Instruction/ maintenance manual of the product BEC105 Eclipse - Fujitsu Ten
Go to page of 12
1 Be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional techniques and experience are required in order to install this system.
2 Waterproof cushion x 1 7 Harness affixing tape x 2 6 ※ Rear camera x 1 1 Bracket x 1 2 Screw (M3x6)x 2 3 Rear Camera Components Double-sided tape (Spare) x 1 4 Cable rail x 6 5 Components Componen.
3 • • Bundle cables and harnesses with electrical tape or wire ties to prevent them from interfering with moving parts. If they should entangle with the steering wheel, shift lever or brake pedal, an accident may result. • • Do not disassemble or rebuild this product.
4 P P oints to note after installing the rear camer oints to note after installing the rear camer a a - Method of use - • • Do not place too much reliance on the back-eye camera. • • The backeye camera is meant to be used as a supplementary aid to help in avoiding obstructions.
5 Installation Diag Installation Diag r r am am Rear camera cable Rear camera 1 3-28510 BEC105 A5 版（英語） 05.8.23 6:46 PM ページ5.
6 Notes on installation • Check the installation position prior to installing to ensure that the rear camera and the camera cable does not interfere with the opening and closing of the back door. • Do not peel the double-sided tape away from its backing paper.
7 Decide on the installation position for the rear camera. １ - If installing underneath a rear spoiler (example) - - If installing directly to the back door (example) - Front of vehicle Note the following when deciding on the installation position for the rear camera.
8 - If installing underneath a rear spoiler (example) - Pull the rear camera cable inside the back door while securing it with the cable rails and commercially-available clamp. 5 Front of vehicle Cable rail 5 Cable rail 5 Rear camera 1 Clamp • The cable rails should be cut to appropriate lengths.
9 – If installing underneath a rear spoiler (example) – Wipe the installation surface free of any dirt, water or grease. 6 Peel off the backing paper from the double-sided tape on the bracket, and affix the bracket to a flat part of the back door.
10 Weatherstrip • Confirm that the rear camera cable does not get pulled and that the cable ties and clamps do not come off when the back door is opened and closed. • Take care when routing the cable through the trunk to ensure that rainwater cannot get inside the vehicle.
11 Camer Camer a Angle Adjustment a Angle Adjustment • When adjusting the camera images, apply the vehicle's parking brake and be sure to chock the wheels of the vehicle so that the vehicle will not move, otherwise accidents or injuries may occur.
12 System connection e System connection e xample xample • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
An important point after buying a device Eclipse - Fujitsu Ten BEC105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eclipse - Fujitsu Ten BEC105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eclipse - Fujitsu Ten BEC105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eclipse - Fujitsu Ten BEC105 you will learn all the available features of the product, as well as information on its operation. The information that you get Eclipse - Fujitsu Ten BEC105 will certainly help you make a decision on the purchase.
If you already are a holder of Eclipse - Fujitsu Ten BEC105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eclipse - Fujitsu Ten BEC105.
However, one of the most important roles played by the user manual is to help in solving problems with Eclipse - Fujitsu Ten BEC105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eclipse - Fujitsu Ten BEC105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
