Instruction/ maintenance manual of the product dx-drtvm102 Dynex
Go to page of 16
Safety info rmation and specifications ............... 2 T V s the wall mount fits ............................................ 3 T ools needed ............................................................... 4 P arts ..................................
2 Need help? Call 800-305-2204 Safety informa tion and specifications IMPORT ANT SAFETY INSTRUCTIONS - SA VE THESE INSTRUC TIONS CA UTION: Do not use this product for an y purpose not explicitly specified by Dynex. Improper installat ion may cause pr operty damage or personal inj ury.
3 Need help? Call 800-305-2204 T V s the wall mount fits The wall mount fits T V s with M4, M5, or M6 scr ew holes that are the follo wing distances apar t: 13.8" (35 cm) maximum horizontal distance 9.1" (23 cm) vertical distance DX-DRTVM102_12-1058_MAN _V3_ENG.
4 Need help? Call 800-305-2204 Parts T ools needed Y ou will need the f ollowing tools t o assemble your new wa ll mount: Edge-to -edge stud finder Pencil T ape measure Hammer Leve l Phillips screwdriver Socket wrench with 1/2" (13 mm) socket or adjustable wrench Drill 7/32" (5.
5 Need help? Call 800-305-2204 P ackage contents Make sure you ha ve all the parts necessar y to assemble your new T V wall mount: A Wa l l P l a te ( 1 ) B Lef t T V Br ack et ( 1) C Right T V Bracket (1) R W all Plate T emplate (1) Hardware T V Hard ware Ba g Note: Not all hardware will be used.
6 Need help? Call 800-305-2204 Assembly instructions Step 1: Determine the wall-mount location. Note: F or help with determining where you need to drill screw holes, use the H eightF inder™ Installation Assistant at: http://mf1.bestbuy .selectionassist ant.
7 Need help? Call 800-305-2204 Step 2 - Option 1: Installing on a w ood stud wall Note: Any dry w all cov ering the wall must not exc eed 5/8" (16 mm).
8 Need help? Call 800-305-2204 Step 2 - Option 2: Installing on a solid con cr ete o r co ncr ete blo ck w al l* Note: Mount the wall plat e directly onto the concre te surface. 1 At the wall height you determined in the prev ious step , alig n the wall plate t emplate ( R ) against the wall , make sure that it is leve l, then tape it t o the wall.
9 Need help? Call 800-305-2204 Step 3: Determine whether y our T V has a flat back or an irregular or obstructed back 1 Carefully place y our T V screen face- down on a cushioned, clean surf ace t o protect the screen fr om damages and scratche s. 2 If your T V has a table-top stand attached, r emov e the stand .
10 Need help? Call 800-305-2204 Step 4: Selec t scr ew s and spac ers 1 Select the hardware f or y our T V (screws , washers , and sp acers). See the documentation that cam e with your T V for scr ew length and diameter . A limited number of T V s c ome with mounting h ardwar e included .
11 Need help? Call 800-305-2204 Step 5: Adjusting the tilt Note: The tilt on the left T V bracket ( B ) and right T V br acket ( C ) must be the same. 1 Use a Phil lips screwd rive r to re move th e two tilt scre ws ( S ) from the outside edges of each T V bracket ( B and C ).
12 Need help? Call 800-305-2204 Step 6 - Option 1: Installing on a T V with a flat back 1 Align the holes you noted on the left T V bracket ( B ) and right T V bracket ( C ) with the scr ew holes on the back of your TV . The brackets are marked “R” for the right br acket an d “L ” for the left bracket.
13 Need help? Call 800-305-2204 Step 6- Option 2: Installing on a T V with an irregular or obstructed back 1 Place the spacers ( P or Q ) over the mounting holes in the back of your T V . 2 If you are using M4 or M5 screws , place M4/M5 washers ( N ) ov er the spacers .
14 Need help? Call 800-305-2204 Step 7: Mount the T V on the wall pla te Lower the T V onto th e wall plate ( A ) making sure that the ho oks on the top of the left an d right T V brackets ( B and C ) slide over the top of the wall plat e ( A ) and the hooks on the bottom of the T V brackets slide under the bottom of the wall plate.
15 Need help? Call 800-305-2204 Removing the T V from the w all plate 1 Grasp the T V b y the bott om edge , th en pull down on the locking cords and pull the bottom of the T V out from the w all. 2 Release the locking cords and lift the top of the T V from the w all bracket.
ww w .dynexproducts.com (800) 305-22 04 Distributed by Best Buy P urchasing, LL C 7601 P enn Av e. South, Richfiel d, MN 55423 U .S.A. © 2013 BB Y Solutions, Inc. All right s reser ved. D YNEX is a trademark of BB Y Solutions, Inc . Regist ered in some countries.
An important point after buying a device Dynex dx-drtvm102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynex dx-drtvm102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynex dx-drtvm102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynex dx-drtvm102 you will learn all the available features of the product, as well as information on its operation. The information that you get Dynex dx-drtvm102 will certainly help you make a decision on the purchase.
If you already are a holder of Dynex dx-drtvm102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynex dx-drtvm102.
However, one of the most important roles played by the user manual is to help in solving problems with Dynex dx-drtvm102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynex dx-drtvm102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
