Instruction/ maintenance manual of the product XS-DS70 Aiwa
Go to page of 25
Compact Disc Stereo System En (English) E (Español) F (Français) OPERA TING INSTRUCTIONS MODE D'EMPLOI MANUAL DE INSTRUCCIONES For assistance and information (United States and Puerto Rico) 8B-.
2 En PRECAUTIONS W ARNING T o reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 En T ABLE OF CONTENTS PRECAUTIONS .................................... 2 PREP ARA TIONS ................................... 4 PAR TS AND CONTROLS ......................... 7 ADJUSTMENTS BEFORE OPERA TIONS ...... 10 CD OPERA TIONS ...................
4 En PREP ARA TIONS Connection Plug in the AC power cord to the AC power outlet after all other connections are made. Surround speaker Surround speaker Center speaker DVD player etc.
5 En 1 Connect the speaker cords to the front speakers, surround speakers and center speaker . For the front speakers (marked "FRONT"), connect the ends of the stripe cords to the 0 terminal and the ends of the other cords to the 9 terminal with the front speakers cords (without a plug, approx.
6 En If the video equipment does not have a digital out jack; Connect the AUDIO OUT jacks of the video equipment to the VIDEO/AUX jacks of this unit with an optional audio connecting cord with RCA phono plugs (red plug to the R jack, white plug to the L jack).
7 En P ARTS AND CONTROLS Main unit: rear 1 AM LOOP , FM 75 Ω terminals Plug in the supplied AM and FM antennas here. 2 DIGIT AL IN (PCM/DOLBY DIGIT AL) OPTICAL (VIDEO) jack Accepts Dolby Digital signals as well as PCM signals (conventional digital audio signals, used, for example, in audio CDs) from external digital equipment.
8 En 1 PO WER 6 ST ANDBY/ON Switches the unit on and off (standby). DEMO/ECO When the unit is turned off: switches DEMO on and off. When the unit is turned on: enters ECO setting mode. 2 NORMAL Selects NORMAL mode for Dolby Surround. PHANT OM Selects PHANTOM mode for Dolby Surround.
9 En Buttons with same or similar names with the main unit basically have the same function. 1 WINDO W DOWN WINDO W UP REMAIN Displays the remaining playback time of a CD when pressed during playback. PRGM Enters programmed CD playback mode. TIMER Enters timer setting mode.
10 En ADJUSTMENTS BEFORE OPERA TIONS Power T urning the unit on Press POWER 6 ST ANDBY/ON (POWER on the remote control). Or press FM, AM, VIDEO/AUX/DVD or CD, the playback will start automatically if a disc or tape is inserted. T urning the unit off Press POWER 6 ST ANDBY/ON again.
11 En ECO mode Reduces power consumption with the following operations, etc. ECO ON mode - The unit blacks out when the unit is turned off. Only the red indicator lights up.
12 En This unit plays back finalized CD-R/RW discs as well as audio CDs. * Move the Window up to reveal the operation buttons with WINDOW UP if needed. Playback 1 Press CD and load disc(s) Press z CD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labeled side up.
13 En Programmed playback Plays back up to 30 selected tracks in programmed order . 1 Press PRGM on the remote control during stop. " PRGM " lights up on the display . 2 Press DISC DIRECT PLA Y 1-3 to select a disc. Go to the next step when the tray stops rotating.
14 En RADIO OPERA TIONS * Move the Window up to reveal the operation buttons with WINDOW UP if needed. Manual tuning 1 Press FM or AM (TUNER/BAND on the remote control) to select a band (FM or AM). The unit switches to the radio from any other function.
15 En Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. FM antenna: Extend fully in a T -shape. If receiving condition is poor , connect optional outdoor antenna to FM 75 Ω terminal. Be sure to connect the shield braid of the antenna to the 2 terminal.
16 En LISTENING TO EXTERNAL SOURCES * Move the Window up to reveal the operation buttons with WINDOW UP if needed. Playing a digital source (Playing equipment connected to the DIGIT AL IN (PCM/DOLBY DIGIT AL) OPTICAL (VIDEO) jack) 1 Select digital input.
17 En Notes on Dolby Surround • Dolby Digital sound and Dolby Pro Logic sound can only be obtained when playing back software with their respective logos. • Make sure all the supplied speakers are placed and connected properly (see "Positioning the speakers").
18 En Subwoofer On or Off mode If you connect a subwoofer to this unit, change the Subwoofer mode to "S-W ON". Low-frequency effect signals are sent to the subwoofer . In "S-W OFF", low-frequency effect signals are directed to the other speakers.
19 En • Y ou cannot adjust the surround speaker level for LS and RS channels separately . T o do that, see "T o adjust the speaker level without the test signal".
20 En SOUND ADJUSTMENTS Sup er T -BASS Emphasizes low frequencies for a powerful sound. 1 Press SOUND MODE once so that " T -BASS " is displayed. 2 T urn MUL TI JOG to select one of the three emphasis levels or the off position and then press ENTER.
21 En TIMER OPERA TIONS * Move the Window up to reveal the operation buttons with WINDOW UP if needed. Sleep timer T urns off the unit automatically after a specified time. 1 Press SLEEP on the remote control. " SLP " appears on the display .
22 En T o display the timer setting Press TIMER on the remote control repeatedly until " PLAY " is displayed. The timer -on time, the source and the timer -activated duration are displayed for 6 seconds.
23 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. T o clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
24 En Specifications MAIN UNIT CX-GDS70 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 13.2 dBf FM antenna terminals 75 ohms (unbalanced) AM tuning range 530 kHz to 1710 kHz (10.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device Aiwa XS-DS70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa XS-DS70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa XS-DS70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa XS-DS70 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa XS-DS70 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa XS-DS70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa XS-DS70.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa XS-DS70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa XS-DS70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
