Instruction/ maintenance manual of the product 8104HW-WALLARM Dukane
Go to page of 24
DUKANE CORP A V SER VICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www .dukane.com/av Information in this Guide may change due to product improvements. T o obtain the latest manuals, literature, and software please visit the Dukane web site at; www .
.
ENGLISH 1 HAS-K250 Wall mount unit for LCD proj ector s Model name 8104HW Us er ’s Manual The following symbols are used in this manual to help you use t his product safely and c orrect ly , and to preven t injur y to yourself and others or damage to propert y .
2 HAS-K250 Installation of this product requires spec ial tec hnical sk ills. Ask your dealer or ser vice c enter (for de tails, see the User’s Manual supplied with the LCD projector) to handle the installation work. Be sure to ob ser ve the fo llowing inst ruc tio ns when in stalling a n LCD projector.
ENGLISH 3 HAS-K250 W ARNING T o the customer ■ Do not attempt to install the projecto r yourse lf. Have y our dealer or ser vic e center handle all installation wor k. Note that w ill acce pt no liability what soever for accidents or injur ies resulting from an incor rect installation or improper use.
4 HAS-K250 Symbol Part name Quantity Appearance Symbol Part name Quantity Appearance A Arm assembly 1 G M4 × 8 hexagon head screws 4 BB r a c k e t 1 H M4 × 8 round head screws 4 CF r o n t c a p 1 I Alle n wrench 1 D Screw caps 8 J Te m p l a t e sheet 1 QT54601 60inch 208.
ENGLISH 5 HAS-K250 Remo ve the shipping scre ws from the arm assembly (A). The arm assembly (A) is assembled before shipping. Befo re att aching the ar m assembly to a wall, remove the two shipping screws (M5 sc rews with spring washer and flat washer ) as shown in the figure below.
6 HAS-K250 Remo ve the base bracket ( O ) from the arm assembly (A) . Before attaching the ar m assembly to a wall, remo ve the screws to disassemble it as shown in the figure below . Before disassembly , place the ar m assembly on a mat or the protec tive plastic it was shipped in to preven t damaging the floor or the bracket.
ENGLISH 7 HAS-K250 Attach the base bracket ( O) to a wall us ing the anchor bolts (M 1 0 ). The holes in the base bracket (O ) are oval to permit horizontal adjustment. For details on the length and number of the anchor bolt s (M1 0 ) that are required, see “T ools needed for installation” on page 2.
Screen center Screen center Screen thickness Wall hole center Amount of ver tical adjustm ent 42,5 195 (1,67) 125 (4,92) 136 (5,35) 32 (1,26) c 3 a c 2 85 (3,35) 240 c 1 c 4 b 30 30 (1,18) (1,18) (*1 ) Screen center 8 HAS-K250 1 6: 1 0 screen Bas e b ra cket at t ach men t dia gra m (Full screen : Reference value for 1,280 × 80 0 pixel image.
ENGLISH 9 HAS -K2 50 Scr een si ze s w he n u se d w i th Hi ta chi St ar Bo ard Projection size Aspect ratio Diagonal size (inches ) Dimensions Projection size Aspect ratio Diagonal size (inches ) Dimensions (*2): Sizes for a 4:3 aspect ratio setting.
10 HAS- K25 0 T e mpl ate sh eet us ag e Dete rmi ning loc atio n of wall hol es Place the template sheet (J) where you want to project the image. V er tical or ientation: Align th e top of the sheet with the upper edge of the image you want to project .
ENGLISH 1 1 HAS- K25 0 Adjust ing ar m len gth Arrows at t he right and lef t sides of the template sheet (J ) in dicate the distanc e from the sc reen sur fac e to the back of the projector. During rough adjustments of ar m length, adjus t it acc ording to the dimensio n of distance from the screen sur face to the back of the projec tor .
12 HAS-K250 (L) × 3 (N) × 1 Attach the bracket (B ) to the LC D projector using four M4 × 8 ( G) he xagon head screws. Tightening torque: 0.98 N•m (1 0 kgf•cm ) Attach the ar m (M) to the base bracke t (O ). Inser t the tab at the top of t he arm (M) in the groove at the top of the base bracket (O ).
ENGLISH 13 HAS-K250 Attach the LCD projector to which the bracket ( B ) has been at tached to th e adjusting block (Q ). Tighten the four M4 x 8 round head screws (H). Tightening torque: 0.98 N•m ( 10 k gf•c m ) Connect the cables to the projec tor .
14 HAS-K250 Adjustments T urn the projector on and project an imag e to make adjustments. - 1 . Project an image, adjust the image se t tings and focus on the LCD projector . • Adjust the focus. • Select MIRROR. • Set the D -ZOOM to its maximum value (full screen ).
ENGLISH 15 HAS-K250 Adjust the image. -1 . Loosen the securing screws. ( at the eight locations indicated by the arrows in the figure below) 1. Lo osen the screw on th e side of the arm. 2. Slide the ar m for ward and bac kward to adjust image size.
16 HAS-K250 1 . Fine adjustment of horizont al position 2. Fine adjustment of hor izontal key stone 3. Fine adjustment of ver tic al key stone 4. Fine adjust ment of late ral position 5. Fine adjust ment of image si ze 6. Fine adjust ment of focus For details, see the User’s Manual for the LCD projector .
ENGLISH 17 HAS-K250 7 . Fine adjustment of ver tic al position 1. Lo osen the screw on on the lower r ight side. 2. T urn the height adjusting screw to adjust t he height. 3. Af ter completing adjustments, retighten the loosened screw . Tightening torque: 0.
18 HAS-K250 -1 . The knobs indicat ed by the ar rows can be removed. Place them on the proj ections insi de the front ca p (C ) for storage. W ARNING ■ Adjusting knobs are small par ts that c ould be swallo wed by children and pets and should be kept out of their reach.
ENGLISH 19 HAS-K250 -2. Attach th e front cap (C ) at the front end of t he ar m (M). Engage the left, r ight and center claws. The adjusting knobs c an be removed. Place them on the projec tions inside the f ront cap (C ) for storage. -3.
20 HAS-K250 -5. At tach the a rm cover (E) to the arm (M). Inser t the eight claws in the ar m cover (E) in the eight holes in the arm (M). - 6. Assemble t he c abl e cover as shown in t he fig ure be low. Note: The cab le cover is sup plied w ith t he LCD projec tor.
ENGLISH 21 HAS-K250 (both 4:3 and 1 6: 1 0 screens) • Roll down sc reens and other screens that are not per fec t ly flat tend to subst antially distor t the projec tion sur fac e and cannot be used. Use board screens or ot her flat screens. Bead-t ype sc reens with a high screen gain are not suit able for this projector.
22 HAS-K250 Item Image movemen t Fine adjustment amount ( amount of LCD projector mo vement ) Descr iption of adjustment method Fine adjustment of horizontal position ±3° page 16 Fine adjustment of horizontal keystone ±3° page 16 Fine adjustment of ver t ic a l keyst on e ±3° page 16 Fine adjustment of lateral position ±20 mm (0.
An important point after buying a device Dukane 8104HW-WALLARM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dukane 8104HW-WALLARM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dukane 8104HW-WALLARM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dukane 8104HW-WALLARM you will learn all the available features of the product, as well as information on its operation. The information that you get Dukane 8104HW-WALLARM will certainly help you make a decision on the purchase.
If you already are a holder of Dukane 8104HW-WALLARM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dukane 8104HW-WALLARM.
However, one of the most important roles played by the user manual is to help in solving problems with Dukane 8104HW-WALLARM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dukane 8104HW-WALLARM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
