Instruction/ maintenance manual of the product IM01005012E Eaton
Go to page of 12
Effective Date 2/2007 For more information visit: www .itvss.com Contents Page 1 Introduction ............................................................................. 1 1.1 Scope ...................................................................
IM01005012E XT -40 & IT -RSS Inst allation Page A Rev . 1 – 2/2007 Register Your Warranty On-Line at http://www.itvss.com/ Notice: Product improvements and enhancements are continuous; therefore the specifications and info rmati on contained in this document may change without notice.
XT -40 & IT -RSS Inst allation IM01005012E Rev . 1 – 2/2007 Page 1 1 I NTRODUCTION 1.1 Scope This installation manual contains the inf ormation necessary to install Eaton Corporation’s XT-40 and IT-RSS Surge Protective Devices (SPDs). System wiring and vol tage information for these devices are provided in Sections 1.
IM01005012E XT -40 & IT -RSS Inst allation Page 2 Rev . 1 – 2/2007 1.4 Safety Precautions A licensed/qualified electrician must complete all instructions and measurement s described in this instruction in accordance with the U.S. National Electrical Code, stat e and local codes, or oth er applicable country codes.
XT -40 & IT -RSS Inst allation IM01005012E Rev . 1 – 2/2007 Page 3 2 I NST ALLA TION 2.1 Before Inst allation Perform or plan the following before installing the SPD: 1. Locate your electrical system ’s appli cab le wiring diagram in Sections 2.
IM01005012E XT -40 & IT -RSS Inst allation Page 4 Rev . 1 – 2/2007 2.2 XT -40 W iring Diagrams Single Phase (1P101, 1P201) CIRCUI T INTE RRUPT DEVICE PHASE A GROUND NETURA L or PHASE B Us e Inte.
XT -40 & IT -RSS Inst allation IM01005012E Rev . 1 – 2/2007 Page 5 2.3 IT -RSS W iring Diagram Split Phase – 288 Vac Phase to Phase Max. IT -RSS CIRCUI T INTE RRUP T DEV ICE PHASE A GROU ND PHASE B 2.
IM01005012E XT -40 & IT -RSS Inst allation Page 6 Rev . 1 – 2/2007 2.5 Conduit Inst allation When planning the conduit installatio n, avoid usin g 90° elbows and keep the conduit run a s sh ort and straight as possible.
XT -40 & IT -RSS Inst allation IM01005012E Rev . 1 – 2/2007 Page 7 Figure 2-2. XT-40 & IT-RSS Mounting Dimensions 2.40 (61.0) 1.77 (45.0) 3.15 (80.0) 2.4 8 (63.0) 4.1 7 (105.9) 3.2 3 (82.0) 4.73 (120.1) 5.5 8 (141.7) 4.80 (121.9) 3.15 (80.0) 0.
IM01005012E XT -40 & IT -RSS Inst allation Page 8 Rev . 1 – 2/2007 2.8 Power Up and System Checkout Apply system power and observe that the LED(s) on the front of the SPD should glow.
XT -40 & IT -RSS Inst allation IM01005012E Rev . 1 – 2/2007 Page 9 Notes:.
Eaton Corporation 1000 Cherrington Park way Moon Township, PA 15108-4312 USA http://www.itvss.com © 2007 Eaton Corporation For additional information please call: All Rights Reserved Power Quality Technical Support Center Publication No. IM0100501 2E 1-800-809-2772 Rev.
An important point after buying a device Eaton IM01005012E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eaton IM01005012E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eaton IM01005012E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eaton IM01005012E you will learn all the available features of the product, as well as information on its operation. The information that you get Eaton IM01005012E will certainly help you make a decision on the purchase.
If you already are a holder of Eaton IM01005012E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eaton IM01005012E.
However, one of the most important roles played by the user manual is to help in solving problems with Eaton IM01005012E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eaton IM01005012E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
