Instruction/ maintenance manual of the product NSX-A304 Aiwa
Go to page of 64
88-NF8-903-01 971120AMI-M-9 For assistance and information call toll free I-800-BUY-AIWA (United States and Puerto Rico) mm DIGITAL AIJDIO.
“CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.” Owner’s record For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below.
4 5 Extension cord — To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug.
Check your system and accessories INSX-A3041 CX-NA303 Compact disc stereo cassette reciever SX-NA302 Front speakers * SX-R275 Surround speakers (For NSX-A304 only) Remote control AM antenna FM antenna m Operating Instructions, etc Before connecting the AC cord The rated voltage of your unit shown on the rear panel is 120 V AC.
3 4 Connect the supplied antennas. Connect the FM antenna to FM 75 Q terminals and the antenna to AM LOOP terminals. AM antenna Connect the AC cord to an AC outlet. AM CONNECTING AN OUTDOOR ANTENNA For better FM reception, use of an outdoor antenna recommended.
Inserting batteries Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries. @~e R6(AA) When to replace the batteries The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet).
T-BASS l-r I —.r. — B SHIFT T-BASS VOLUME Turn VOLUME on the main unit, or press VOLUME on the remote control. The volume level is displayed as a number from O to MAX (31). The volume level is automatically set to 16 when the power is turned off with the volume level set to 17 or more.
1 2 1 h 2 f-%—- ‘–— — --- –..... . . ---- — MONO TUNER BAND SHIFT Press TUNER/BAND repeatedly to select the desired band. When TUNER/BAND is pressed while the power is off, the power is turned on directly. To select a band with the remote control Press BAND while pressing SHIFT.
“ ,, # .-. p:.....,, .;, 4., =..,.,,! . PRESET”’N’UM’BE’RTUNiNG” “ Use the remote control to select the preset number directly. 1 2 Press BAND while pressing SHIFT to select a band. Press numbered buttons O-9 and +1 O to select a preset number.
I Press CD, then press A OPEN/CLOSE to open the disc compartment. Load disc(s) with the label side up. To play one or two discs, place the discs on tray 1 and 2. To tdav three discs, press DISC CHANGE to rotate the trays after placing two discs. Place the third disc on tray 3.
Use the remote control. RANDOM play All the tracks on the selected disc or all the discs can be played randomly. REPEAT play A single disc or all the discs can be played repeatedly, Press RANDOM/REPEAT while pressing SHIFT. Each time it is pressed, the function can be selected cyclically.
This section explains how to record from the tuner, CD player, or external equipment. 2 t+ - —,_,,,,,, ,,. Preparation “ Use Type I (normal) tapes only. ● Set the tape to the point where recording will start. ● Note that recording is done on only one side of the tape.
1,3 ■ 2 m Set the tape to the point where recording will start. 1 2 3 4 Press TAPE. Insert the original tape into deck 1 and the tape to be recorded on into deck 2. Insert the tapes with the sides to be played back or recorded on facing out from the unit.
MULTI f—3q7 JOG .–. ._ —. ~ ~-+ ~lf%==% - n 4 5 3,7 , 6,8-I!+==--- . “II 1 r=---’l . v I h I I I ‘Ml I The Al edit recording function enables CD recording without worrying about tape length and track length, When a CD is inserted, the unit automatically calculates the total track length.
In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape as the tracks are programmed. m The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.
1 2 3 i--r 11 1 9 1,2,3 2,3 r P--A-a 1 1 Press CLOCK, then press II seconds. SET within 4 When using the remote control Press CLOCK while pressing SHIFT, then press II SET !Mt!lin 4 seconds. Press + DOWN or > UP to designate the hour, then press II SET.
3 6 2,4 P 1 I 1 “[----- i ‘ A —1,2,3,4 ? -— —.. 9 .—— - 1 The unit can be turned on at a specified time every day with the built-in timer. Preparation Make sure the clock is set correctly. Use the remote control. 1 2 3 Press TIMER to display 0, then press II SET within 6 seconds.
CD DIGITAL OUT (OPTICAL) vIDEO/AUX SURROUND SPEAKERS Refer to the operating instructions of the connected equipment for details. ● The connecting cords are not supplied. Obtain the necessary connecting cords. ● Consult your local Aiwa dealer for optional equipment.
Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution.
SDeaker svstem SX-NA302 Main unit CX-NA303 FM tuner section Tuning range Usable sensivity (IHF) Antenna terminals AM tuner section Tuning range Usable sensitivity Antenna Amplifier section Power output Total harmonic distortion Inputs outputs Cassette deck section Track format Frequency response Recording system Heads 87.
.
I L!L!l DO NOT OPEN 1 /!LLJ “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 4 5 Cable de alimentacion de CA - Cuando desconecte el cable de alimentacion de CA, sujete la clavija de alimentacion de CA y tire de ells. No tire del propio cable. - Nunca maneje la clavija de alimentacion de CA con Ias manes mojadas porque podria producirse un incendio o una sacudida electrica.
Compruebe su sistema y Ios accesorios CX-NA303 Sintonizador, amplificador, piatina de casete y reproductor de discos compactos esttfweo SX-NA302 Altavoces delanteros * SX-R275 Altavoces de sonido ambiental (para el NSX-A304 solamente) Control remoto Antena de AM Antena de FM Manual de instrucciones.
3 4 *C I IIEWL Conecte Ias antenas suministradasi Conecte la antena de FM a Ios terminates FM 75 Q, y la antena de AM a Ios terminates AM LOOP. Antena de AM Antena de FM pfl @’ [ T Conecte el cable de alimentacion de CA a una toma de CA.
Insertion de Ias pilas Quite la tapa de Ias pilas, ubicada en la parte trasera del control remoto, e inserte dos pilas R6 (tamafio AA). R6(AA) Cuando reemplazar Ias pilas La distancia maxima de operation entre el control remoto y el sensor de sefiales de la unidad principal debera ser de 5 metros aproximadamente.
T-BASS ! VO1 .UME — [ 8 — ,,-_ — / SHIFT T-BASS VOLUME PHONES Gire VOLUME de la unidad principal o pulseVOLUME del control remoto. El nivel de sonido se visualiza mediante un numero del O al 31 (MAX). El nivel de sonido se ajusta automaticamente a 16 cuando se desconecta la alimentacion estando el nivel ajustado en 170 mas.
1 2 1 . . I -4 2 P .—— . I 8 — I ! l.—.— . .—. —- MONO TUNER BAND SHIFT Pulse repetidamente TUNER/BAND para seleccionar la banda deseada. FM - AM Cuando se pulse TUNEIWBAND mientras la alimentacion este desconectada, la alimentacion se conectara directamente.
SINTONIZACION MEDIANTE NUMERO DE PREAJUSTE Utilice el control remoto para seleccionar directamente el numero de preajuste. 1 2 Pulse BAND mientras pulsa SHIFT para seleccionar una banda, Pulse Ios botones numerados O-9 y +1 O para seleccionar un numero de preajuste.
- CLOSE Pulse CD, y Iuego pulse A OPEN/CLOSE para abrir el compartimiento de Ios discos. Introduzca el(los) disco(s) con el Iado de la etiqueta hacia arriba. Para rerxoducir uno o dos discos, ponga Ios discos en Ias bandejas 1 y 2. Para rerxoducir tres discos, pulse DISC CHANGE para hater girar Ias bandejas despues de colocar dos discos.
., REPRODUCTION ALEATORIA/FiEPETICION DE REPRODUCTION Utilice el control remoto. Reproduction aleatoria Todas Ias canciones del disco seleccionado o de todos Ios discos podran reproducirse aleatoriamente. Repetition de reproduction Un solo disco o todos ellos podran reproducirse repetidamente.
Esta seccion explica como grabar del sintonizador, del reproductor de discos compactos o de equipos exteriors. 2 Preparation ● Utilice solamente cintas tipo I (normales) ● Bobine la cinta hasta el punto donde vaya a empezar la grabacion. ● Tenga en cuenta que la grabacion solo se reaiiza en una cara de la cinta.
1,3 ■ 2 I---r- -q —. k-— ---+-- Y )_ —4 —2 Ponga la cinta en el punto donde vaya a empezar la grabacion. 1 2 3 4 Pulse TAPE. Inserte la cinta original en la platina 1 y la cinta que vaya a grabar en la platina 2. Inserte Ias cintas con Ias caras que vaya a reproducer o grabar hacia afuera de la unidad.
MULTI > f—3,7 JOG 2 4 5 ■ 4 3,7 6,8 1,8 La funcion de grabacion con edition Al permite grabar discos compactos sin preocuparse de la duration de la cinta y de Ias canciones, Cuando se inserte un disco compacto, la unidad calculara automaticamente la duration total de Ias canciones.
MULTI r 3,7,8,9 JOG r,. — ~_. —1 – -/2 - I I 1! ,9 8,10 11 r . . . . . 1,10 En la funcion de grabacion con edition programada, Ias canciones pueden programarse mientras se comprueba el tiempo restante de cada cara de la cinta segtin se programan Ias canciones.
RELOJ?@#;_ADOR -.= .!%.. )” , , 1 2 3 Ii I 1,2,3 2,3 1 Pulse CLOCK y Iuego pulse II SET antes de aue pasen 4 seaundos. Cuando se utilice el control remoto Pulse CLOCK mientras pulsa SHIFT, y Iuego pulse II SET antes de que pasen 4 seaundos. Pulse - DOWN o ~ UP para designar la hors, y Iuego pulse II SET.
) .. I I Y 1 f-”- [ 6 ❑ r —— .._ _.. .—— ■ —— I 2,4 1,2,3,4 La unidad podra encenderse a la hors especificada todos Ios alias gracias al temporizador incorporado. Preparation Asegurese de que la hors del reloj sea corrects. Utilice et control remoto.
F ~ CD DIGITAL OUT T ‘OpT’cAL) I E !2 g E mm — 1 ‘ I VIDEO/AUX m — I SURROUND m SPEAKERS 4 Consulte el manual de instrucciones del equipo conectado para tener mas detalles. ● Los cables de conexion no han sido suministrados. Obtenga Ios cables de conexi6n necesarios.
El mantenimiento y el cuidado ocasional de la unidad y del software resultan necesarios para optimizar Ias prestaciones de su unidad. Para Iimpiar la caja Utilice un parlo blando y seco. Si Ias superficies estan muy sucias, utilice un pafio suave humedecido un poco en una solution de detergente suave.
Unidad principal CX-NA303 Seccion del sintonizador de FM Gama de sintonizacion 87,5 MHz a 108 MHz Sensibilidad util (IHF) 13,2 dBf Terminals de antena 75 ohmios (desequilibrada) Seccion del sintonizad.
.
Releve du proprietaire Pour plus de commodite, rioter Ie numero de modele et Ie numero de serie (ces numeros se trouvent au dos de I’appareil) clans Ies cases ci-dessous. Priere de mentioner ces numeros quand on contacte un distributeur Aiwa en cas de difficult.
3 4 5 Cordon d’alimentation secteur - Pour debrancher Ie cordon d’alimentation secteur, Ie tirer par sa fiche. Ne pas tirer sur Ie cordon proprement alit. - Ne jamais tenir la fiche d’alimentation secteur avec Ies mains mouillees, cela pourrait se traduire par un court-circuit ou un choc electrique.
Contr61er la chaine et Ies accessoires. CX-NA303 Radio magnetocassette Iecteur de disques compacts stereo SX-NA302 Enceintes avant * SX-R275 Enceintes surround (Pour NSX-A304 seulement) Telecommande A.
3 Connecter Ies antennes fournies. Connecter I’antenne FM aux bornes FM 75 Q et I’antenne AM aux bornes AM LOOP. ne AM L 4 Brancher Ie cordon secteur a une prise de courant. mm Quand on branche Ie cordon secteur, tous Ies caracteres peuvent s’allumer sur I’affichage.
Mise en place des piles Enlever Ie couvercle des piles du dos de la telecommande et mettre deux piles R6 (taille AA) en place. R6(AA) Quand remplacer Ies piles La distance maximale de fonctionnement de la telecommande entre cette derniere et Ie capteur situe sur I’appareil principal doit 6tre d’environ cinq metres.
VOLUME — -t I SHIFT T-BASS VOLUME VOLUME Tourner VOLUME de I’appareil principal, ou appuyer sur VOLUME de la telecommande Le niveau du volume est affiche sous la forme d’un nombre de O a MAX (31). Quand on coupe I’alimentation alors que Ie niveau du volume est regle a 17 ou plus, ce niveau est automatiquement regle a 16.
1 2 ,- 1 J-? 2 f —— -–. / 1 MONO TUNER BAND SHIFT u .—. Appuyer sur TUNER/BAND a plusieurs reprises pour selectionner la gamme souhaitee. FM — AM Quand on appuie sur TUNEFUBAND alors que I’alimentation est toupee, I’appareil est mis sous tension directement.
ACCORD SUR UNE STATION MEMORISEE Utiliser la telecommande pour selectionner Ie numero de prereglage directement. 1 Appuyer sur BAND tout en appuyant sur SHIFT pour selectionner une gamme. 2 A l’aide des touches numeriques O-9 et +10, selectionner un numero de prereglage.
LECTURE ~EDIT/CHECK ANDOMI EPEAT 0-9,+10 SHIFT Appuyer sur CD, puis appuyer sur A OPENICLOSE pour ouvrir Ie compartment a disques. Mettre Ie(s) disque(s) en place avec I’etiquette en haut. Pour Iire un ou deux disaues, mettre Ies disques sur Ies plateaux 1 et 2.
Utiliser la telecommande. Lecture aleatoire Toutes Ies plages du disque selectionne ou tous Ies disques peuvent ~tre Iues clans un ordre aleatoire. Lecture repetee Un seul disque ou tous Ies disques peuvent &re Ius a plusieurs reprises. Appuyer sur RANDOM/REPEAT tout en appuyant sur SHIFT.
Cette partie explique comment enregistrer a partir du tuner, du Iecteur de disques compacts ou d’un appareil externe. h I —— ,–— —.. -- -- ---–——- Preparation ● Utiliser seulement des cassettes de type I (normales). ● Bobiner la cassette jusqu’a I’endroit ou on veut demarrer I’enregistrement.
1,3 ■ 2 II T — T -) L I ._—–. ..’ 1 ..— .— - ~ Bobiner la cassette jusqu’a I’endroit ou on veut demarrer I’enregistrement. 1 2 3 4 Appuyer surTAPE. Inserer la cassette originale clans la platine 1 et la cassette a enregistrer clans la platine 2.
.- MULTI x (-3,7 JOG 2 4 5 ■ 4 3,7 6,8 U --- La fonction enregistrement avec montage et calcul du temps permet d’enregistrer a partir de disques compacts saris se preoccuper de la duree de la cassette et des durees des plages. Quand on met un disque compact en place, I’appareil calcule automatiquement la duree totale des plages.
. .. -. I , . . ... . 8,10- !+$ / — 1,10 ~x- I ● 8 1 t- — La fonction enregistrement avec montage programme permet de programmer Ies plages tout en contr61ant Ie temps restant sur chaque face de la cassette au fur et a mesure de la programmation.
TERIE 1 2 3 ■ 1,2,3 2,3 u- -- 1 -w ! —1 / —.— Appuyer sur CLOCK puis appuyer sur II clans Ies auatre secondes. Quand on utilise la telecommande Appuyer sur CLOCK tout en appuyant sur SHIFT, SET puis appuyer sur II SET clans Ies auatre secondes.
1 2,4 I I f 8 J-V- — 1+ 1 1,2,3,4 -8 f 1 _____________ ____ .__./ Avec la minuterie integree, I’appareil peut i%re mis sous tension chaque jour a I’heure specifiee. Preparation S’assurer que I’horloge est reglee correctement. Utiliser la telecommande.
F ] CD DIGITAL OUT v ‘OpT1cAL) ! Q D = — I I VI DEO/AUX m — I SURROUND m SPEAKERS Pour plus de details, se reporter au mode d’emploi de I’appareil connecte. ● Les cordons de raccordement ne sent pas fournis. Se procurer Ies cordons necessaires.
Un entretien et des soins reguliers de I’appareil et des disques et cassettes sent necessaires pour assurer un fonctionnement optimal. Nettoyage du coffret Utiliser un chiffon doux et sec. Si I’appareil eSt extr~mement sale, utilser un chiffon doux Iegerement imbibe d’une solution detergence deuce.
Appareil principal CX-NA303 Partie tuner FM Plage d’accord Sensibility utile (IHF) Bornes d’antenne Partie tuner AM Plage d’accord Sensibility utile Antenne Partie amplificateur Puissance de sor.
.
.
.
o Q Q Q (3 o e c) Name/Nombre/Nom Page/Pagina/Page @ TAPE DECK1/2 ..... .. ... ..... ... ..... ... ..... .. ... ..... ... . 8,12 TUNER/BAND .... .. ... ..... ... ..... ... ..... ... .. ..... ... .... 7 VIDEO/AUX ..... ... .. ..... ... ...... .. ......
An important point after buying a device Aiwa NSX-A304 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa NSX-A304 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa NSX-A304 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa NSX-A304 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa NSX-A304 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa NSX-A304, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa NSX-A304.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa NSX-A304. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa NSX-A304 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
