Instruction/ maintenance manual of the product CRO2 Dyson
Go to page of 24
This user guide also contains tips on effective washing and important safety notes. Please read this user guide carefully before use. User guide www .dyson.
8887_CRO2_OPS_COVERS.qxd 5/11/03 3:24 pm Page 4.
Contents Overview of your Dyson washing machine The only 2-drum wash action F ree registration Important safety notes Inner transit packaging removal Moving the washing machine Specification L ocation.
Overview of your Dyson washing machine 1 01 Overview Outer door Control panel Soap tray Hot water inlet Cold water inlet Drainage hose hook P ower cable & plug & Inner door Rating plate Adjust.
The only 2-drum wash action. Contrarotator TM Conventional washing machines may seem convenient, but their poor performance lets you down. So James Dyson asked his engineers to experiment with every imaginable way of washing to design a better washing machine.
Always: • ensure that the feet are screwed into cabinet before using the Rollerjack TM to move the machine. Care should be taken when moving it, as it is very heavy . • turn off the machine with the ‘Mains on/off ’ button and switch off at the socket when not in use.
7 Using the Dyson spanner remove the four bolts securing the top transit bracket. 8 Remove the four screws securing the bracket to the machine casing and lift out the transit bracket. • Refit the lid and two screws. To replace the packaging eg: for moving house , reverse the procedure described above.
600 mm MAX. 450 mm MIN. 848 mm 595mm Dimensions Height 848mm Depth 575mm Width 595mm W eight: 103kg. V oltage: 220-240V , 50Hz. Please refer to rating plate (see section 01 for location). P ower: 2750W 230V . Please refer to rating plate (see section 01 for location).
W ater supply Drainage Installation • Connect your machine to the water supply by hand, using the hoses supplied. Only tighten by hand, do not use a spanner . Do not use old hoses. • Ensure the water pressure is between 0.4 and 5 bar . Do not: • connect the machine to a mixer tap.
When all the instructions on the previous pages have been completed, the machine can be installed into its operating position using the Rollerjack TM handle (see section 01). • Using the Dyson spanner , adjust the two front feet so that the machine is perfectly stable and is touching the ground on all four corners and cannot rock.
Operation 6 01 • Ensure the machine is plugged into the mains and switched on at the socket. Check that the water supply is on at the mains. • Open the outer and inner doors. • Check the drums are empty before placing the sorted laundry into the washing machine.
1 2 Switch on the machine Select the programme Select Cotton/Synthetics/W ool/ Delicate/Handwash items or Duvet cycle. T emperature, spin and soil type settings will automatically adjust to the default settings to give the best options for the selected wash.
End of wash cycle The display will show ‘Programme finished’ once the cycle is complete. Remove the washing and turn off the machine by pressing the ‘Mains on/off ’ button.
8 01 Optional settings To personalise the default wash programmes Adjust your programme After selecting the fabric type, press the temperature, spin and soil type buttons to scroll through the options and select your preferred settings. Note: on certain programmes some options are not available (see section 02) .
Start delay Selected models only This allows you to programme the wash to finish when you want it to. Use the and arrows to adjust the settings eg: if you want the wash to start in 10 hours time, press the arrow 10 times and press ‘Start’ to activate it.
F abric care and advice 9 01 W ash tips Do not: • wash frayed or torn fabrics. •w ash items unsuitable for washing machines e.g. trainers, shoes or rucksacks. Always: Care label • check the wash care label on laundry to select the most appropriate programme.
9 02 P rogramme table Care label Suggested program me T emperature Spin speed Soil type Options Maximum load Cotton 100% cottons Linen Synthetics Cotton mixes Mixed fibre P olycottons F abrics with sp.
Self clean cycle (on selected models only) Cleaning Maintenance • The soap tray cavity in the machine should be cleaned out with a small, soft brush, taking care not to dislodge the rubber seal. • Replace the soap tray ensuring it ‘clicks’ into place.
Coin trap Maintenance 5 Remove any objects from the coin trap. 6 If any more items seem to be blocking the coin trap, pull out the flow accelerator cap. • Remove any items and firmly push the flow accelerator cap back into place. To replace the coin trap window: • Ensuring the seal is in place, lubricate with a drop of washing up liquid.
Machi “Not emptying: check ho Emergency door release W ater filter Maintenance This should be used in the event of a power cut to remove laundry . • Switch off and remove the plug from the socket. • Ensure the drums have stopped moving. • If the machine has been running on a hot wash, leave it to cool down.
11 01 T roubleshooting LCD display is blank Machine displays “ Overload reduced performance” Machine displays “Close inner door then press start” Certain spin speeds, temperatures, dirt levels.
Ensure the machine is plugged in and switched on. Check the fuse and also that the circuit breaker has not tripped. (See section 02) for the programme options wash table. Wa it for the machine to finish the cycle before opening the door . T o cancel the wash hold down the ‘Cancel’ button.
11 03 T roubleshooting Child lock on Overload reduced performance Uneven load could not spin Close outer door then press start Close inner door then press start Not emptying: check hose and coin trap Not filling: check water supply Fault The child lock has not been deactivated.
For Dyson, call Dyson Made & T ested by Dyson Dyson Call Centre Helpline 8 till 8, every day UK 08705 275104 ROI ( 01 ) 475 7109 service@ dyson .co.uk www . dyson .com Dyson Ltd T etbury Hill Malmesbury Wiltshire SN16 ORP JN.8887 30.10.03 PN .50351-04-01 GENUINE COMPONENTS 8887_CRO2_OPS_COVERS.
An important point after buying a device Dyson CRO2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dyson CRO2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dyson CRO2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dyson CRO2 you will learn all the available features of the product, as well as information on its operation. The information that you get Dyson CRO2 will certainly help you make a decision on the purchase.
If you already are a holder of Dyson CRO2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dyson CRO2.
However, one of the most important roles played by the user manual is to help in solving problems with Dyson CRO2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dyson CRO2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
