Instruction/ maintenance manual of the product 6900 Earlex
Go to page of 8
OPERA TING INSTRUCTION MANUAL Thank you for purchasing the Professional Earlex low pressure paint system. This highly versatile (high volume of air , low pressure painting) system can be used for a wide variey of applications. BEFORE USE - PLEASE READ THE MANUAL AND SAFETY INSTRUCTIONS.
• Never under any circumstances aim the Spray Gun at another person or animal. In the event of injury occurring seek expert medical advice immediately . • The Spray Gun must only be used with paints and solvents that have a flash point suitable for spraying.
Mains Switch (230V) Power IN (IEC Connector) Circuit Breaker 1 2 3 4 5 6 7 8 9 10 1 1 12 7 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 (x2) EXPLODED P ARTS VIEW P ARTS LIST 3 No. Description Part No. 1. Air Cap Ring L0151 2. Air Cap N0517 3. Air Direction Plate L0162 4.
The concept A motor feeds out a high volume of air (HV) and enables products to be sprayed at a low pressure (LP). The product is released from the Fluid Tip of the Spray Gun at a very low pressure (0.18 bar) and is enclosed in a high volume of air . The Hose feeds the air produced by the motor to the Spray Gun.
The most commonly used technique for painting a wall is the ‘crisscross’ technique, i.e. you apply the product in horizontal lines and then cross over these lines by applying the product in vertical lines; (Fig. 3) V ertical Spray Horizontal Spray Round Spray Fig.
T ype of paint Cleaning W ater based paint Clean with water Oiled based paint Clean with white spirit Removing the Fluid T ip and Fluid Needle assembly (for cleaning or switching to a smaller/larger diameter). CLEANING SPRA Y GUN 6 Flush out the residue paint from the spray gun, as follows: l Remove the paint container (25) from the spray gun.
CAUSE ACTION REQUIRED Paint too diluted Add undiluted paint Paint output too high Reduce the paint output by adjusting the Fluid Adjusting Screw (12) Moving too slowly Increase speed of application Sp.
PLEASE NOTE: We have done all we can to ensure that when used correctly and in accordance with these instructions the spray gun has a long and fault-free life.
An important point after buying a device Earlex 6900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Earlex 6900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Earlex 6900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Earlex 6900 you will learn all the available features of the product, as well as information on its operation. The information that you get Earlex 6900 will certainly help you make a decision on the purchase.
If you already are a holder of Earlex 6900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Earlex 6900.
However, one of the most important roles played by the user manual is to help in solving problems with Earlex 6900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Earlex 6900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
