Instruction/ maintenance manual of the product NSX-R71 Aiwa
Go to page of 24
CD Stereo System En (English) 8C-NF6-906-01 020320AKH-U-M EZ NSX-R71 E (Español) F (Français) D (Deutsch) I (Italiano) NL (Nederlands) Cz ( Česky ) M (Magy ar) Po (Polski) OPERA TING INSTRUCTIONS M.
2 En PRECAUTIONS Read these Operating Instructions carefully and completely before operating the unit. All precautions on this booklet and on the unit should be strictly followed.
3 En T ABLE OF CONTENTS PRECAUTIONS .................................... 2 PREPARA TIONS ................................... 4 PAR TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TIONS ........ 8 CD OPERA TIONS ...................
4 En Connection Plug in the AC power cord to the wall socket after all other connections are made. 1 Connect the front speakers. Connect the right front speaker (marked "R" on the rear side) to the SPEAKERS R terminals and place it on the right side of the unit.
5 En Main unit: rear 1 CD DIGIT AL OUT (OPTICAL) jack Outputs CD digital sound signals to digital audio equipment. Remove the dust cap and connect using an optional optical cable plug. When this jack is not being used, attach the supplied dust cap. 2 MW/L W LOOP , FM 75 Ω terminals Plug in the supplied MW/L W and FM antennas here.
6 En 1 Dial Function Selects a function (T APE, TUNER, VIDEO/AUX or CD). DECK 1/2 Selects DECK 1 or 2 in T ape function. BAND Select a band in T uner function. 2 POWER 6 ST ANDBY/ON Switches the unit on and off (standby). DEMO/ECO When the unit is turned off: switches DEMO on and off.
7 En Remote control Buttons with the same or similar names with the main unit basically have the same function. 1 POWER GEQ Enters Graphic Equalizer setting mode. SOUND ENTER 2 0-9, +10 CD: selects a CD track of the specified number . Radio: tunes in to the station with the specified preset number .
8 En ADJUSTMENTS BEFORE OPERA TIONS Power Tu rning the unit on Press POWER 6 ST ANDBY/ON (POWER on the remote control). Tu rning the unit off Press POWER 6 ST ANDBY/ON again. The unit goes into standby . DEMO If the clock has not been set, a DEMO appears on the display when the unit is tur ned of f.
9 En Dimmer Adjusts the brightness of the display . 1 Press DEMO/ECO twice when the unit is turned on, and then within 4 seconds press ENTER. 2 Tu rn MUL TI JOG to select one of the three dimmer modes or " DIM-OFF ", and then press ENTER. " DIM-OFF " is the brightest and " DIMMER 3 " is the dimmest.
10 En This unit plays back finalized CD-R/RW discs as well as audio CDs. Playback 1 T urn the Dial Function to select the CD function and load disc(s). Press z CD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up.
11 En Programmed playback Plays back up to 30 selected tracks in programmed order . 1 Press SHIFT+PROGRAM on the remote control during stop. " PRGM " flashes on the display . 2 Press CD DIRECT on the remote control and then press the numbered button (1-3) within 3 seconds to select a disc.
12 En RADIO OPERA TIONS Manual tuning 1 Tu rn the Dial Function to select the TUNER function. 2 Press BAND to select a band (FM, MW or L W). 3 Press f or g to tune in to a station. " TUNE " is displayed when a station is tuned in. " 1 " lights up for FM stereo reception.
13 En T uning in to preset stations On the unit 1 Tu rn the Dial Function to select the TUNER function and press BAND to select a band. 2 Press d repeatedly or turn MUL TI JOG. With each press, the station with the succeeding preset number is tuned in.
14 En PTY Search The unit can search for a station broadcasting your desired PTY easily . T o do so, you need to preset ever y available station in advance since the unit searches only the preset stations. 1 Press PTY . 2 Press f or g to select a desired program type and then press PTY .
15 En Auto Graphic equalizer (AG) The unit automatically selects a sound equalization curve to match the music program type (PTY) data being transmitted from the station. (e.g. 'POP' curve is selected for POP M [PTY].) Press AG when tuning in to an RDS station.
16 En T APE OPERA TIONS Playback Use only type I (normal) tapes. 1 Tu rn the Dial Function to select the T APE function. 2 Press z PUSH EJECT/CLOSE on either side (DECK 1 and DECK 2) to open the outer cassette holder and insert the tape in the deck. Insert with the exposed side down and playback side facing out from the unit.
17 En Basic recording Use only type I (normal) tapes. DECK 2 is the recording deck. Only one side of the tape can be recorded at a time. 1 Insert the recording tape in DECK 2. Press z PUSH EJECT/CLOSE to open the outer cassette holder , and inser t with the exposed side down and the side to be recorded on facing out from the unit.
18 En 6 Press w REC/REC MUTE to start recording on side A. On the remote control, press REC MODE and then press w REC/REC MUTE within 3 seconds. The tape is rewound to the beginning of side A and recording starts. Go to the next step when recording on side A finishes.
19 En SOUND ADJUSTMENTS Grap hic equalizer Selects a sound equalization curve to match the music type. Press MODE once and then turn MUL TI JOG within 4 seconds to select one of the four equalization curves. On the remote control, press GEQ and then press PRESET N or M repeatedly within 4 seconds.
20 En TIMER OPERA TIONS Sleep timer Tu rn s off the unit automatically after a specified time. 1 Press SHIFT+SLEEP on the remote control. " SLP " appears on the display . 2 Press f or g repeatedly to set the sleep timer duration. With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes.
21 En To display the timer setting Press TIMER. The timer -on time, the source and the timer-activated duration are displayed for 6 seconds. Tip : T imer setting can be displayed even while the unit i.
22 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
23 En Specifications MAIN UNIT CX-NR71 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 16.8 dBf FM antenna terminal 75 ohms (unbalanced) MW tuning range 531 kHz to 1602 kHz (9 kH.
ADVARSEL! Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude af funktion. Undgå udsættelse for stråling. V AROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessaa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteiylle.
An important point after buying a device Aiwa NSX-R71 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa NSX-R71 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa NSX-R71 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa NSX-R71 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa NSX-R71 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa NSX-R71, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa NSX-R71.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa NSX-R71. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa NSX-R71 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
