Instruction/ maintenance manual of the product XD5210 Dual
Go to page of 16
INSTALLATION/OWNERS MANUAL AM/FM/CD Receiver XD5210.
XD5210 INSTALLATION Preparation Please read entire manual befor e installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) •A void i.
XD5210 INSTALLATION Installation 3 TYPICAL MOUNTING METHOD.
Antenna Connector RCA Cable (sold separately) Remote Turn-On Connect to amplifier or power antenna. Insulate wire if not used. BLUE Rear Preamp Output Connect to amplifier RCA Input GRAY Ground Connect to vehicle chassis ground. BLACK .5 AMP AGC Fuse Accessory Connect to existing ignition circuit or switched 12 volt source.
XD5210 OPERATION Control Locations 5 Release V olume T une/T rack Up Band Bass Boost Eject Display Play/Pause A uto Stor e/Preset Scan Preset 6 Preset 5 Preset 4/CD Random Preset 3/CD Repeat Preset2/C.
XD5210 OPERATION 6 General Operation Press REL and pull away from the left side to remov e. To r e-install, insert right side of faceplate first then push left side to secure. *For semi-permanent faceplate installation, remove trim ring and install supplied Phillips head #1 screw through left side of mounting fr ame into faceplate.
XD5210 OPERATION General Operation 7 Press and hold for more than 2 seconds to RESET the unit upon initial installation or if abnormal operation occurs. The RESET button is located behind the faceplate. Press AUD to select between V olume (default), Bass, Tr eble, Balance & Fader .
XD5210 OPERATION Tuner Operation 8 Press TUNE << or >> momentarily to seek the next strong station. Press TUNE << or >> for more than 2 seconds, then press TUNE << or >> momentarily to move radio frequency up or down one step at a time.
XD5210 OPERATION CD Player Operation 9 With the label facing up, insert a standard 5" CD into the CD slot. The CD will automatically begin playback. Press the EJECT button to stop and eject the CD. The unit will change to tuner mode. Press TRACK >> to skip to the beginning of the next track.
XD5210 WARRANTY Limited One-Year Warranty 10 T his warranty gives y ou specific legal rights. Y ou may also have other rights which vary from state to state.
XD5210 OPERATION 11 Troubleshooting Error Codes Problem Cause Action Unit will not turn on (no power) Y ellow or red wire not connected or incorrect voltage Check connections for proper voltage (11~16.
Namsung America Inc. 21318 64th Ave. South Kent, W A 98032 T oll Free: 1-866-626-7863 www .dualav .com ©2004 Namsung America, Inc. EVOK0204-V01 XD5210 WARRANTY Specifications Signal-to-noise: >86dB Fr equency response: 20Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 16 Bit T uning range: 87.
INSTALLATION/OWNERS MANUAL Multi-fit 6.5" 2-way Car Audio Speakers DCS65.
2 DCS65 INSTALLATION Preparation/Installation Please read entir e manual before installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) Getting Started • Be sure to car efully read and understand the instructions befor e attempting to install the product.
3 DCS65 WARRANTY Limited One-Year Warranty T his warr anty gives you specific legal rights. Y ou may also have other rights which vary from state to state.
6.75" 1.7" .3" 4.9" 88Hz-15kHz, ±3dB 89dB 1W/1M 4 ohms 25 W atts 65 W atts Outside Diameter Mounting Depth Mounting Height Cut-out Diameter Frequency Response Sensitivity Impedance RMS Power Peak Power Namsung America Inc. 21318 64th Ave.
An important point after buying a device Dual XD5210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XD5210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XD5210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XD5210 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XD5210 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XD5210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XD5210.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XD5210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XD5210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center