Instruction/ maintenance manual of the product 5SC1000i Eaton
Go to page of 12
ENGLISH Copyright © 2013 EATON All rights reserved. Service and support: Call your local service representative 619-00470-01-i (en) 5SC 500i 5SC 750i 5SC 1000i 5SC 1500i Installation and user manual.
Page 2 61 9-00470-0 1 -i (en) Cer tication Standards Special S ymbols The following are examples of symbols used on the UPS or accessories to aler t you to impor tant information: RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol.
Page 3 61 9-00470-0 1-i (en) ENGLISH Contents 1 . Introduction ....................................................................................... 4 1 .1 Environmental protection ....................................................................
Page 4 61 9-00470-0 1-i (en) 1. Introduction Thank you for selecting an EA TON product to protect your electrical equipment. The 5SC range has been designed with the utmost care. W e recommend that you tak e the time to read this manual to take full advantage of the many features of your UPS (Uninterruptible P ower System).
Page 5 61 9-00470-0 1-i (en) ENGLISH 2. Presentation 2.1 Standar d installation D H W Description Weights (kg/ lb ) Dimensions (mm/ inch ) D x W x H 5SC 500i 6.60 / 14.60 240 x 150 x 210 / 9.4 x 5.9 x 8.3 5SC 750i 10.40 / 22.90 340 x 150 x 210 / 13.4 x 5.
Page 6 61 9-00470-0 1-i (en) 2. Presentation 2.3 Contr ol panel The UPS has a three-button LCD. It provides useful information about the UPS itself , load status, events, measurements and settings. AVR % Min Hz kVA kW 6 7 8 6 ON/OFF button 7 Scroll down 8 Mute alarm 2.
Page 7 61 9-00470-0 1-i (en) ENGLISH 3. Installation 3.1 Unpacking and cont ents check 1 2 3 4 5 6 (1) 5SC UPS (2) Quick start and safety instructions (3) User manual and IPSS (Intelligent Power Softw.
Page 8 61 9-00470-0 1-i (en) 3. Installation 3.2 Communication por ts Connection of RS232 or USB communication por t The RS232 and USB communication ports cannot operate simultaneously. 2 1 5 6 1. Connect the RS232 (5) or USB (6) communication cable to the serial or USB port on the computer equipment.
Page 9 61 9-00470-0 1-i (en) ENGLISH 4. Operation 4.1 Star t-up and Nor mal operation T o start the UPS: 1. V erify that the UPS power cord is plugged in. 2. Press the button on the UPS front panel for at least 2 seconds. 3. Check the UPS front panel display for active alarms.
Page 10 61 9-00470-0 1-i (en) 5. Maintenance 5.1 T roubleshooting Operation status Possible cause Action Overload Power requirement exceeds the UPS capacity (greater than 105 % of nominal). Remove some of the equipment from the UPS.The UPS continues to operate, but may shutdown if the load increases.
Page 11 61 9-00470-0 1-i (en) ENGLISH 5. Maintenance 5.2 Bat tery -module replacement Saf ety recommendations The battery can cause electrocution and high short-circuit cur rents.
Page 12 61 9-00470-0 1-i (en) 6. Appendices 6.1 T echnical specications 5SC 500i 5SC 750i 5SC 1000i 5SC 1500i Output Power @ 230 V 500 VA 350 W 750 VA 525 W 1000 VA 700 W 1500 VA 1050 W AC Input po.
An important point after buying a device Eaton 5SC1000i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eaton 5SC1000i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eaton 5SC1000i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eaton 5SC1000i you will learn all the available features of the product, as well as information on its operation. The information that you get Eaton 5SC1000i will certainly help you make a decision on the purchase.
If you already are a holder of Eaton 5SC1000i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eaton 5SC1000i.
However, one of the most important roles played by the user manual is to help in solving problems with Eaton 5SC1000i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eaton 5SC1000i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
