Instruction/ maintenance manual of the product XR-MN5 Aiwa
Go to page of 26
Micro Hi-Fi Component System 4-246-022-21 030227AMI-H-FM XR-MN5.
2 En W ARNING The following caution label is located inside the apparatus. PRECAUTIONS On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply .
3 En TA BLE OF CONTENTS PRECAUTIONS .................................... 2 PREP ARA TIONS ................................... 4 PA R TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TION .......... 8 SOUND ADJUSTMENTS .............
4 En Remote commander Detach the battery compartment lid at the rear of the remote commander and insert two R6 (size AA) batteries with correct polarity . R6(AA) • Replace the batteries with new ones when the operational distance between the remote commander and main unit becomes shorter .
5 En PA RTS AND CONTROLS Main unit: front Refer to the pages indicated in parentheses for details. 1 4 5 2 3 6 7 8 9 0 1 POWER 6 ST ANDBY/ON (8) Switches the unit on and off (standby). 2 E CD (8, 10-12) Starts and pauses CD play . TUNER/BAND (8, 14) Selects tuner function and the tuner band.
6 En Main unit: rear Refer to the pages indicated in parentheses for details. 1 3 2 4 5 6 1 AM LOOP jack and FM 75 Ω terminal (4) Plug in the supplied AM and FM antennas. 2 SUB WOOFER 3 jack Connect optional powered sub woofer with a built-in amplifier to the jack.
7 En Remote commander Refer to the pages indicated in parentheses for details. 1 4 5 6 7 9 8 ! @ # 0 2 3 Buttons with the same or similar names on the main unit basically have the same function. 1 POWER (8) 2 1–10/0, >10 (10-12, 15, 19, 20) CD: selects a track of the specified number .
8 En ADJUSTMENTS BEFORE OPERA TION ECO/RDS CLOCK POWER DIMMER SHIFT E CD , TUNER/ BAND , d T APE, AU X f , g POWER 6 ST ANDBY/ON E CD , TUNER/ BAND , d TA PE, AU X ENTER f , g ECO mode Reduces power consumption in standby mode with the following operations.
9 En SOUND ADJUSTMENTS V olume Tu rn VOLUME (press VOLUME + , - on the remote). Adjust from 0 (minimum) to 33 and MAX (maximum). Muting Hold down SHIFT and press MUTING on the remote. Playback continues without sound and " MUTING " appears in the display .
10 En CD OPERA TIONS Notes • Do not insert 8-cm (3-inch) discs. Those discs cannot be played on this unit. Moreover , if you insert the disc of that size forcibly , you may not be able to eject it. • Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit.
11 En Shuffle play In shuffle play mode the unit plays all the tracks on the disc inserted in random order . 1 In stop mode, press SHUFFLE/PROGRAM on the remote repeatedly until the " SHUF " indicator is displayed. 2 Press E CD to start play .
12 En MP3-CD OPERA TIONS Playback This unit plays back MP3-CDs: discs recorded with MP3 tracks (files). Basic operations for MP3-CDs are mostly the same as those in "CD OPERA TIONS". Before playing an MP3-CD, also refer to "Descriptions of MP3" for the details of MP3.
13 En Descriptions of MP3 An MP3 file stores audio data compressed using MPEG1/2, the audio layer -3 file-coding scheme. In this manual, CDs, CD-R discs and CD-RW discs are all r eferred to as "discs". We refer to what are called "folder" and "file" in PC terminology as "album" and "track".
14 En TUNER OPERA TIONS Manual tuning 1 Press TUNER/BAND repeatedly to select a band. The unit switches to the tuner from any other function and alternates between FM and AM. 2 Press f or g repeatedly to tune in a station. " TUNE " is displayed when a station is tuned in.
15 En RDS features RDS (Radio Data System) is a broadcasting service which allows FM stations to send additional information along with the regular radio signal.
16 En PTY Search The unit can search for a station broadcasting your desired PTY easily . To do so, you need to preset every available station in advance since the unit searches only the preset stations. 1 Press ECO/RDS repeatedly until the program type of the currentry tuned station is displayed.
17 En T APE PLA YBACK Playback Use only type I (normal) tapes. 1 Press PUSH EJECT z to open the cassette holder . 2 Insert the tape. Insert with the exposed side down, and press PUSH EJECT z to close the cassette holder . 3 Press d T APE (REC MUTING) ( d T APE) to start play .
18 En 5 Press SYNCHRO REC. The unit enters the recording pause mode, and " REC " indicator flashes on the display . 6 Press REC ST ART/REC P AUSE to start recording. " REC MUTING " flashes in the display for 10 seconds and recording starts.
19 En To record a 4-second blank space (only for TUNER or AUX source) Inserting 4-second blank spaces may help you locate the beginning of the track on other equipment with the "Music Sensor" function. 1P ress d T APE (REC MUTING) on the unit during recording or in recording pause mode.
20 En Programmed Edit Recording As you program the CD tracks to record, Programmed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape. •R ecording cannot start from a point halfway in the tape.
21 En TIMER OPERA TIONS POWER 6 ST ANDBY/ON f , g TIMER POWER SLEEP SHIFT f , g ENTER CLEAR Sleep timer Tu r ns off the unit automatically after a specified time. Press SLEEP on the remote. " SLEEP " flashes in the display . With each press, the timer duration changes as follows: AUTO 10.
22 En Ti mer recording Timer recording is available only for TUNER sources. 1 Prepare the recording destination. Insert the recordable tape in tape deck. 2 Hold down SHIFT and press REV MODE on the remote to select a reverse mode. To record on one side only , select p .
23 En T roubleshooting If your unit fails to perform properly , check the following guide and the relevant sections of the Operating Instructions. First check that the AC power cord and the speakers are connected cor r ectly and fir mly . Should any problem persist, consult your nearest Aiwa dealer .
24 En Resetting the unit If an unusual condition occurs in the display window or the cassette deck, reset the unit as follows: 1P ress POWER to turn off the power . If the power cannot be turned off, disconnect the AC power cord, then plug it in again.
En 25 Specifications MAIN UNIT CX-LMN5 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 16.8 dBf FM antenna terminal 75 Ω (unbalanced) AM tuning range 531 kHz to 1602 kHz AM usable sensitivity 350 µV/m AM antenna Loop antenna AMPLIFIER Power output Rated: 64 W + 64 W (6 Ω, T .
Sony Corporation Printed in China http://www .aiwa.com.
An important point after buying a device Aiwa XR-MN5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa XR-MN5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa XR-MN5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa XR-MN5 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa XR-MN5 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa XR-MN5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa XR-MN5.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa XR-MN5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa XR-MN5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
