Instruction/ maintenance manual of the product DX-PS10CC Dynex
Go to page of 2
Setting up the shredder 1 Place the shr edder head securely on the rim of the supplied wastebasket. Caution : Crosscut shr edders have very sharp, exposed blades on the underside. Use care when mounting the shredder to the wastebasket. Note : Do not use plastic bags to line the wastebasket.
Specications T roubleshooting • If a jam occurs and the cutter stops, slide the pow er button to REV and pull out the jammed paper . • If paper is jammed in the shredder blades, slide the pow er button to OFF , unplug the power cor d, and remo ve all paper from the entrance and exit of the paper or disc slot.
An important point after buying a device Dynex DX-PS10CC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynex DX-PS10CC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynex DX-PS10CC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynex DX-PS10CC you will learn all the available features of the product, as well as information on its operation. The information that you get Dynex DX-PS10CC will certainly help you make a decision on the purchase.
If you already are a holder of Dynex DX-PS10CC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynex DX-PS10CC.
However, one of the most important roles played by the user manual is to help in solving problems with Dynex DX-PS10CC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynex DX-PS10CC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
