Instruction/ maintenance manual of the product VX-C131U Aiwa
Go to page of 70
VX-C131 U OPERA TING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D'EMPLOI INTEGRA TED COLOR TV / VIDEO CASSETTE RECORDER TELEVISOR EN COLOR/VIDEOGRABADORA INTEGRADOS TELEVISOR COULEUR/MAGNET OSCOPE.
ENGLISH Warning To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equ.
ENGLISH OWNER'S RECORD For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below. Please refer to them when you contact your AIWA dealer in case of difficulty. Model No.
ENGLISH Welcome Thank you for purchasing this AIWA product. To optimize the performance of this unit, please read through this operating instructions carefully. Main featur es of this unit VCR Plus+ system and One- Touch Playback You can easily set the timer with the VCR Plus+ system.
ENGLISH Connecting the antenna Basic connections PREPARATION 2 1 4 75-ohm coaxial cable (not supplied) 300-ohm twin-lead cable (not supplied) Antenna adaptor (supplied) 1 2 To AC outlet Connect the antenna cable to the VHF/UHF connector on the unit. If the cable is a round-type 75-ohm coaxial cable, connect it directly to the VHF/UHF connector.
ENGLISH Connecting the antenna (continued) CA TV connections To connect a CATV system without using a CATV converter 2 To connect a CATV system using a CATV converter 1 2 1 3 Connect the cable from the CATV system to the VHF/UHF connector on the unit.
ENGLISH Preparing the remote control Inserting the batteries Caution To prevent damage from leakage or explosion, follow the descriptions below. • Insert two supplied R03 (size AAA) batteries with the 0 and 9 marks correctly as illustrated. • Do not mix old batteries with new ones or different types of batteries.
ENGLISH 1 2 3 4 5 Setting the language The on-screen menu can display three languages: English, Spanish and French. Before starting Set the TV VCR/CATV selector to TV VCR Press POWER to turn on the unit. Press MENU. When you press MENU for the first time after unpacking the unit, LANGUAGE/IDIOMA/LANGUE menu in step 5 appears.
ENGLISH Setting the clock You must set the date and time for timer recording. When you connect the AC cord to the AC wall outlet, the date and time will be set automatically if the unit receives the clock adjustment signal. If the unit cannot receive the clock adjustment signal or reception signal is weak, the unit may set the clock incorrectly.
ENGLISH 3 4 5 1 2 3 4 5 Setting the standard time according to your area When you move to a different area of the country, you can adjust the clock only with selecting your new area. This setting is only when connecting with the RF cable. Press MENU. Press SET/TRACKING + or – to select SYSTEM SET- UP, then press ENTER.
ENGLISH 1 2 3 4 Setting the channels Before Auto Channel Memory, this unit can receive all channels in your area by pressing the CHANNEL N or M button repeatedly. After Auto Channel Memory, you can skip the channels which are not preset with the CHANNEL N or M button.
ENGLISH 1 2 3 4 5 6 7 Checking the channel set-up to use VCR Plus+® system To set the timer using VCR Plus+ ® system, you have to check whether the VCR channel numbers match the guide channels which are assigned to the TV stations. If they do not match, the VCR Plus+ ® system does not function correctly.
ENGLISH W atching a TV program BASIC OPERATIONS 1 2 3 POWER PREV.CH CHANNEL N / M SLEEP Number buttons MUTING VOLUME + / – Earphone jack POWER VOLUME + / – CHANNEL N / M POWER indicator Press POWER to turn on the unit. The POWER indicator on the front lights.
ENGLISH Selecting the closed captions mode This unit can decode and display closed captioned television programs or tapes. Press CAPTION repeatedly to select the caption mode. The display changes as follows: Captions: This closed caption mode displays text on the screen in English or another language.
ENGLISH Press SET/TRACKING + or – to adjust the setting. After several seconds from releasing the button, the display returns to the normal screen. To adjust the other item, complete steps 4 through 5. Press MENU 3 times to return to the normal screen.
ENGLISH Setting the On-T imer Once this timer is set, the unit turns on at the programmed time to the programmed channel. Press MENU. Press SET/TRACKING + or – to select TV SET- UP, then press ENTER. Press SET/TRACKING + or – to select ON/OFF TIMER, then press ENTER.
ENGLISH Setting the Of f-T imer Once this timer is set, the unit turns off everyday at the programmed time. Before starting • Check that the clock is set correctly. • Set the TV VCR/CATV selector to TV VCR. Press MENU. Press SET/TRACKING + or – to select TV SET- UP, then press ENTER.
ENGLISH 5 6 7 8 PLAYBACK Playing back a tape Insert a cassette. • The power turns on automatically. • Playback starts immediately if the erasure prevention tab has been removed from the cassette. Press d PLAY to start playback. “ D ” of the D PLAY button on the unit lights.
ENGLISH Additional functions To watch a picture of the tape during fast- forward or rewind — Skip Search Press and hold g F FWD/ ] or f REW/ [ during fast- forward or rewind. The unit switches forward or reverse search and “ D ” of the D PLAY button on the unit flashes.
ENGLISH Playing back a tape repeatedly Before starting Set the TV VCR/CATV selector to TV VCR. Press MENU. Press SET/TRACKING + or – to select AUTO REPEAT. Press ENTER to select ON. Press MENU to return to the normal screen. Press d PLAY. The unit plays back the tape to the end, rewinds to the beginning, then repeats playback.
ENGLISH V arious search functions 1 2 Press CALL to display the tape counter. Press RESET at the point you want to locate later. The tape counter resets to “ 00:00:00. ” After playback or recording, press s STOP on the remote control or s / z STOP/EJECT on the unit, then press ZERO-RETURN.
ENGLISH 21 RECORDING Recording a TV program Before starting Set the TV VCR/CATV selector to TV VCR. Insert a cassette with its erasure prevention tab in place. The power turns on automatically. Press TAPE SPEED to select the tape speed, SP, LP or SLP.
ENGLISH Playing back the portion you just recorded – One-T ouch Playback Using One-Touch Playback after VCR Plus+ ® system (page 24) or manual timer recording (page 25) is convenient. You can make timer recordings and play back only the portion you just recorded with the timer by pressing a single button later.
ENGLISH 23 Recording with One-T ouch Recording You can immediately start recording the current channel for a specified time with One-Touch Recording. Before starting • Insert a cassette with its erasure prevention tab in place. Make sure the tape is longer than the recording time.
ENGLISH Press SET/TRACKING + or – to select ONCE, DAILY or WEEKLY. To record a single program daily program weekly program such as every Monday (WKL-MON) Press ENTER. • The following timer information appears on the screen. • If you want to change the setting here, see “ Changing the setting.
ENGLISH 25 Setting the timer with VCR Plus+ ® system (continued) To cancel a program Press MENU. And press SET/TRACKING + or – to select TIMER REC SET in the menu. Then press SET/TRACKING + or – to select the unnecessary program, and press CANCEL.
ENGLISH 6 7 8 5 The current day (Sunday) SUN-SAT (Sunday to Saturday) MON-SAT (Monday to Saturday) MON-FRI (Monday to Friday) WKL-SAT (Every Saturday) WKL-FRI (Every Friday) WKL-SUN (Every Sunday) One month later minus two days One month later minus one days .
ENGLISH Dubbing Connecting with another VCR Video camera (Player) To audio/video output jacks or Operation Before starting Select the tape speed. Insert a pre-recorded source cassette into another (playback) VCR. Insert a blank cassette with its erasure prevention tab in place into your VX-C131 (recording).
ENGLISH Enter the password (4 digits) using the number buttons (0-9), then press ENTER. •“ * ” appears instead of the number. • If you make a mistake, press CANCEL. Enter the same password again for the safety, then press ENTER. V-CHIP SET menu appears.
ENGLISH Press SET/TRACKING + or – to select the sub menu item, then press ENTER to select ON or OFF. • When TV-Y7 is selected, the item below appears. • When TV-PG or TV-14 is selected, the items below appear. • When TV-MA is selected, the items below appear.
ENGLISH 1 2 3 4 5 6 7 8 On-screen display Identifying the on-screen display items Tape operation mode indicators d : Play f : Rewind g : Fast-forward z : Cassette eject w : Recording a : Recording pause s : Stop OTR X:XX : Remaining time of One-Touch Recording To change the on-screen function display Press CALL.
ENGLISH If the unit does not seem to operate properly, read the instructions again, then check the following guide. TV reception is noisy or there is no TV reception. Connect the antenna correctly and securely. There is no picture or sound The unit is in LINE input mode.
ENGLISH Tuner system Frequency synthesized tuner TV system M Channel coverage VHF: 2 to 13 UHF: 14 to 69 CATV: 5A, A-1 to A-5, A to W, W+1 to W+84 Program memory 181 Antenna input 75 ohms, unbalanced Picture tube 208(W) × 211(H) mm (8 1 / 4 × 8 3 / 8 in.
ENGLISH VHF/ VHF/ UHF UHF AUDIO VIDEO OUT IN R L R L (MONO) (MONO) Parts and controls Front panel Rear panel AC cord Television screen Cassette compartment Antenna holder 33 Earphone jack LINE 2 IN VI.
FRANÇAIS Accessoires - Ne placez pas l’appareil sur un chariot, un support, un trépied, un montant ou une table instable. L’appareil risque de tomber et de causer de graves blessures, voire d’être gravement endommagé.
FRAN Ç AIS Surcharge - Evitez de surcharger les prises murales et les prolongateurs, car vous risquez de provoquer un incendie ou une d é charge é lectrique. Ne placez pas l ’ appareil dans un endroit o ù son cordon risque d ’ê tre pi é tin é .
FRAN Ç AIS Félicitations ! Nous vous remercions d ’ avoir fait l ’ acquisition de ce produit AIWA. Pour optimiser les performances de cet appareil, nous vous invitons à lire attentivement le pr é sent mode d ’ emploi.
FRAN Ç AIS AUDIO VIDEO OUT IN R L (MONO) VHF/ UHF Raccordement de l ’ antenne Raccordements de base PREPARATION 2 1 4 C â ble coaxial de 75 ohms (non fourni) C â ble bifilaire de 300 ohms (non fourni) Adaptateur d ’ antenne (fourni) 1 2 Vers une prise secteur Raccordez le c â ble d ’ antenne au connecteur VHF/UHF du t é l é viseur.
FRAN Ç AIS AUDIO VIDEO OUT IN R L (MONO) VHF/ UHF AUDIO VIDEO OUT IN R L (MONO) VHF/ UHF Raccordements CA TV Pour raccorder un syst è me CATV sans utiliser de convertisseur CATV 2 Pour raccorder un syst è me CATV avec un convertisseur CATV 1 2 1 3 Raccordez le c â ble du syst è me CATV au connecteur VHF/UHF du t é l é viseur.
FRAN Ç AIS Pr é paration de la t é l é commande Introduction des piles Attention Pour pr é venir tout dommage caus é par une fuite ou une explosion des piles, conformez-vous aux instructions suivantes. • Introduisez deux piles R03 (AAA) en faisant correspondre les p ô les 0 et 9 comme illustr é .
FRAN Ç AIS 1 2 3 4 5 S é lection de la langue d ’ af fichage Les é crans de menu peuvent ê tre affich é s dans l ’ une des trois langues suivantes : Anglais, Fran ç ais ou Espagnol. Avant de commencer... R é glez le s é lecteur TV VCR/CATV sur TV VCR.
FRAN Ç AIS R é glage de l ’ horloge Vous devez r é gler la date et l ’ heure manuellement pour effectuer des enregistrements par programmateur. Lorsque vous raccordez le cordon d ’ alimentati.
FRAN Ç AIS Appuyez sur SET/TRACKING + ou – pour s é lectionner HOLOGE AUTO. Appuyez sur ENTER pour s é lectionner ON. Appuyez deux fois sur MENU pour revenir à l ’é cran normal. R é glage de l ’ heure d ’é t é Appuyez sur MENU. Appuyez sur SET/TRACKING + ou – pour s é lectionner SYSTEME DE REGLAGE, et appuyez ensuite sur ENTER.
FRAN Ç AIS 1 2 3 4 S é lection des cha î nes Avant la m é moire de cha î ne automatique, cet appareil peut recevoir toutes les cha î nes captables dans votre zone g é ographique en appuyant plusieurs fois de suite sur la touche CHANNEL N ou M .
FRAN Ç AIS 1 2 3 4 5 6 7 WCBS New York CBS 02 02 WNBC New York NBC 04 04 WNYW New York NYW 05 05 WABC New York ABC 07 07 A&E Arts & Entertainment 39 44 BET Black Entertainment 57 23 CNBC Cons.
FRAN Ç AIS Regarder une é mission de t é l é vision Appuyez sur POWER pour mettre le t é l é viseur sous tension. L ’ indicateur POWER à l ’ avant s ’ allume. Appuyez plusieurs fois de suite sur CHANNEL N ou M , ou sur les touches num é riques pour s é lectionner le num é ro de cha î ne.
FRAN Ç AIS S é lection du mode de sous- titres Cet appareil peut d é coder et afficher les sous-titres de t é l é vision ou des cassettes vid é o.
FRAN Ç AIS Appuyez sur SET/TRACKING + ou – pour r é gler le param è tre s é lectionn é . Quelques secondes apr è s avoir rel â ch é la touche, l ’ affichage revient à l ’é cran normal. Pour r é gler un autre param è tre, ex é cutez les é tapes 4 à 5.
FRAN Ç AIS 15 R é glage du programmateur de mise sous tension Lorsque vous avez r é gl é ce programmateur, l ’ appareil se met sous tension à l ’ heure programm é e et syntonise la cha î ne programm é e. Avant de commencer... • V é rifiez si l ’ horloge est r é gl é e correctement.
FRAN Ç AIS 16 1 2 3 4 9 Appuyez sur SET/TRACKING + ou – pour afficher MARCHE et appuyez ensuite sur ENTER. L ’ indicateur ON-TIMER de l ’ appareil s ’ allume. Appuyez trois fois sur MENU pour revenir à l ’é cran normal. • A l ’ heure programm é e, la cha î ne passe à une cha î ne programm é e.
FRAN Ç AIS Appuyez sur SET/TRACKING + ou – pour r é gler l ’ heure et appuyez ensuite sur ENTER. Appuyez sur SET/TRACKING + ou – pour r é gler les minutes et appuyez ensuite sur ENTER. Pour changer les minutes par intervalles de dix minutes, maintenez la touche SET/TRACKING + ou – enfonc é e.
FRAN Ç AIS Pour Activer un arr ê t sur image Avancer rapidement la cassette Rembobiner la cassette Ejecter la cassette Rechercher vers l ’ avant à faible vitesse Rechercher vers l ’ avant à gr.
FRAN Ç AIS Conseils • Si vous appuyez sur la touche z EJECT de la t é l é commande ou Z STOP/EJECT de l ’ appareil alors qu ’ il se trouve hors tension, l ’ appareil é jecte la cassette.
FRAN Ç AIS Dif f é rentes fonctions de recherche 1 2 Appuyez sur CALL pour afficher le compteur de bande. Appuyez sur RESET à l ’ endroit que vous voulez retrouver ult é rieurement.
FRAN Ç AIS ENREGISTREMENT Enregistrement d ’ une é mission t é l é vis é e Avant de commencer... R é glez le s é lecteur TV VCR/CATV sur TV VCR. Introduisez une cassette dont l ’ onglet de protection contre l ’ effacement est intact. La mise sous tension est automatique.
FRAN Ç AIS 3 Appuyez plusieurs fois de suite sur CHANNEL N ou M , ou sur les touches num é riques pour s é lectionner sur le magn é toscope la cha î ne que vous voulez enregistrer. Pour s é lectionner une é mission CATV à l ’ aide des touches num é riques Mettez le s é lecteur TV VCR/CATV sur CATV.
FRAN Ç AIS Enregistrement avec la fonction monotouche La fonction d ’ enregistrement monotouche vous permet de d é marrer instantan é ment l ’ enregistrement de la cha î ne en cours pour une dur é e sp é cifi é e. Avant de commencer... • Introduisez une cassette dont l ’ onglet de protection contre l ’ effacement est intact.
FRAN Ç AIS R é glage du programmateur avec le syst è me VCR Plus+ ® Vous pouvez simplifier consid é rablement vos enregistrements par programmateur avec le syst è me VCR Plus+ ® .
FRAN Ç AIS Pour annuler un enregistrement programm é Appuyez sur MENU. Et appuyez sur SET/TRACKING + ou – pour s é lectionner PROG. ENR. Appuyez ensuite sur SET/ TRACKING + ou – pour s é lectionner le programme inutile, puis appuyez sur CANCEL.
FRAN Ç AIS 6 7 8 Pour annuler un programme S é lectionnez PROG. ENR. dans le menu. Appuyez sur SET/TRACKING + ou – pour s é lectionner le programme jug é inutile et appuyez ensuite sur CANCEL.
FRAN Ç AIS R L (MONO) VHF/ UHF OUT VIDEO AUDIO IN Copie Raccordement d ’ un autre magn é toscope Cam é scope (lecteur) Vers les prises de sortie audio/vid é o ou Fonctionnement Avant de commencer... s é lectionnez la vitesse de la bande. Introduisez une cassette source pr é enregistr é e dans l ’ autre magn é toscope (lecteur).
FRAN Ç AIS AUTRES FONCTIONS R é glage de la puce V Vous pouvez programmer une limitation suivant l ’â ge afin d ’ emp ê cher les enfants de regarder ou d ’é couter des sc è nes violentes ou des programmes pour adultes. Cet appareil est conforme à “ CLASS.
FRAN Ç AIS 3 R é glage de la puce V (suite) 5 V – CHIP CLASS. PROG. TV CLASS. FILM :OFF CHANGE. MOT DE P ASSE REGLAGE PUCE V :TV – Y :PG 6 4 VIOLENCE CONTEXTE SEXUEL LANGUE ADULTE ON ON ON :TV-MA REGLAGE CLASS. 29 Appuyez sur SET/TRACKING + ou – pour afficher le r é glage voulu et appuyez ensuite sur ENTER.
FRAN Ç AIS Modification du mot de passe Appuyez sur MENU. Appuyez sur SET/TRACKING + ou – pour s é lectionner PROG. FONC et appuyez ensuite sur ENTER. Appuyez sur SET/TRACKING + ou – pour s é lectionner REGLAGE PUCE V et appuyez ensuite sur ENTER.
FRAN Ç AIS Si l ’ appareil semble ne pas fonctionner correctement, relisez les instructions d ’ utilisation et consultez ensuite le guide ded é pannage suivant. La r é ception t é l é vis é e est parasit é e ou il n ’ y a pas de r é ception t é l é vis é e.
FRAN Ç AIS Tyntoniseur Syntoniseur à fr é quence synth é tis é e Syst è me de t é l é vision M Couverture des cha î nes VHF: 2 à 13 UHF: 14 à 69 CATV: 5A, A-1 à A-5, A à W, W+1 à W+84 M é moire de programmes 181 Entr é e d ’ antenne 75 ohms, asym é trique Tube image 208(L) × 211(H) mm (8 1 / 4 × 8 3 / 8 po.
FRAN Ç AIS VHF/ VHF/ UHF UHF AUDIO VIDEO OUT IN R L R L (MONO) (MONO) Composants et commandes Panneau frontal Panneau arri è re Cordon d ’ alimentation Crochet du cordon d ’ alimentation Support.
FRAN Ç AIS T é l é commande Touche VOLUME +/ – Touche POWER Touche VCR PLUS+ Touches num é riques (0-9) Touche INDEX Touche RESET Touche ZERO-RETURN Touche MUTING Touche AD-SKIP (omission publicit é s) Touche REC.
ENGLISH Remote control SLEEP button TV VCR/CATV selector CHANNEL N / M button OTPB (One-Touch Play Back) button w REC (Recording)/OTR(One- Touch Recording) button d PLAY button g F FWD (Fast-Forward)/ ] button PREV.
F or Assistance and Inf or mation, Call T oll Free 1-800-BUY -AIWA (United States and Puer to Rico) 8A-JTS-901-31 000620DTN-YX Printed in Thailand.
An important point after buying a device Aiwa VX-C131U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa VX-C131U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa VX-C131U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa VX-C131U you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa VX-C131U will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa VX-C131U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa VX-C131U.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa VX-C131U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa VX-C131U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
