Instruction/ maintenance manual of the product RTA770W Dynalink
Go to page of 18
Quick Setup Guide RT A770W ADSL R outer/Modem.
Impor tant This Guide is intended to get you started quickly . W e have made the factory default setting of this router suitable for New Zealand 1 . All you need is to follow thr ough the steps we describe here. This Guide should be read in conjunction with the R T A77x Series ADSL Router User’ s Manual 2 .
Default Configuration for New Z ealand This router is shipped with the following factory default settings. Router IP address 192.168.1.1 Subnet mask 255.255.255.0 VPI 0 VCI 10 0 Connect mode PPPoA VC-MUX NA T enabled DSL line mode auto select G.DM T / T1.
Choose from your connection options: 1. Eth erne t (for standalone computer or multiple computers, Operating System independent) The router comes with a built-in 4-port network switch.
Get your computer r eady for networking The description below assumes you ar e connecting the router via Ethernet. If you are connecting the router via USB, r efer to Chapter 2 - U SB Driver Installation on page 4 of the User’ s Manual on CD. Y ou have two options.
Windows 98/ME: 1. From Control Panel , double click Network . Scroll down to highlight TCP/IP - > (your network card) . Click Properties . 2. Select the IP Addr ess tab. Specify 192.168.1 .x (x is a number you pick between 2 and 254 ). This is the IP address you assign to the computer .
STEP 2 ENTER INTERNET ACCOUNT DETAILS Enter your Internet account User Name & Password in the exact format as specified by the ISP . Make sure the page displays "Y our DSL router is r eady to connect" before clicking Connect .
Configuration for PPP oE ser vice Follow this pr ocedure ONL Y if your I SP specifies the service as PPPoE. Caution - do not set your router to PPPoE mode if your ADSL service is PPPoA. It will not connect. Reset to factory default will restor e router to PPPoA mode.
7 Some adv anced functions of your router Firewall, port forwarding, DMZ & traffic r estrictions By default a preset firewall is inv oked to block all incoming requests including Ping from the Internet to your priv ate network. In the reverse direction all r equests sent from your network can freely pass thr ough to the Internet.
ADSL R outer Quick Set-up Guide T o set up IP extension, go to Advanced > Internet . Click on the "modify icon" under Edit: The next screen displays VPI and VCI as 0 and 100. Do not change these numbers. Go Next . Select PPPoA VC MUX or PPPoE LLC/SNAP .
Enter your Internet account user name and password. Go Next . The new configuration is displayed. Click Apply to confirm changes. The router will restart itself to activate the new setting. Y ou will notice all NA T or firewall settings disappear from the Advanced menu hereafter .
ADSL R outer Quick Set-up Guide (default http://192.168.1.1 ). Y ou will be prompted to enter the router’ s administrative user name and passwor d. By default, user name and password are both admin . 2. Go to Wireless > Basic . It is r ecommended that you use a SS I D of your choice.
Tips for security This Dynalink series of Broadcom chipset pow ered routers are highly powerful, secure and stable devices. T o ensure that you get the maximum benefit from your Dynalink router Dynalink makes the follo wing strong recommendations: Do: Change and keep secret your router’ s admin user name and password.
Indicator lights There are 8 indicators on the fr ont panel. Every time the router is pow ered on or reset, the DIAG light will come on indicating self-test is in progr ess. PWR DIAG LA N1 - LAN4 USB WLA N DSL Off Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Power off.
3. Disable any personal firewall or virus checker temporarily . If you are using Internet Explorer , go to T ools–Internet options-Security . Reset security level of all 4 icons to default . Y ou can revert to your customised settings after configuring the router .
If (A) fails but (B) shows a response, this is pr obably a DN S problem. Go to Procedure (2) of Section 4. Enter the r outer’ s I P (192.168.1.1) as DNS. If both (A) & (B) show a response, y our router is actually on line. The problem may be with your bro wser setting.
If the wireless client is already installed on the computer , an alternative is to go to the DOS prompt, type ipconfig /all. The M AC addr ess is shown under physical address as a group of 6 double digits. Q8. Can a wireless link suffer from r adio interference Other wireless devices and appliances on site may share the same 2.
NZRTA770WQG -02 Dynalink warrants this product against defects in materials and workmanship for a period of twelve months fr om the original date of purchase. W e will, at our discretion, repair or r eplace the faulty unit, free of charge, pro vided it is returned to us with proof of purchase fr om an authorised dealer within the warranty period.
An important point after buying a device Dynalink RTA770W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynalink RTA770W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynalink RTA770W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynalink RTA770W you will learn all the available features of the product, as well as information on its operation. The information that you get Dynalink RTA770W will certainly help you make a decision on the purchase.
If you already are a holder of Dynalink RTA770W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynalink RTA770W.
However, one of the most important roles played by the user manual is to help in solving problems with Dynalink RTA770W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynalink RTA770W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
