Instruction/ maintenance manual of the product EDR-2100 Echo
Go to page of 16
.
1 THIS SYMBOL ACCOMPANIED BY THE WORDS WARNING AND DANGER CALLES ATTENTION TO AN ACT OR CONDITION THAT CAN LEAD TO SERIOUS PERSONAL INJURY TO OPERATOR AND BYSTANDERS. WARNING DANGER IMPROPER USE OR CARE OF THIS UNIT, OR FAILURE TO WEAR PROPER PROTECTION CAN RESULT IN SERIOUS INJURY.
2 WARNING DANGER ALWAYS STOP THE ENGINE WHEN A DRILL JAM OCCURS. DO NOT ATTEMPT TO REMOVE AN OBJECT CAUSING A DRILL JAM IF THE ENGINE IS RUNNING. PHYSICAL INJURY CAN OCCUR IF A DRILL JAM IS REMOVED AND THE DRILLS START MOVING. • Do all drilling at full throttle speed.
3 • Wear non-slip, heavy-duty work gloves to improve your grip on the engine drill handles. The gloves also help reduce the transmission of machine vibrations to your hands. PR O TECTING O THERS Spectators, children, fellow workers and animals must be warned to come no nearer than 4.
4 Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activites may put you at a high risk for developing a Repetitives Stress Injury (RSI).
5 • When starting to drill, run the engine at full throttle. WARNING DANGER BEFORE DRILLING, BE SURE TO READ AND UNDERSTAND THE ENTIRE OPERATOR’S MANUAL TO AVOID THE CHANCE OF SERIOUS INJURY. • Do not force the drills and only move as quickly as the drills will allow.
6 DESCRIPTION 1 Operator’s manual - Included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques. 2. Throttle trigger - Device activated by the operator’s finger, for controlling the engine speed.
7 ASSEMBLING • Incert the front handle to the machine, and turn clockwise. (TIGHTEN THE SCREW FIRMLY) FR ONT HANDLE Front handle DRILL BIT • Insert the drill bit (not provided with unit) until it reaches the bottom of the chuck, then back it out slightly; tighten the chuck laws evenly and completely.
8 IMPORTANT Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Stored two-stroke fuel may separate.
9 • This model is equipped with reverse rotation mechanism. • When drilling, set shift lever down to clockwise (CW) rotation position. • If bit is locked due to deep penetration during drilling operation, set shift lever up to counterclockwise (CCW) rotation position and operate reversed for easy pulling-out.
10 AREA MAINTENANCE PAGE BEFORE MONTHLY YEARLY DATE USE MAINTENANCE PERFORMED Air Filter Clean/Replace 12 • Fuel Filter Inspect/Replace 12 • Spark Plug Inspect/Clean/ 1 2 • Adjust/Replace Carbur.
11 WARNING DANGER ALL ENGINE DRILL SERVICING, OTHER THAN THE ITEMS LISTED IN THE OPERATOR’S MANUAL SHOULD BE PERFORMED BY AN AUTHORIZED ECHO DEALER. TR OUBLESHOO TING Trouble Engine - starts hard Ca.
12 MAINTENANCE AIR FIL TER • Clean before Use. - Remove air cleaner cover and pull out air fillter. - Lightly brush off dust or wash it in water and detergent. - Dry completely before putting it back in place. Fuel filter Cap • Check periodically.
13 Replacement of chuck should be done in the following manner: 1. Remove bolt with hexagonal hole fixed in the driving axle. 2. Insert accessory hexagonal bar into chuck and fix.
14 ST ORA GE 6. Drain the fuel tank completely and pull the starter handle several times to remove fuel from the carburettor. 7. Remove the spark plug and pour 1/2 tablespoon (1/4 oz) of fresh, clean, 2- stroke engine oil into the cylinder through the spark plug hole.
15 SPECIFICA TIONS EDR-2100 Masses kg 4.6 (10.1 lbs ) Volume fuel tank L 0.5 (16.9 US, fl. oz.) Drill size (Max) mm 30 chuck capacity mm 13 (0.5 inch) speed r/min 430 Mission reduction ratio 17.1 (regular side) 18.6 (reverse side) lubrication grease External Dimensions length x width x height mm 420 x 328 x 255 (16.
An important point after buying a device Echo EDR-2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo EDR-2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo EDR-2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo EDR-2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Echo EDR-2100 will certainly help you make a decision on the purchase.
If you already are a holder of Echo EDR-2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo EDR-2100.
However, one of the most important roles played by the user manual is to help in solving problems with Echo EDR-2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo EDR-2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
