Instruction/ maintenance manual of the product XP-R220 Aiwa
Go to page of 8
C Highlighted letters in the text of this manual correspond to the illustrations. PRECAUTIONS T o maintain good performance • Do not use the unit in places which are extremely hot, cold, dusty or humid. In particular , do not use or keep the unit in following places.
C DC 2.4 V using two commercially available (Ni-Cd 1.2 V 700 mAh) rechargeable batteries AC house current using the supplied AC adaptor Maximum outside dimensions 130 (W) × 30.5 (H) × 130 (D) mm (excluding projecting parts and controls) (5 1 / 8 × 1 1 / 4 × 5 1 / 8 in.
USING ON RECHARGEABLE BA TTERIES → E • Be sure to use size AA Ni-Cd 1.2 V 700 mAh rechargeable batteries, which are commercially available. • Be sure to read the instructions of the purchased rechargeable batteries before use. • When using on rechargeable batteries for the first time, charge them until the battery indicator goes out.
XP-R220 (AU) E Page 1 y T o enter standby mode, press e PLA Y/P AUSE to start playback, then press s STOP/OFF/CHARGE. Adjusting the sound → G V olume T urn the VOL control to adjust the volume. DSL Press DSL repeatedly for more powerful sound and deeper bass.
B PLA YBACK → J Connect the supplied headphones to the PHONES/LINE OUT jack. The amplified speaker system can be connected instead to enjoy the CD sound.
B display changes to . Note • Y ou cannot back to previous track by pressing r during random play . • Y ou cannot select one-track repeat during random play .
RADIO RECEPTION T uning in to a station → O 1 Press BAND TUNER ON repeatedly to select AM or FM. 2 Press TUNING + ( t ) or - ( r ) to tune in to a station. After listening, press s STOP/OFF/CHARGE to turn of f the radio. For quick tuning Keep either TUNING + ( t ) or - ( r ) pressed for about 1 second.
XP-R220 (AU) E Page 2 U PHONES/ LINE OUT RL LINE IN CD IN AU X py p After listening, press s STOP/OFF/CHARGE to turn of f the radio. Changing the presetting 1 Press PRESET CALL UP/DOWN repeatedly to select the preset number you wish to change. 2 Keep ENTER/DISP pressed for 1 or more seconds until the preset number and the frequency flash.
An important point after buying a device Aiwa XP-R220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa XP-R220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa XP-R220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa XP-R220 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa XP-R220 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa XP-R220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa XP-R220.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa XP-R220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa XP-R220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
