Instruction/ maintenance manual of the product PE-2000 Type 1/1E Echo
Go to page of 28
P OWER E DGER O PERA TOR ' S M ANUAL 1 Power Edger Operator's Manual MODELS PE-2000 T ype 1/1E Serial Number 001001 & Up PE-2000 T ype 2E Serial Number 508036 & Up 89861058832 08/01 .
2 I NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations tips and SAFETY messages.
P OWER E DGER O PERA TOR ' S M ANUAL 3 The circle with the slash symbol means whatever is shown within the circle is prohibited. This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders.
4 INTERNA TIONAL SYMBOLS S AFETY I NSTRUCTIONS PERSONAL CONDITION AND SAFETY EQUIPMENT W ARNING DANGER Edger users risk injury to themselves and others if the edger is used improperly or safety precautions are not followed. Proper clothing and safety gear must be worn when operating an edger.
P OWER E DGER O PERA TOR ' S M ANUAL 5 EXTENDED OPERA TION / EXTREME CONDITIONS V ibration and Cold It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold.
6 SAFE OPERA TION W ARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. • Provide all operators of this equipment with the Operator's Manual and Safety Manual for instructions on safe operation.
P OWER E DGER O PERA TOR ' S M ANUAL 7 20 21 D ESCRIPTION The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and positioning of the front handle are necessary. After opening the carton, check for damage.
8 20 21 CONTENTS __ 1, Edger Assembly __ 1, Power Head __ 1, Drive Shaft Assembly __ 1, Plastic Bag (Co-Pack) __ 1, Operators Manual __ 1, Safety Manual __ 1, Warranty Registration Card __ 1, ECHO Emissions and Warranty Statement __ 1, 50:1 1 Gal.
P OWER E DGER O PERA TOR ' S M ANUAL 9 1. TOP GUARD - Protects arm from the hot engine. 2. FRONT HANDLE - The front handle can be repositioned for comfortable operation by loosening the screws and moving the handle. 3. SHAFT DECAL (See page 3) 4.
10 A SSEMBL Y S PECFICA TIONS L E D O ME 2 / E 1 0 0 0 2 - E PE 1 / 1 0 0 4 2 - E PE 1 / 1 0 0 1 3 - E P h t g n e L) . n i 0 . 9 6 ( m m 3 5 7 1) . n i 7 . 9 6 ( m m 0 7 7 1) . n i 7 . 0 7 ( m m 5 9 7 1 h t d i W) . n i 0 . 3 1 ( m m 0 3 3) . n i 0 .
P OWER E DGER O PERA TOR ' S M ANUAL 11 DRIVE SHAFT / POWER HEAD Tools Required: 8mm x 10mm Open End Wrench (PE-2000, PE-2400), 4mm Hex Wrench (PE-3100) 1 . Stand engine on a level surface. 2 a. (PE-2000/2400) Loosen the two bolts (A) at drive shaft end of engine.
12 PE-2400 PE-3100 FRONT HANDLE PE-2400 PE-3100 NOTE Steps 5, 6 & 7 required for PE-2400 and PE-3100 only. 5 . Connect ignition leads (C). 6 . (PE-2400) Secure ground lead under screw (D) on housing. 7 . Install air filter and cover. FRONT HANDLE Tools Required:Cross-Head Screwdriver (PE-2000) 1 .
P OWER E DGER O PERA TOR ' S M ANUAL 13 P RE -O PERA TION FUEL Fuel Requirements Gasoline - Use 89 Octane [ (R+M) ÷ 2 ] gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether).
14 O PERA TION ST ARTING COLD ENGINE NOTE • Check unit for loose nuts, bolts and screws before starting. • Always clear work area of debris before starting operation. • Always position the unit firmly on the ground before starting. • When pulling recoil starter rope, use short pulls, 1/2 to 2/3 of rope length.
P OWER E DGER O PERA TOR ' S M ANUAL 15 ST ARTING W ARM ENGINE W ARNING DANGER Blade should not move at idle. If blade moves, readjust carburetor according to Carburetor Adjustment instructions in the manual or see your ECHO dealer, otherwise serious personal injury may result.
16 INCREASE DEPTH OPERA TING TECHNIQUES 1 . Before edging, water the area to soften the ground to make edging easier . 2 Before edging, check the area and remove all obstacles and objects that could be thrown. 3 . Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass.
P OWER E DGER O PERA TOR ' S M ANUAL 17 M AINTENANCE Your ECHO edger is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your edger achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance.
18 AIR FIL TER Level 1. Tools required: Cleaning brush, 25 or 50 mm (1 or 2 in.) medium bristle paint brush. Parts required: (PE-2000) 90008 REPOWER AIR & FUEL FILTER KIT (PE-2400/3100) 90030 REPOWER AIR & FUEL FILTER KIT 1 . Close choke (Cold Start Position).
P OWER E DGER O PERA TOR ' S M ANUAL 19 SP ARK PLUG Level 2. Tools required: Scrench (combination socket wrench and screwdriver) and Feeler gauge (preferably a wire gauge), Soft Metal Brush Parts Required: Spark Plug, PE-2000 NGK BPM-7A PE-2400, 3100 NGK BPM-7Y 1 .
20 NOTE The throttle linkage remains assembled to the cover and the spark plug lead and grommet remain installed. IMPORTANT DO NOT use a metal scraper to remove dirt from the cylinder fins. 3 . Use the wooden stick or brush to remove dirt from the cylinder fins.
P OWER E DGER O PERA TOR ' S M ANUAL 21 CARBURETOR ADJUSTMENT T ype 1E Emission Models Level 2. Parts required: None. NOTE Every unit is run at the factory and the carburetor is set in compli- ance with EPA Phase 1 and California Emission Regulations.
22 CARBURETOR ADJUSTMENT T ype 1 Non-Emission Models NOTE If carburetor has limiter caps follow "Carburetor Adjustment" procedures for Type 1E models on previous page.
P OWER E DGER O PERA TOR ' S M ANUAL 23 LUBRICA TION Level 1. Tools Required: Scrench, Locking Tool, Screwdriver, 8 mm Open End Wrench Parts Required: Echo Lube TM 8 oz. (P/N 91014) or Lithium Base Grease, Blade NOTE Grease gear case every 50 hours of use.
24 6 . Install inner blade adapter (B) onto PTO shaft (C). 7 . Install and center blade (F) onto inner adapter (B). W ARNING DANGER Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combination. Read and comply with all safety instructions listed in this manual and safety manual.
P OWER E DGER O PERA TOR ' S M ANUAL 25 T ROUBLESHOOTING W ARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark near an open spark plug opening, otherwise serious personal injury may result.
26 S TORAGE W ARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.
P OWER E DGER O PERA TOR ' S M ANUAL 27 NOTES.
S ER VICING I NFORMA TION P ARTS Genuine ECHO Parts and ECHO Re Power Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number, Type number and Serial Number of the unit with you.
An important point after buying a device Echo PE-2000 Type 1/1E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo PE-2000 Type 1/1E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo PE-2000 Type 1/1E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo PE-2000 Type 1/1E you will learn all the available features of the product, as well as information on its operation. The information that you get Echo PE-2000 Type 1/1E will certainly help you make a decision on the purchase.
If you already are a holder of Echo PE-2000 Type 1/1E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo PE-2000 Type 1/1E.
However, one of the most important roles played by the user manual is to help in solving problems with Echo PE-2000 Type 1/1E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo PE-2000 Type 1/1E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
