Instruction/ maintenance manual of the product SRM-2100, 2110 Echo
Go to page of 37
Grass T rimmer/Brush Cutter Operator's Manual MODELS, T ype 1E SRM - 2100, 21 10 Serial Number 982333 & Up X7532278902 89861554132 11/01 W ARNING DANGER Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual.
.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 3 The circle with the slash symbol means whatever is shown within the circle is prohibited. IMPORTANT The enclosed message provides information necessary for the protection of the unit. NOTE This enclosed message provides tips for use, care and maintenance of the unit.
4 Shaft Decal W ARNING DANGER • This unit can be dangerous and cause serious injury if improperly used. To reduce injury risk to operator, helpers and bystanders, read and understand the Operator's and Safety manuals. • Blindness can occur from objects that are thrown or ricocheted even with shield in place.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 5 S AFETY I NSTRUCTIONS PERSONAL CONDITION AND SAFETY EQUIPMENT W ARNING DANGER Trimmer/Brush Cutter users risk injury to themselves and others if the trimmer/brush cutter is used improperly and or safety precautions are not followed.
6 Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI).
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 7 SAFE OPERA TION W ARNING DANGER Do not operate this product indoors or in inadequately ventilated areas.
8 CONTENTS LIST ITEMS 1 - POWER HEAD 1 - DRIVE SHAFT ASSEMBLY 1 - PLASTIC BAG (CO-PACK) - 1, OPERATOR'S MANUAL - 1, SAFETY MANUAL - 1, WARRANTY REGISTRATION CARD - 1, LIMITED WARRANTY STATEMENT - 1, PLASTIC SHIELD - 1, PLASTIC SHIELD HARDWARE --1, SHIELD PLATE --3, 5MM X 15MM SCREWS (SHIELD MTG.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 9 SAFETY VIDEO 1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 25 4 22 21 23 24 20 4.
10 1. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter. 2. GRIP - Rear (right hand) handle. 3. THROTTLE TRIGGER LOCKOUT - This lever must be held down during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is depressed.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 11 S PECIFICA TIONS * Install and use U-Handle when operating any model with blade. L E D O M0 0 1 2 - M R S0 1 1 2 - M R S h t g n e L ) . n i 9 5 ( m m 0 0 5 1 h t d i W ) . n i 0 . 3 1 ( m m 0 3 3) .
12 PLASTIC SHIELD INST ALLA TION (for Nylon Line Operation) Tools Required: Screwdriver. Parts Required: Plastic Shield, Shield Plate, three (3) 5mm x 15mm screws. NOTE The plastic shield is for use with the Nylon Line Head only. Install Metal Shield when using plastic or metal blades.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 13 BLADE INST ALLA TION All Models. IMPORTANT If non-standard monofilament head, METAL/PLASTIC blade or cultivator etc. is used, THE CARBURETOR MUST BE RE-SET or serious engine damage may occur.
14 Install Harness Clamp NOTE Some models require installation of Harness Clamp. If your unit does not have a clamp, follow these directions. Tools Required: Screwdriver, 8mm x 10mm Open End Wrench. Parts Required : Clamp, 4mm x 18mm Hexagon Head, Bolt, Link.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 15 THROTTLE LINKAGE AND IGNITION LEADS Tools Required: 8mm x 10mm open end wrench (all models), 3mm Allen Wrench. 1 . Close choke and remove air filter cover. 2 . Loosen nut (A) and place threaded end of throttle linkage in bracket slot.
16 G E D F U - HANDLE INST ALLA TION Tools Required : 8mm x 10mm Open End Wrench, Slotted Screwdriver, (3mm Hex Wrench SRM-2100 only.) Parts Required: U-Handle Kit. (SRM-2100) P/N 35130454130 NOTE On model SRM-2110 use Steps 1, 10, 11, and 13 - 17 only.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 17 1 1 . Secure throttle linkage and leads to drive shaft with cable clips supplied. 1 2 . Install power head and align gear box, power head and U-handles. Tighten all screws. 1 3 . Place throttle linkage in slot in bracket with one nut (A) and washer on each side of bracket.
18 Choosing the Correct Blade WARNING DANGER The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick out and injury to yourself and bystanders.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 19 Plastic/Nylon Blades may be used where ever the nylon line head is used. DO NOT use this blade for heavy weeds or brush! 8 Tooth Weed/Grass Blade P/N 69600120331 is designed for grass, garden debris and thick weeds.
20 FUEL Fuel Requirements Gasoline - Use 89 Octane [ ] gasoline or gasohol known to be good quality. Gasohol may contain up to 10% Ethyl (grain) alcohol or 15% MTBE (methyl tertiary-butyl ether). Gasohol containing methyl (wood) alcohol is NOT approved.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 21 O PERA TION ST ARTING COLD ENGINE W ARNING DANGER The cutting attachment should not move at idle.
22 A ST ARTING W ARM ENGINE The starting procedure is the same as Cold Start except DO NOT close the choke. W ARNING DANGER The cutting attachment should not move at idle.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 2 3 M AINTENANCE Your ECHO unit is designed to provide many hours of trouble-free service. Regular scheduled maintenance will help your unit achieve that goal.
24 AIR FIL TER Level 1. Tools required: Cleaning Brush Parts required: 90008 REPOWER AIR & FUEL FILTER KIT. 1 . Close choke (Cold Start Position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumu- lated dirt from the air cleaner area.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 25 SP ARK PLUG Level 2. Tools required: Scrench (combination socket wrench and screw driver supplied with unit), Feeler gauge (preferably a wire gauge), Soft metal brush Parts Required: Spark Plug NGK BPM-7A 1 .
26 EXHAUST SYSTEM Spark Arrestor Screen Level 2. Tools required: Cross-head screwdriver, soft metal brush, wooden carbon scraper. Parts Required: Screen P/N 14586240630, Gasket Lid P/N 14586642031 1 . Remove engine cover (A). See “Cleaning Cooling System” pages 25 & 26 for step by step instructions.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 27 CARBURETOR ADJUSTMENT Emission Models Level 2. Tools required: Slotted Screwdriver w/2 mm blade width, Tachometer (ECHO P/N 99051130017) Parts required: None.
28 LUBRICA TION Level 1. Tools required: 8 mm Open End Wrench, Cross Head Screwdriver, Clean rag Parts Required: ECHO ® LUBE TM 8 oz. (P/N 91014) or Lithium Base Grease. Gear Housing 1 . Clean all loose debris from gear box. 2 . Remove plug (A) and check level of grease.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 29 1 . Shut engine off. Lay unit on the ground with head assembly up. 2 . Hold drum (A) and turn spool (B) CW (clockwise) until it stops. Pull spool from drum. DO NOT push in on spool when turning.
30 SHARPENING MET AL BLADES Three styles of metal blades are approved for use on the ECHO Brush Cutter. The 8-tooth blade can be sharpened during normal mainte- nance.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 31 T ROUBLESHOOTING W ARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark near an open spark plug opening, otherwise serious personal injury may result.
32 2 . Place the stop switch in the "OFF" position. 3 . Remove accumulation of grease, oil, dirt, and debris from exterior of unit. 4 . Perform all periodic lubrication and services that are required.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 33 NOTES.
34 NOTES.
G RASS T RIMMER /B RUSH C UTTER O PERA TOR ' S M ANUAL 35 NOTES.
S ER VICING I NFORMA TION P ARTS Genuine ECHO Parts and ECHO Re Power Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number, Type number and Serial Number of the unit with you.
SUPLEMENTO DEL MANUAL DEL OPERADOR NÚMERO DE PIEZA X7532278902 (89861554132) P ARA LOS MODELO: SRM-2100 S/N 991201 y Superior , SRM-21 10 S/N 510001 y Superior Utilice por favor este suplemento manua.
An important point after buying a device Echo SRM-2100, 2110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo SRM-2100, 2110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo SRM-2100, 2110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo SRM-2100, 2110 you will learn all the available features of the product, as well as information on its operation. The information that you get Echo SRM-2100, 2110 will certainly help you make a decision on the purchase.
If you already are a holder of Echo SRM-2100, 2110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo SRM-2100, 2110.
However, one of the most important roles played by the user manual is to help in solving problems with Echo SRM-2100, 2110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo SRM-2100, 2110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
