Instruction/ maintenance manual of the product ES-210 Echo
Go to page of 24
SHRED 'N' V AC ® Operator's Manual MODEL ES-210 Serial Number 05001001 - 05999999 X753000720 03/03 X7531130200 W ARNING DANGER Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual which must be read and understood for proper and safe operation.
2 I NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and SAFETY messages.
3 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL IMPORTANT The enclosed message provides information necessary for the protection of the unit. NOTE This enclosed message provides tips for use, care and maintenance of the unit. S AFETY DECALS Locate these safety decals on your unit.
4 W ARNING DANGER SHRED ‘N’ VAC® users risk injury to themselves and others if the SHRED ‘N’ VAC® is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating SHRED ‘N’ VAC®.
5 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL EQUIPMENT • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.
6 IMPORTANT ENGINE INFORMATION ENGINE FAMILY: 3EHXS.0214EA DISPLACEMENT: 21.2 cc EMISSION COMPLIANCE PERIOD: 300 Hours THIS ENGINE MEETS U.S. EPA PH 2 EMISSION REGULATIONS FOR SMALL NONROAD ENGINES. REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
7 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL 1 2 3 5 6 7 8 9 10 11 12 4 13 14 D ESCRIPTION CONTENTS __ 1 - Power Head __ 1 - Straight Pipe __ 1 - Pipe with Nozzle __ 1 - SHRED 'N&ap.
8 14. BLOWER PIPES - Twist lock design. 15. PRIMER BULB - Pumping primer bulb before starting engine draws fresh fuel from the fuel tank, priming the carburetor for starting. Pump primer bulb until fuel is visible and flows freely in the clear fuel tank return line.
9 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL A SSEMBL Y W ARNING DANGER Never perform maintenance or assembly procedures with engine running, or serious personal injury may result. BLOWER APPLICA TION Install Blower Pipes 1 . Align grooves in straight pipe with pegs on blower housing and slide pipe onto housing.
10 4 . Align grooves in discharge elbow with pegs on blower, and slide elbow (D) on to blower. Turn elbow counterclockwise to lock in place. Elbow must angle back toward operator position as shown. 5 . Place debris bag opening over flared end of elbow, and cinch bag (E) securely with Velcro strap.
11 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL IMPORTANT Spilled fuel is a leading cause of hydrocar- bon emissions. Some states may require the use of automatic fuel shut-off contain- ers to reduce fuel spillage. Contact your ECHO dealer for ordering information.
12 O PERA TION ST ARTING COLD ENGINE 1. Stop Switch Move stop switch button (A) away from the STOP position. 2. Throttle Position Lever Move throttle position lever (B) midway between idle and full throttle positions. 3. Choke Move choke (C) to Cold Start ( ) Position.
13 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL ST ARTING W ARM ENGINE The starting procedure is the same as Cold Start except DO NOT close the choke. 1. Stop Switch Move stop switch button (A) away from the STOP position. 2. Throttle Position Lever Move throttle position lever (B) forward to idle position.
14 BLOWER OPERA TION W ARNING DANGER Always wear safety glasses, hearing protection and a face filter mask or serious personal injury may result. Do not point the blower pipe in the direction of people or pets. Never operate unit without either housing cover grill or vacuum tube installed on unit securely, otherwise bodily harm may result.
15 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL SHRED ‘ N ’ VA C ® OPERA TION W ARNING DANGER Flying debris hazard. Never operate unit as a vacuum unless discharge elbow is installed and debris bag is securely cinched to elbow. Failure to follow instructions can result in serious injuries.
16 M AINTENANCE Your ECHO blower is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your blower achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance.
17 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL AIR FIL TER Level 1. Tools required: 25-50 mm (1-2 in.) cleaning brush. Parts required: Air Filter NOTE Clean daily. 1 . Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed.
18 COOLING SYSTEM CLEANING Level 2. Tools required: 25-50 mm (1-2 in.) cleaning brush, 3 mm hex wrench, cross head screwdriver Parts Required: None, if you are careful. IMPORTANT To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area.
19 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL EXHAUST SYSTEM Spark Arrestor Screen Level 2. Tools required: Cross Head Screwdriver, 3 mm Hex Wrench, soft metal brush Parts Required: Spark arrestor screen P/N 14586240630, Gasket P/N 14586642031 IMPORTANT Carbon deposits in muffler will cause a drop in engine output and overheating.
20 SHREDDER BLADE Level 1. W ARNING DANGER Never remove vacuum tube or open fan guard when SHRED ‘N’ VAC ® is running or serious personal injury may result. Always wear heavy-duty work gloves when working in shredder blade area. 1 . With engine stopped, remove spark plug wire, loosen clamp and pull vacuum tube from unit.
21 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL CARBURETOR ADJUSTMENT Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break- in period your engine performance will increase and exhaust emissions will stabilize.
22 W ARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by ground- ing spark plug against cylinder, otherwise serious personal injury may result.
23 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL S TORAGE W ARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.
DEALER? Call 1-800-432-ECHO or www.echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.S.T. ECHO, INCORPORA TED 400 Oakwood Road Lake Zurich, IL 60047 www .
An important point after buying a device Echo ES-210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo ES-210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo ES-210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo ES-210 you will learn all the available features of the product, as well as information on its operation. The information that you get Echo ES-210 will certainly help you make a decision on the purchase.
If you already are a holder of Echo ES-210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo ES-210.
However, one of the most important roles played by the user manual is to help in solving problems with Echo ES-210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo ES-210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
