Instruction/ maintenance manual of the product XDMP680 Dual
Go to page of 20
INSTALLATION/OWNER'S MANUAL AM/FM/CD/MP3/WMA Receiver with Detach Face XDMP680.
2 XDMP680 INSTALLATION Preparation TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start • Disconnect negative battery terminal.
3 XDMP680 INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio.
4 XDMP680 OPERATION Control Locations The XDMP680 allows playback of your favorite MP3 and WMA files recorded on CD-R and CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while maintaining near-CD sound quality.
5 XDMP680 OPERATION General Operation Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Remove trim ring and install supplied #1 x 7/32” Phillips hea d scre w thr oug h lef t side of moun tin g fra me in to fac epl ate .
6 XDMP680 OPERATION General Operation In tuner mode, press and hold DISP then press TUNE ll to select function priority display. “FREQ” will momentarily appear in the display.
Press AUDIO to select between Volume (default), Bass, Treble, Balance & Fader. Press AUDIO until BAS appears Rotate encoder left/right to adjust ( -6 minimum / +6 maximum) Press AUDIO until TRE.
Press TUNE nn or TUNE ll momentarily to seek the next strong station. Press TUNE nn or TUNE ll for more than 2 seconds, then release. "MANUAL" will momentarily appear in the display. Press TUNE nn or TUNE ll momentarily to move radio frequency up or down one step at a time.
Insert CD Eject CD Track Select Fast Forward and Reverse Pause Intro Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD.
10 XDMP680 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc MP3 Icon WMA Icon Folder Icon Displaying Information Character Support When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display.
11 XDMP680 OPERATION Press SEARCH for more than 3 seconds, to select between the following modes: • Direct File Select • Alphanumeric File or Folder Search • File or Folder Navigate Press SEARCH for more than 3 seconds, then release. “MP3 T * " or “WMA T * ” will flash in the display.
XDMP680 OPERATION 12 CD Player Operation - MP3/WMA Files Alphanumeric File or Folder Search Step 1 Step 2 Step 3 Step 4 Step 5 File/Folder Navigate Step 1 Step 2 Step 3 Step 4 *Folder Access (Up one level) Press SEARCH for more than 3 seconds, then release.
After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default. Press DISP momentarily to select clock, track name, directory name, title, artist, album, year or comment.
14 15 XDMP680 OPERATION The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
14 15 XDMP680 OPERATION An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only.
16 17 Limited One Year Warranty XDMP680 WARRANTY This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
16 17 Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.
18 Troubleshooting XDMP680 OPERATION Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage .
Notes XDMP680 OPERATION 19.
Dual Electronics Corp. Toll Free: 1-866-626-7863 www.dualav.com ©2006 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.
An important point after buying a device Dual XDMP680 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XDMP680 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XDMP680 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XDMP680 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XDMP680 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XDMP680, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XDMP680.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XDMP680. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XDMP680 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
