Instruction/ maintenance manual of the product M1866PW 3M
Go to page of 31
3M Touch Systems, Inc. Proprietary Information – TSD-40532C 3M ™ Multi-Touch Desktop Display User Guide For the Multi-Touch Desktop Product Line: M1866PW, M2167PW, M2467PW, and M2767PW Read and understand all safety information contained in this document before using this product.
2 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C The information in this document is subject to change without notice.
3M™ Multi-Touch Desktop Display User Guide 3 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Content s Chapter 1 Introduction Overview ............................................................................................
4 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Appendix A 3M™ PX USB Controller Communications Overview of USB Firmware Comm unications ...............................................
3M™ Multi-Touch Desktop Display User Guide 5 3M Touch Systems, Inc. Proprietary Information – TSD-40532C CHAPTER 1 Introduction Overview Congratulations on the purchase of your 3M™ Multi-Touch Desktop Display. This guide describes how to set up your Multi-Touch Desktop Display.
6 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C By combining industry-leading multi-touch performance, vibrant high-definition graphics, an.
3M™ Multi-Touch Desktop Display User Guide 7 3M Touch Systems, Inc. Proprietary Information – TSD-40532C WARNING To avoid the risk of electric shock which could result in serious injury or death: • Do not expose the display to rain or other sources of water, steam, or moisture.
8 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Important Notes • In extreme temperature and humidity s ituations, you ma y observe condensation between the touch screen and the display.
3M™ Multi-Touch Desktop Display User Guide 9 3M Touch Systems, Inc. Proprietary Information – TSD-40532C CAUTION To avoid the potentially hazardous situations associated with the use of alcohol or.
10 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C CHAPTER 2 Setting up Y our Multi-T ouch Desktop Display This chapter describes how to set up your 3M Touch Systems Multi-Touch Desktop Display.
3M™ Multi-Touch Desktop Display User Guide 11 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Unpacking Your Touch Display Carefully unpack the carton and inspect the contents.
12 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C To connect the Multi-Touch Desktop Display: 1. Turn off your computer. You should always turn off the computer before connecting or disconnecting a device.
3M™ Multi-Touch Desktop Display User Guide 13 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Note: Do not use longer screws as they could potentially damage electronics inside the display.
14 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Configuring the Display Settings After you connect your Multi-Touch Desktop Display and turn on your computer, you may need to configure one or more of these display settings.
3M™ Multi-Touch Desktop Display User Guide 15 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Menu/Select —/Decrease +/Increase Cycle/Exit Power Note : The OSD provides a quick guide to these buttons as shown below. When the OSD is activated, the image will appear over the buttons for easy reference.
16 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C OSD Choices Description SIGNAL SELECT Choices are VGA, HDMI, DP, or Exit Selects the appli.
3M™ Multi-Touch Desktop Display User Guide 17 3M Touch Systems, Inc. Proprietary Information – TSD-40532C OSD Choices Description IMAGE Choices are Auto Tune, Clock, Phase, H. Position, V. Position, or Exit AUTO TUNE Performs automatic configuration of the Clock, Phase, Vertical and Horizontal positions.
18 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C OSD Choices Description TOOLS Choices are OSD Timing, OSD Horizontal, OSD Vertical OSD TIMING Adjust how long the menu remains on the screen.
3M™ Multi-Touch Desktop Display User Guide 19 3M Touch Systems, Inc. Proprietary Information – TSD-40532C CHAPTER 3 Enabling Y our Multi-T ouch Desktop Display Windows® 7 USB Compatibility 3M multi-touch technology works seamlessly with the Windows® 7 operating system.
20 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Installing 3M™ MicroTouch™ Software Remember that Windows® 7 does not require any additional software to enable multi- touch functionality.
3M™ Multi-Touch Desktop Display User Guide 21 3M Touch Systems, Inc. Proprietary Information – TSD-40532C If you are using 3M™ MicroTouch™ MT 7 Software, launch the MT 7 Control Panel and follow the instructions on the Main tab. You'll be asked to touch 3 targets.
22 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C APPENDIX A 3M™ PX Controller Communications This appendix is intended for software developers only and discusses the fundamentals of communicating with the PX controller.
3M™ Multi-Touch Desktop Display User Guide 23 3M Touch Systems, Inc. Proprietary Information – TSD-40532C You need to know product ID and the vendor ID to write your own driver. These values are required for identifying the controller. Call 3M Touch Systems for more details.
24 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Table 2. Calibration Setup Stage Offset Field Size Value Description 0 bmRequestType 1 0x2.
3M™ Multi-Touch Desktop Display User Guide 25 3M Touch Systems, Inc. Proprietary Information – TSD-40532C The Calibrate Extended command then positions the first calibration target inward from the lower left corner (0,1049) and the sec ond calibration target inward from the upper right corner (1679,0).
26 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C POC Status – The status of the Power-on Checks. Various controller systems are checked at power-up. If any failures in these sy stems are detected, a POC flag is set.
3M™ Multi-Touch Desktop Display User Guide 27 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Table 10. Data Stage (controller response) Offset Field Size Value Description 0 Report ID 1 0x12 Feature Report ID 1 Max Count 1 0x1E Number of actual fingers supported Note: The number of actual contacts reported may exceed this number.
28 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Table 13. Restore Defaults -- Setup Stage Offset Field Size Value Description 0 bmRequestT.
3M™ Multi-Touch Desktop Display User Guide 29 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Offset Field Size Value Description 51 Touch Report 10 See table 16 Touch Report Structure 61 Actual Count 1 1 to 60 Number of valid touch reports 62 Not used 1 0 63 Not used 1 0 Table 16.
30 3M™ Multi-Touch Desktop Display User Guide 3M Touch Systems, Inc. Proprietary Information – TSD-40532C APPENDIX B Regulatory Information Regulatory Agency Approvals Your product complies with t.
3M™ Multi-Touch Desktop Display User Guide 31 3M Touch Systems, Inc. Proprietary Information – TSD-40532C Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
An important point after buying a device 3M M1866PW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M M1866PW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M M1866PW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M M1866PW you will learn all the available features of the product, as well as information on its operation. The information that you get 3M M1866PW will certainly help you make a decision on the purchase.
If you already are a holder of 3M M1866PW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M M1866PW.
However, one of the most important roles played by the user manual is to help in solving problems with 3M M1866PW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M M1866PW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
