling the Cross Over (F .R) function Here, the HPF (high-pass filter) to the front and rear pre- outs can be switched ON and OFF.
35 Basic operation Switching the spectrum analyzer display 1. Press the [FUNC] button. 2. Press the [ BND ] button until [SA] appears on the screen. 3. Switch ON/OFF by pressing the [SOURCE] button. 4. Press the [FUNC] button to cancel the function mode so that the settings are enabled.
How to operate the CD player 36 [ BND ] button [SOURCE] button How to operate the CD player First press the [SOURCE] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. Listening to CDs 1 . Press the [SOURCE] button.
37 How to operate the CD player [ TU ] button Button [4] Advancing to the next track or r etur ning to the beginning of the track being played 1 . Press the [ TU ] button. [TU ] button: Advances to the next track. [TU ] button: Returns to the beginning of the track being played.
How to operate the CD player 38 Buttons [5] and [6] Button [3] Repeating the same track (REPEA T) 1 . Press button [5 (RPT)] to repeat the track being played. To cancel, press button [5] again. Playing tracks in random order (RANDOM) 1 . Press button [6 (RAND)] to play the tracks in random order.
39 How to operate the CD player [OPEN] button Ejecting the disc 1 . Press the [OPEN] button for less than two seconds. The front panel opens fully and ejects the disc. 2 . Remove the disc and press the [OPEN] button. The front panel returns to the angle before the disc ejection.
How to operate the CD player 40 [MODE] button [FUNC] button [ TU ] button Button [1] Creating a title for a CD A CD title may be created, attached and displayed for your discs. If external CD changers are connected, a title for a CD will be created in the same way.
41 How to operate the CD player [MODE] button [ BND ] button 5 . Press either [ BND ] button to select characters. [BND ] button: Advances the character forward in its type. [BND ] button: Moves the character backward in its type. • To change the type of character to be entered, repeat steps 2 and 3.
How to operate the CD player 42 [MODE] button [FUNC] button [ BND ] button [ TU ] button Changing a pr eviously set title If external CD changers are connected, a previously set title for a CD will be changed in the same way. It is assumed here that the disc mode is selected.
43 How to operate the CD player [MODE] button [FUNC] button 5 . Press the [MODE] button. The CD title entry process is now completed. Deleting a pr eviously created title If external CD changers are connected, a previously created title for a CD will be deleted in the same way.
How to operate the CD player 44 [CUST OM] button Changing the number of CD titles The number of CD titles that can be set can be changed by changing the memory allocation. The number of CD titles is fixed for each pattern and the number of tuner bands that can be recorded is also changed at the same time.
45 How to operate the CD player [MODE] button Displaying CD text Only the built-in CD player is supported. It cannot be displayed with the optional CD changer. If a CD has a logo shown below, it is recorded a Disc title and track titles, and they can be displayed.
How to operate the tuner 46 [ BND ] button [SOURCE] button How to operate the tuner First, press the [SOURCE] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.
47 How to operate the tuner [ BND ] button [ TU ] button 2 . Press the [ TU ] button to tune to a station. Tap the [ TU ] button for less than one second to tune to a station manually. To start searching for a station automatically, hold the button down for more than one second.
How to operate the tuner 48 [ BND ] button [ TU ] button [MODE] button Buttons [1] to [6] 2 . Press the [MODE] button for more than two seconds until a beep is heard. The automatic preset mode starts. The [ASM] indicator on the screen flashes, and stations are automatically entered in memory under buttons [1] to [6].
49 How to operate the tuner [MODE] button Buttons [1] to [6] 3 . Select any button, from [1] to [6], and press it for more than two seconds. The tuned station is now memorized and set in the button selected. Repeat the procedure to set additional manually tuned stations in memory, in turn, for buttons [1] to [6].
How to operate the tuner 50 [MODE] button [FUNC] button [ TU ] button Button [1] Setting a station name Station name settings can be changed. 1 . Press the [FUNC] button in the tuner mode. 2 . Press the [MODE] button for less than one second. 3 . Press button [1] to select the character type.
51 How to operate the tuner [MODE] button [ BND ] button 5 . Press either [ BND ] button to select characters. [BND ] button: Advances the character forward in its type. [BND ] button: Moves the character backward in its type. •To change the type of character to be entered, repeat steps 2 and 3.
How to operate the tuner 52 [MODE] button [FUNC] button Deleting a station name 1 . Press the [FUNC] button while in the Tuner mode. 2 . Press the [MODE] button. The station name that is displayed at this point will be deleted. 3 . Hold the [MODE] button down for more than two seconds.
53 How to operate the tuner [MODE] button [FUNC] button [ TU ] button Button [1] Setting a band category Band category settings can be changed. 1 . Press the [FUNC] button in the tuner mode. 2 . Press the [MODE] button for more than one second. 3 .
How to operate the tuner 54 [MODE] button [ BND ] button 5 . Press either [ BND ] button to select characters. [BND ] button: Advances the character forward in its type. [BND ] button: Moves the character backward in its type. •To change the type of character to be entered, repeat steps 2 and 3.
55 How to operate the tuner [MODE] button [FUNC] button Deleting a band category 1 . Press the [FUNC] button while in the Tuner mode. 2 . Press the [MODE] button for more than one second. The category that is displayed at this point will be deleted.
How to operate the tuner 56 [CUST OM] button Changing the number of bands The number of bands can be changed by changing the memory allocations. The number of bands is fixed for each pattern and the number of CD titles that can be set is also changed at the same time.
57 How to operate the tuner 57 FM r eception characteristics In general, FM has much better tonal quality than AM. However, FM and FM stereo reception encounter several characteristic problems not encountered with AM. FM is more difficult to receive than AM in a moving vehicle.
How to operate the tuner 58 58 3 . RECEPTION AREA OF FM BROADCASTS A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna.
59 How to operate the tuner 59 4 . MULTIPATH The reflection characteristics of FM waves cause another problem called multipath–FM wave signals reflecting off of buildings, mountains, etc.
How to use the NOB remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction. • Keep the remote control free of moisture, dust and water.
61 How to use the NOB remote control Tu r ning the power on/off When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. 1 . Press the [PWR] button. The power turns on or off each time the button is pressed.
How to use the NOB remote control 62 Switching playback modes 1 . Press the [MODE] button. Tap the button to switch modes in the following sequence: How to play the tuner Select the tuner mode first. Selecting the FM/AM band 1. Tap the [BAND] button.
63 How to use the NOB remote control Selecting a station (manually or automatically) A short tap of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. 1. Press the [ TUNE•SEEK ] button. [] button: Tunes to higher frequency stations.
How to use the NOB remote control discs loaded. Advancing to the next track or returning to the beginning of the track being played 1. Press the [ TRACK ] button. [] button: Skips to the next track. [] button: Returns to the beginning of the track being played.
65 How to use the NOB remote control Switching the remote contr ol settings Remote control functions can be switched to the three patterns. 1 . Press the [CUSTOM] button of the main unit for about one second. 2 . Each time the button is pressed, the pattern is switched in the order of A, B, and C so that the E-com function can be supported.
How to use the NOB remote control 66 Replacing the battery Use two AA-size batteries. 1 . Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow. 2 . Install the two batteries provided into the compartment as illustrated inside the compartment.
67 How to use the NOB remote control Caution • Be extremely careful not to swallow the battery. • The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lamp gets dim, replace the batteries.
How to use an optional Card remote control 68 How to use an optional Card remote control Tu r ning the power on/off When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. 1 . Press the [PWR] button.
69 How to use an optional Card remote control Switching playback modes 1 . Press the [MODE] button. Tap the button to switch modes in the following sequence: How to play the tuner Select the tuner mode first. Selecting the FM/AM band 1. Tap the [BAND] button.
How to use an optional Card remote control 70 Selecting a station (manually or automatically) A short tap of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. 1. Press the [ TUNE•SEEK ] button.
71 How to use an optional Card remote control Advancing to the next track or returning to the beginning of the track being played 1. Press the [ TRACK•APS ] button. [] button: Skips to the next track. [] button: Returns to the beginning of the track being played.
How to use an optional Card remote control 72 Switching the r emote control settings Remote control functions can be switched to the three patterns.
73 How to use the NOB remote control Replacing the battery Use one CR2025 battery. 1 . On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carrier with your fingernail.
How to operate the receiver with an optional CD changer connected 74 74 [ BND ] button [ TU ] button [SOURCE] button How to operate the receiver with an optional CD changer connected Basic operation This section covers the operation of an optional CD changer that is connected to the receiver.
75 How to operate the receiver with an optional CD changer connected Buttons [4] to [6] Playing the beginning of tracks (SCAN): 1. Press button [4 (SCAN)].
How to operate the receiver with an optional CD changer connected 76 76 [MODE] button Buttons [1] to [6] •Occasionally the same track happens to be played (selected) two or three times in a row, but it is no sign of a problem.
77 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected How to operate the DSP functions The DSP feature adds reverberations to simulate ambience in different types of surroundings (room sizes).
78 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected Fine-tuning an individual room-size mode Detailed adjustments are available in any of the room size modes. 1. After pressing the [FUNC] button, hold button [1] down for more than a second.
79 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected 3. Turn the [ AUDIO CONTROL ] button. This button adjusts the reverberation level and duration. Turn to the right : Increases the value. Turn to the left : Decreases the value.
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected 80 80 Selecting a preset pattern fr om memory Press a preset button to select the room size in memory. The buttons under which room sizes are stored in memory are called preset buttons.
81 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected [FUNC] button Button [2] How to operate the EQ functions The EQ functions enable level adjustments of various frequency groups for optimum listening conditions with a specific kind of music or musical instrument.
82 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected 82 Fine-tuning EQ functions 1. After pressing the [FUNC] button, tap button [2] until the desired equalizer mode is displayed. 2. Hold button [2] down for more than one second.
83 How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected 5. Hold down a button, [1] to [6], for more than two seconds to preset a value. The preset value is overwritten by the value set using the above steps. When the preset value is changed, the display shows as follows: USER 1~6 (Preset ch No.
84 Buttons [1] to [4] [FUNC] button How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected (Refer to page 28.) 84.
85 Buttons [1] to [3] [FUNC] button Button [6] [A UDIO CONTROL] button How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected How to operate the Digital Sound Processor In case the 39011 Digital Sound Unit is connected to the CD Tuner, a CD recorded by DTS cannot be decoded.
86 [A UDIO CONTROL] button Buttons [1] to [6] [FUNC] button How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected 86 6.
87 Buttons [1] to [6] [FUNC] button How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected Adjusting the delay (distance) setting speaker 1. Press the [FUNC] button. 2. Press and hold button [3] for more than two seconds to shift to the setting mode.
88 [FUNC] button Button [4] How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected 88 4. Press the [AUDIO CONTROL] button to select the speaker to be adjusted. 5. Turn the [AUDIO CONTROL] button to the left or right to adjust the speaker level.
89 [FUNC] button Button [4] How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected Calling the level memory The stored speaker level is called. 1. Press the [FUNC] button. 2. Press button [3] for less than one second.
90 [FUNC] button Button [6] Switching the input channel If the button is pressed during normal radio reception, or when playing back a CD, the input channel being used at that time will be displayed, and you can then select an external input channel.
91 [FUNC] button Button [5] How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected Switching the surround playback mode 1. Press the [FUNC] button. 2. Press button [5]. The surround mode will changes in the following order each time the button is pressed.
If you have a question: 92 92 If you have a question: First check the items mentioned below before attempting to troubleshoot problems. Caution If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a sharp tool.
Displayed information (for tr oubleshooting) The information listed in the chart below is displayed to show the status of the tape player and CD changer. Refer to the chart for the appropriate action. Information Code Table When "INFO " flashes on the indicator Nos.
If you have a question: 94 94 Dead or weak sound Power does not turn on. Frequencies or titles set in memory are deleted. No guide tone sounds. The remote control does not work.
95 If you have a question: Mode Problem Causes Remedial action to take Receives no stations, or receives static noise. Extend the antenna. Tune to a station. Tune to a local station. (Please note, there may be no local stations servicing the area where you are currently driving.
Specifications 96 96 Specifications < GENERAL > Power Supply 14.4 V DC (11-16 V) Current Drain 2A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6 - 1/8" (178 x 50 x 155 mm) < FM TUNER > Frequency Range 87.
97 Before installation Before installation Notes Be sure to disconnect the vehicle battery's negative terminal before installing the receiver.
Mounting instruction 98 Mounting instruction Mounting the main unit 1 . Insert the mounting sleeve into the opening in the vehicle console. 2 . Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve.
99 Mounting instruction 4 . Mount the stud bolt to the main unit. 5 . Insert the main unit into the mounting sleeve until it locks in place. 6 . F asten the rear of the main unit using either method [A] or [B]. Select method [A] or [B] to suit the interior configuration of the vehicle.
Mounting instruction Notes To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads. If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).
Mounting instruction System 5 101.
Mounting instruction 102 CD8061 + 5083 + Power Amplifier NON-F ADER(-) L R TO BA TTERY + 12V (Permanent Supply) ANTENNA PLUG MP3 unit INTERCONNECTING CABLE TO SIGNAL INPUT OF AUXILIARY POWER AMPLIFIER.
103 Mounting instruction CD8061 + 5083 + Power Amplifier (for BALANCE-IN) NON-F ADER(-) L R TO BA TTERY + 12V (Permanent Supply) ANTENNA PLUG MP3 unit INTERCONNECTING CABLE TO SIGNAL INPUT OF AUXILIAR.
Mounting instruction 104 CD8061 + 5083 + 5083 + Power Amplifier ANTENNA PLUG INTERCONNECTING CABLE 3 ) 2P 2P 13P ( A ) ( B ) 13P 13P 5083 5083 TO GROUND Red Blue Orange/White Blue/White Pink Black 3 1.
105 Mounting instruction CD8061 + 2031 + 5083 + Power Amplifier 4 ) NON-F ADER(-) L R 13 FRONT(-) 11 REAR(-) 12 FRONT(+) 9 REAR(+) L R L R L R L R 8 L R NON-F ADER(+) 10 TO SIGNAL INPUT OF AUXILIARY P.
Mounting instruction 106 CD8061 + 39011 + 5083 + Power Amplifier 5 ) INTERCONNECTING CABLE 12 TO POWER ANTENNA RELA Y TO HEADLIGHT SWITCH TO TURN-ON LEAD OF EACH UNIT TO ACC (Power Supply) Red Blue Or.
107 IMPOR T ANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL IN YOUR SOCK DRA WER..
DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 (310) 327-2151 090001-13930700 0101MT (N.O) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD8061 for identification. The serial number is labeled or stamped on the chassis.
An important point after buying a device Eclipse - Fujitsu Ten CD8061 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eclipse - Fujitsu Ten CD8061 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eclipse - Fujitsu Ten CD8061 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eclipse - Fujitsu Ten CD8061 you will learn all the available features of the product, as well as information on its operation. The information that you get Eclipse - Fujitsu Ten CD8061 will certainly help you make a decision on the purchase.
If you already are a holder of Eclipse - Fujitsu Ten CD8061, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eclipse - Fujitsu Ten CD8061.
However, one of the most important roles played by the user manual is to help in solving problems with Eclipse - Fujitsu Ten CD8061. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eclipse - Fujitsu Ten CD8061 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
