Instruction/ maintenance manual of the product THOR IW--SUB10 Earthquake Sound
Go to page of 12
Earthquake Sound Corp. | (510) 732-1000 | U.S. T oll Free: (800) 576-7944 | www .earthquakesound.com In-W all 10” Subwoofer with 10” SLAPS User Manual Model: THOR IW—SUB10.
T able of Contents Customer Support tech@earthquakesound.com T el: 800-576-7944 Fax: 510-732-1095 The Sound That Will Move Y ou Earthquake Sound Corporation 2727 McCone Avenue Hayward, CA 94545 T el: 510-732-1000 Fax: 510-732-1095 © 2010 Earthquake Sound Corporation.
T able of Contents Customer Support tech@earthquakesound.com T el: 800-576-7944 Fax: 510-732-1095 The Sound That Will Move Y ou Earthquake Sound Corporation 2727 McCone Avenue Hayward, CA 94545 T el: 510-732-1000 Fax: 510-732-1095 © 2010 Earthquake Sound Corporation.
• Be sure the THOR is installed by an Earthquake authorized installer • Do not attempt to perform the following steps without a professional (Any product installed by an unauthorized installer is .
• Be sure the THOR is installed by an Earthquake authorized installer • Do not attempt to perform the following steps without a professional (Any product installed by an unauthorized installer is .
T aking Off THOR’ s Grille STEP#1 Y our are now ready to prepare the sub for installation. Carefully remove the logo from the grille to expose the fastener hex nut. Using the provided allen wrench, remove the fastener nut. Make sure you perform these steps before trying to remove the grille (you will damage the grille otherwise).
T aking Off THOR’ s Grille STEP#1 Y our are now ready to prepare the sub for installation. Carefully remove the logo from the grille to expose the fastener hex nut. Using the provided allen wrench, remove the fastener nut. Make sure you perform these steps before trying to remove the grille (you will damage the grille otherwise).
Installing Y our THOR T o begin you will need to locate the empty grille frame. Use your stud finder to locate the studs (if you’re not retrofitting). Using the empty frame, trace your cut line with a pencil. Once you are satisfied with your cut line, begin your cut using the sheet rock saw .
Installing Y our THOR T o begin you will need to locate the empty grille frame. Use your stud finder to locate the studs (if you’re not retrofitting). Using the empty frame, trace your cut line with a pencil. Once you are satisfied with your cut line, begin your cut using the sheet rock saw .
STEP#4 Wrap cloth around frame and put into place with provided security ring. STEP#5 Once you have the cloth in place with security ring push the ring enough to keep in place, though the groove with cloth underneath. STEP#6 Now that you have pressed the security ring in by hand, use your rubber mallet to finish securing it completely in the gap.
STEP#4 Wrap cloth around frame and put into place with provided security ring. STEP#5 Once you have the cloth in place with security ring push the ring enough to keep in place, though the groove with cloth underneath. STEP#6 Now that you have pressed the security ring in by hand, use your rubber mallet to finish securing it completely in the gap.
Sound That Will Move Y ou Earthquake Sound reserves the right to amend details of the specifications without notice. © Copy right E arthqu ake Sou nd Corp oratio n Earthquake Sound Corporation 2727 McCone Avenue, Hayward CA, 94545 Phone: (510) 732-1000 U.
An important point after buying a device Earthquake Sound THOR IW--SUB10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Earthquake Sound THOR IW--SUB10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Earthquake Sound THOR IW--SUB10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Earthquake Sound THOR IW--SUB10 you will learn all the available features of the product, as well as information on its operation. The information that you get Earthquake Sound THOR IW--SUB10 will certainly help you make a decision on the purchase.
If you already are a holder of Earthquake Sound THOR IW--SUB10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Earthquake Sound THOR IW--SUB10.
However, one of the most important roles played by the user manual is to help in solving problems with Earthquake Sound THOR IW--SUB10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Earthquake Sound THOR IW--SUB10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
