Instruction/ maintenance manual of the product DCo7 Dyson
Go to page of 8
Please read this guide carefully before use. User guide 6057-DCO7 OPS MAN (UPDATE) 10/23/01 12:26 PM Page 1.
Assembling DCO7 1 Slide hose into runners at back of machine and push down until it clicks. 2 Press wand release button and slide wand down into hose. DCO7 Hose Wand cap Upper cable winder Wand Wand r.
Using your DCO7 Plug in at mains and press on/off switch. T o start vacuuming, push cleaner head down with foot and pull handle towards you. Ensure machine is in upright position before using tools. Press wand release catch 1 to release ready-to-go hose and slide wand to end of hose.
Where to look for blockages Check that tools are clear of blockages. Remove bin assembly from machine. Remove wand and check inside for blockages. Press hose release button A from front of machine and slide hose out with lower cable winder from rear .
W ashing the lifetime pre -motor filter Press filter release catch and remove filter housing from machine. Filter should be washed every six months. Circle your two washes. Remove filter from housing. Only blue foam and yellow cage should be washed. Wash in cold water only .
Clean shroud with a cloth or dry brush to remove fluff and debris. T o replace bin, first click rear bin catch 1 and then front bin release catch 2 into place. Ensure bin base is closed securely and replace bin assembly on to machine. Option 2 A Empty directly into dustbin.
Changing/fitting your belt (Silver/yellow model only) 1 Recommended postion for changing the belt, with wand removed. 2 Undo fasteners using a coin and remove soleplate. 3 Remove any debris and check spindle is clean. 4 T o replace the belt - remove brushbar , loop belt around brushbar and feed through hole.
UK 08705 275 104 T etbury Hill, Malmesbury, Wilts SN16 0RP . 7 days a week 8am - 8pm e-mail: service@dyson.com IRL (01) 475 7109 Unit 2, Baldonneu Business Park, Naas Road, Co Dublin. Visit the Dyson website for product information and to order accessories and spares.
An important point after buying a device Dyson DCo7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dyson DCo7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dyson DCo7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dyson DCo7 you will learn all the available features of the product, as well as information on its operation. The information that you get Dyson DCo7 will certainly help you make a decision on the purchase.
If you already are a holder of Dyson DCo7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dyson DCo7.
However, one of the most important roles played by the user manual is to help in solving problems with Dyson DCo7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dyson DCo7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
